Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. 12U Agile Inspector CubeSat

    SBC: ExoTerra Resource, LLC            Topic: AF171074

    ExoTerra's 12U Agile Inspector CubeSat uses technology developed for deep space NASA missions to enable transit from LEO to GEO by a 12U CubeSat. This enables an affordable mission that can improve the ability to observe objects in GEO by over an order of magnitude. The system uses an iodine electric propulsion system and high specific power solar arrays to provide over 6 km/s of delta V at the h ...

    SBIR Phase I 2017 Department of DefenseAir Force
  2. A Compact CO Oxidation System

    SBC: TDA Research, Inc.            Topic: N091035

    Navy aircraft is equipped with an On-Board Oxygen Generation System (OBOGS) to supply the pilot and the crew with supplemental oxygen for high altitude operation. However, Navy aircraft are usually closely spaced while waiting for take-off from aircraft carriers, and the jet engine exhaust contaminates the bleed air used to supply oxygen to the pilot and crew. Among the contaminants in the engine ...

    SBIR Phase I 2009 Department of DefenseNavy
  3. A Compact Full Motion Video and Hyperspectral Measurement System for Small Unmanned Aircraft Systems

    SBC: SPORIAN MICROSYSTEMS INC            Topic: AF171130

    Small Unmanned Aircraft Systems (SUAS) platforms fit into the USAF Intelligence, Surveillance, and Reconnaissance strategy by providing local persistence, operation in contested environments, and low probability of detection. SUAS gimbal performance is ty

    SBIR Phase I 2017 Department of DefenseAir Force
  4. A COMPACT HEAT EXCHANGER/REACTOR FOR ENDOTHERMIC FUELS

    SBC: TDA Research, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of DefenseAir Force
  5. A fast response, open flow, integrating nephelometer for fine scale measurements of aerosol and cloud particles

    SBC: Droplet Measurement Technologies, LLC            Topic: N08190

    The Controlled Towed Vehicle (CTV) has the capability to provide low level, 10 m, detailed information on ocean-atmosphere interactions for several hour periods of time with the tow aircraft maintaining a comfortable and safe flight altitude of 1000-2000 ft. Previous work has detailed turbulence, water vapor and carbon dioxide fluxes from the CTV. In this proposal the capabilities of the CTV will ...

    SBIR Phase II 2009 Department of DefenseNavy
  6. A FEASIBILITY STUDY FOR ESTABLISHING A CERAMIC FERRULE MANUFACTURING FACILITY UTILIZING A PROPRIETARY INJECTION MOLDING SYSTEM

    SBC: Technical Ceramics Laboratorie            Topic: N/A

    A FEASIBILITY STUDY FOR ESTABLISHING A FACILITY FOR MANUFACTRUING CERAMIC FERRULES FOR FIBER OPTIC CONNECTORS. ALL SUCH FERRULES ARE CURRENTLY MANUFACTURED OVERSEAS BY CERAMIC EXTRUSION AND DIAMOND GRINDING, WHICH IS A LABOR INTENSIVE PROCESS. THIS STUDY WILL DETERMINE THE CAPITAL AND PROCESSING REQUIREMENTS FOR ESTABLISHING A FACILITY TOMANUFACTURE CERAMIC FERRULES IN HIGH VOLUMES UTILIZING A UNI ...

    SBIR Phase I 1991 Department of DefenseNavy
  7. A HIGH RELIABILITY OXYGEN/JTX CRYOGENIC REFRIGERATOR

    SBC: Aerospace Design & Development, Inc.            Topic: N/A

    USING TECHNOLOGY NOW IN EXISTENCE AND NOW BEING DEVELOPED IT IS POSSIBLE TO BUILD A HIGH RELIABILITY, CRYOGENIC OXYGEN REFRIGERATOR. THE TEMPERATURE RANGE IN WHICH THE REFRIGERATOR WOULD FUNCTION WOULD BE CONTROLLABLE BETWEEN 70 AND 140 KELVIN. THE BASIS FOR THIS REFRIGERATION CYCLE WOULD BE CERAMIC ELECTROLYTE TECHNOLOGY BY WHICH OXYGEN CAN BE COMPRESSED USING AN ELECTRIC POTENTIAL ACROSS THE CER ...

    SBIR Phase I 1991 Department of DefenseMissile Defense Agency
  8. A Large Aperture Electro-Optic Beamsteerer

    SBC: Vescent Photonics LLC            Topic: AF08T021

    We propose to develop a fully electro-optic beamsteerer for large aperture beams. The beamsteerer will be able to deflect 3-cm beam into a field of regard of 50 deg x 20 deg. In Phase I we will demonstrate and model key technologies needed for a Phase II deliverable. These include a highly birefringent liquid crystals, waveguide couplers, and high-index, high contrast waveguides that will give ...

    STTR Phase I 2009 Department of DefenseAir Force
  9. A Low Cost Production Process for Large High Temperature Polymer Matrix Composites

    SBC: ELTRON RESEARCH & DEVELOPMENT, INCORPORATED            Topic: AF07T013

    Eltron Research & Development Inc. and the Southwest Research Institute® will focus on three primary objectives during Phase II of this Air Force Office of Scientific Research (AFOSR) STTR program, building upon the success realized during Phase I work. First, we will be prepared to transition High Temperature Vacuum Assisted Resin Transfer Molding (HTVARTM) needed in Phase III, by optimizing and ...

    STTR Phase II 2009 Department of DefenseAir Force
  10. A MEMS Pulsed Injection Electrostatic Atomizer for Small Engines

    SBC: TDA Research, Inc.            Topic: A08T012

    The Army needs energy dense, portable power generation and propulsion units. In order to reduce the consumables and simplify logistics, very small engines (defined as a power rating of less than 5 hP) need to be fueled with readily available logistic fue

    STTR Phase II 2009 Department of DefenseArmy
US Flag An Official Website of the United States Government