List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Detection System for Determining the Concentration, Size, and Depth of Buried Radioactive Material

    SBC: Shonka Research Associates            Topic: N/A

    N/A

    SBIR Phase II 1996 Nuclear Regulatory Commission
  2. A Detection System for Determining the Concentration, Size, and Depth of Buried Radioactive Material

    SBC: Shonka Research Associates            Topic: N/A

    N/A

    SBIR Phase I 1995 Nuclear Regulatory Commission
  3. A Low Cost AIS Class B Compliant Small Vessel Tracking and Collision Avoidance System

    SBC: International Maritime Information Systems USA, LLC            Topic: N/A

    The goal of this proposed research is to determine the feasibility of developing and commercializing an innovative, low cost, high performance small boat tracking and collision avoidance device. Small boats are defined as being floating craft that fall into the category of port vessels, leisure, un-powered and small fishing craft. The device would be compatible with the Automatic Identification Sy ...

    SBIR Phase I 2004 Department of Homeland Security
  4. A Reactive Coating for Air Purification

    SBC: ELTRON RESEARCH & DEVELOPMENT, INCORPORATED            Topic: CBD11107

    This SBIR Phase I project addresses development of a self-cleaning coating for removing air-borne chemical and biological species. The coating materials possess impressive properties e.g., ambient temperature adsorptive and low temperature thermal catalytic oxidation activity towards VOCs; electrochemical activity for hydrocarbon oxidation, and oxygen evolution. Evidence of photocatalytic activi ...

    SBIR Phase I 2011 Department of DefenseOffice for Chemical and Biological Defense
  5. Adaptation of Advanced Technology for Ordnance Surveillance to a Marine Asset Tag Tracking System

    SBC: PHASE IV ENGINEERING, INC.            Topic: N/A

    In Phase I, Phase IV proposes to develop the overall architecture and design of a prototype RF system for shipping containers that will operate in the marine environment while being loaded stacked aboard ship, on board deck of a ship in a stack, unloaded, and moved and stacked in shipping terminals. Phase IV has developed a state-of-the-art RF system for tracking and monitoring munitions, both at ...

    SBIR Phase I 2004 Department of Homeland Security
  6. Adhesively Bonded Electrospun Membranes for Protective Clothing

    SBC: COHERENT TECHNOLOGIES, INC.            Topic: N/A

    Standoff detection, identification and tracking of chemical and biological warfare agents is critical to provide hazard warning and dewarning for forces and civilians, and to minimize disruption in deployment of forces. Differential Absorption Lidar(DIAL) can be used for remote sensing of chemical agents via their spectral signatures at MWIR and LWIR wavelengths. However, current gas-laser DIAL ...

    SBIR Phase I 2001 Department of DefenseOffice for Chemical and Biological Defense
  7. Advanced high-efficiency semiconductor neutron detectors of annular ring design

    SBC: Mocha Technologies, Inc.            Topic: N/A

    This proposal is for the design and development of advanced high-efficiency semiconductor thermal neutron detectors in both silicon and silicon carbide. These detectors will provide detectors with neutron conversion efficiency exceeding 40%, depending on detector configuration. The use of annular ring design features eliminates neutron streaming and other undesirable effects of previous perforated ...

    SBIR Phase I 2007 Department of Homeland Security
  8. ARCH Technology for a Simple, Resilient, and Cost Effective Auto-Injector

    SBC: AKTIVAX, INC.            Topic: CBD13106

    ARAI auto-injector platform was developed from the ground up to meet the DoD requirements for a Next Generation auto-injector, and offersimproved Human Factors, improved drug stability, extremely robust, glass free construction, and versatility to accommodate a broad range oftreatments and treatment combinations, in terms of dose volumes, drug formats including wet, wet-wet, and wet-dry combinatio ...

    SBIR Phase II 2017 Department of DefenseOffice for Chemical and Biological Defense
  9. ARCH Technology for a Simple, Resilient, and Cost-Effective Auto- Injector

    SBC: AKTIVAX, INC.            Topic: CBD13106

    A prefilled auto-injector device for storing a beneficial agent in a dry and stable format alongside a diluent, and automatically delivering the beneficial agent to a patient after reconstitution. The device comprises an automatic needle insertion mechanism and automatic needle retraction mechanism and is safe and disabled after use. The primary drug container of the auto-injector is made from ...

    SBIR Phase I 2013 Department of DefenseOffice for Chemical and Biological Defense
  10. ARCH Technology for a Simple, Resilient, and Cost-Effective Auto- Injector

    SBC: AKTIVAX, INC.            Topic: CBD13106

    AktiVax is developing ARAI, a versatile auto-injector platform that is robust, light-weight, intuitive and simple for self-administration of medical countermeasures. ARAI is designed with the Warfighter in mind for handling and operation single-handedly with compromised dexterity, while wearing protective gloves and gear . ARAI is a versatile platform that can be adapted to a range of payloads, i ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government