You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Adaptation of Advanced Technology for Ordnance Surveillance to a Marine Asset Tag Tracking System

    SBC: PHASE IV ENGINEERING, INC.            Topic: N/A

    In Phase I, Phase IV proposes to develop the overall architecture and design of a prototype RF system for shipping containers that will operate in the marine environment while being loaded stacked aboard ship, on board deck of a ship in a stack, unloaded, and moved and stacked in shipping terminals. Phase IV has developed a state-of-the-art RF system for tracking and monitoring munitions, both at ...

    SBIR Phase I 2004 Department of Homeland Security
  2. A Detection System for Determining the Concentration, Size, and Depth of Buried Radioactive Material

    SBC: Shonka Research Associates            Topic: N/A

    N/A

    SBIR Phase II 1996 Nuclear Regulatory Commission
  3. A Detection System for Determining the Concentration, Size, and Depth of Buried Radioactive Material

    SBC: Shonka Research Associates            Topic: N/A

    N/A

    SBIR Phase I 1995 Nuclear Regulatory Commission
  4. Advanced high-efficiency semiconductor neutron detectors of annular ring design

    SBC: Mocha Technologies, Inc.            Topic: N/A

    This proposal is for the design and development of advanced high-efficiency semiconductor thermal neutron detectors in both silicon and silicon carbide. These detectors will provide detectors with neutron conversion efficiency exceeding 40%, depending on detector configuration. The use of annular ring design features eliminates neutron streaming and other undesirable effects of previous perforated ...

    SBIR Phase I 2007 Department of Homeland Security
  5. A Low Cost AIS Class B Compliant Small Vessel Tracking and Collision Avoidance System

    SBC: International Maritime Information Systems USA, LLC            Topic: N/A

    The goal of this proposed research is to determine the feasibility of developing and commercializing an innovative, low cost, high performance small boat tracking and collision avoidance device. Small boats are defined as being floating craft that fall into the category of port vessels, leisure, un-powered and small fishing craft. The device would be compatible with the Automatic Identification Sy ...

    SBIR Phase I 2004 Department of Homeland Security
  6. A Model-Based Solution to Improve the Accessibility and Affordability of Manufacturing System Simulations

    SBC: MBSE Tools, Inc.            Topic: NA

    The vision is to provide decision-makers with effective, fast, and inexpensive analysis tools to answer "What-If" and "What-Should" questions about manufacturing systems. Value Stream Mapping (VSM) is a modeling methodology with widespread contemporary use in manufacturing, and our strategy is to start with VSM as a deployment beachhead for the eventual deployment of a more generic manufacturing s ...

    SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology
  7. A Multi-Representation Architecture for STEP AP-210-based PCB Stackup Design and Warpage Analysis

    SBC: INTERCAX, LLC            Topic: N/A

    The objective of this Phase 1 effort is to demonstrate the feasibility of printed circuit assembly (PCA) warpage simulation through a novel combination of advanced AP210-based printed circuit board (PCB) simulation methods and cutting-edge general-purpose mesh generation tools. Our proposed solution, the extended multi-representation architecture (MRA), embodies an innovative approach that combine ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  8. A Multi-Representation Architecture for STEP AP210-based PCB Stackup Design and Warpage Analysis

    SBC: INTERCAX, LLC            Topic: N/A

    This effort creates foundations for highly automated simulation tools that predict warpage in printed circuit boards and assemblies (PCAs/PCBs) and chip packages. Our technique, MHS, provides core capabilities to automate warpage and other problems that were impractical until now. MHS extends a multi-representation approach the PI first conceived at Georgia Tech for CAD-CAE interoperability. This ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  9. An Extensible 6DOF Vision Framework for Accurate Location and Pose Estimation in a Scene Graph Context

    SBC: ROADNARROWS LLC            Topic: 9051173R

    RoadNarrows proposes a novel architecture to be implemented in a 6DOF vision system with applications in autonomous robotics. The system will report objects of interest along with location and pose information to a supervising computer. This system will be built around an advanced 3D vision platform that can deliver multiple video streams and 3D spatial measurements. The sensors will deliver high- ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  10. An Innovative Mass Spectrometer to Simplify Materials Characterization for Additive Manufacturing

    SBC: EXUM INSTRUMENTS, INC.            Topic: 2

    Characterizing the chemical components of additive manufacturing feedstock powders determines the final parts’ material properties and performance. Currently, feedstock chemical characterization involves multiple analytical techniques and industry standards. Although traditional spectrometry measures both the material’s major and residual constituents, it requires a highly trained analytical c ...

    SBIR Phase I 2021 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government