For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. In-Situ Strain Measurements in Concrete by Use of Fiber-Optics

    SBC: Vixel Corp. (old: Photonics            Topic: N/A


    SBIR Phase II 1996 Department of DefenseNavy
  2. An Innovative All Solid-State Laser Source for Direct and Coherent Detection LIDAR

    SBC: COHERENT TECHNOLOGIES, INC.            Topic: N/A

    We introduce an innovative laser which brings inherently new capabilities to lidar that were not available with other coherent lidar laser sources. The unique design of this laser allows production of a greater range of pulse widths and energies than was previously obtainable from a single source. This 1.56 um eye-safe laser utilizes an intracavity Solid State Raman Shifter (SSRS) which is pumpe ...

    SBIR Phase II 1996 Department of DefenseAir Force
  3. Multi-Resolution Tracking for Fire-Control

    SBC: Data Fusion Corporation            Topic: N/A

    Data Fusion Corporation (DFC), Wright State University, and Unisys Systems Corporation will jointly develop a computationally scalable multiresolution approach for air-to-air tracking and data association. This approach features a wavelet-based multiresolution approach to track estimation. This multiresolution approach permits dynamic regulation of computational burden through control of both sp ...

    SBIR Phase II 1996 Department of DefenseAir Force
  4. Title missing

    SBC: Silicon Mountain Design, Inc.            Topic: N/A


    SBIR Phase II 1996 Department of DefenseAir Force
  5. Fuel Reforming Systems for High Mach Aircraft

    SBC: TDA Research, Inc.            Topic: N/A

    Aircraft designed for high Mach number flight must incorporate active cooling in the turbo-ramjet propulsion system. The required cooling can be provided by endothermic reactions of the fuel prior to combustion. TDA Research proposes to investigate hydrocarbon reforming reactions as a method of absorbing heat on high Mach number aircraft. Hydrocarbon reforming reactions are very endothermic and ...

    SBIR Phase II 1996 Department of DefenseAir Force
  6. Advanced InP-Based DDS System (Q-DOT Research Proposal 39-1385)

    SBC: Q-DOT, INC.            Topic: N/A

    An advanced wideband (>2GHz), fast-switching (

    SBIR Phase II 1996 Department of DefenseAir Force
  7. Acoustic Monitor for Buried Structure Detection

    SBC: APTEK, Inc.            Topic: N/A

    We propose to apply a non-intrusive embedded acoustic sensor concept, which has been used successfully in reentry vehicle aerodynamics applications for detecting exterior flow conditions to penetrator munitions for detecting various media and buried structures during penetration. This effort includes: review of existing data and literature to choose promising signal characteristics for media and ...

    SBIR Phase II 1996 Department of DefenseAir Force
  8. Polarization Insensitive Liquid Crystal Spatial Light Modulator for Adaptive Optics

    SBC: MEADOWLARK OPTICS, INC.            Topic: N/A

    A polarization insensitive liquid crystal spatial light modulator is proposed as an alternative technology for currently deployed adaptive optic systems. Potential benefits of this approach include cost savings, weight reduction, lower power requirements, and improved performance. System response and polarization sensitivity are the two system parameters which will be investigated and optimized.

    SBIR Phase II 1996 Department of DefenseAir Force

    SBC: IonEdge Corp.            Topic: N/A

    Zinc and cadmium electroplating in cyanide baths is known to generate large quantities of hazardous solid and liquid waste. As a consequence, an innovative dry plating process has been developed. This process would eliminate liquids, and minimize solid waste using situ reclaim. This plasma assisted dry plating would be an economical alternative to electroplating. In recent years, zinc-cadmium allo ...

    SBIR Phase II 1996 Department of DefenseNavy
  10. All Dry Processing of Amorphous Silicon Photoresists


    An inorganic photoresist system involving only dry processing has many potential uses in microelectronic fabrication. Reduced wafer contamination and simpler waste disposal requirements will provide a strong driving force for replacing existing wet photolithographic processes with the new system. At the completion of this project, a new inorganic resist system utilizing hydrogenated amorphous si ...

    SBIR Phase II 1996 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government