You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Removal of Oil and AFFF from Wastewater by Air-Sparged Hydrocyclone Technologies, Inc.

    SBC: Advanced Processing Tech.,            Topic: N/A

    A rang of AF activities generate wastewater containing oily substances, emulsion=stabilizing agents, and insoluble materials, including Aqueous, Film-Forming Foam (AFFF). US AF is searching for a cost effective method to handle the problem. This problem in reality refers to two issues: a) removal of oil from wastewater and b) removal of AFFF from the wastewater. The AFFF is a fire-fighting fo ...

    SBIR Phase I 1995 Department of DefenseAir Force
  2. Noninvasive Sensor for Measuring the Partial Pressure of Oxygen in Humans

    SBC: ANHOLT TECHNOLOGIES, INC.            Topic: N/A

    The air of this proposal is to develop a noninvasive probe that may be placed near, but not on, the patient or the patient's wound, to measure the partial pressure of dissolved oxygen in the interstitial body fluids. The sensor is capable of assessing gas pressure levels in a graduated fashion from superficial to deep, in both healthy and compromised tissues. The sensitivity is sufficient to mon ...

    SBIR Phase I 1995 Department of DefenseAir Force
  3. Turbulent Drag Reduction Using Sub-Acoustic Shell Modes

    SBC: APTEK, Inc.            Topic: N/A

    A versatile, low profile actuator for incrasing aircraft performance by decreasing frictional drag is proposed. The concept dcan completely internal to the aircraft, and requires no pats, orifices, or strutures extending into the flow field which may become fouled. The Phase I effort consists of a wind tunnel experiment to determine the range of operability of the actuator. An interim effort is al ...

    SBIR Phase II 1995 Department of DefenseAir Force
  4. Acoustic Monitor for Buried Structure Detection

    SBC: APTEK, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  5. High Power-Density Linear Motor Actuator for Flight Control Systems Applications

    SBC: BONNEVILLE SCIENTIFIC, INC.            Topic: N/A

    A number of technical studies have concluded that the replacement of an aircraft's hydraulic systems with electrical actuation would result in substantial cost savings and increased reliability. Unfortunately, conventional electrical motors used in actuators have inherently low load capacity. Therefore, mechanical force amplifiers such as gear trains or ball/roller screws are coupled to the motor ...

    SBIR Phase I 1995 Department of DefenseAir Force
  6. Phased Array Liquid Crystal Beamsteerer

    SBC: BOULDER NONLINEAR SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  7. A Massively Parallel Liquid Crystal Fourier Transform Spectrometer

    SBC: BOULDER NONLINEAR SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  8. Open Atmosphere In Situ Processing of Termal Control Thin Films for Spacecraft

    SBC: CCVD, Inc dba MicroCoating Technologies (MCT)            Topic: N/A

    Combustion chemical vapor deposition (CCVD), which was invented by the principal investigator, is the only open atmosphere CVD technique for ceramics and metals. The CCVD method has been shown to inexpensively and quickly apply dense, adherent, epitaxial thin films in a continuous manner. This technology can be used for the production of thermal control coatings onto spacecraft even after assemb ...

    SBIR Phase I 1995 Department of DefenseAir Force
  9. An Innovative All Solid-State Laser Source for Direct and Coherent Detection LIDAR

    SBC: COHERENT TECHNOLOGIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  10. A New Fabrication Technology for High-Toughnexx Ceramic Bearing Races for Advanced Turbine Engines

    SBC: Colorado Engrg Research Labora            Topic: N/A

    Ceramics offer higher temperature capability, lower density, and higher fatigue lifetimes compared to bearing steels. Low damage tolerance and fracture toughness of ceramics has eliminated their consideration for bearing raceways. Colorado Engineering Research Laboratory (CERL) is proposing a completely new fabrication technology to make Si*3*N*4* ceramic-matrix composite (CMC) bearing rings wit ...

    SBIR Phase I 1995 Department of DefenseAir Force
US Flag An Official Website of the United States Government