Award Data

Design, build, test and evaluate an engineering prototype neutron generator for Am-Be replacement that is to scale and function to simulate ruggedness and suitability for borehole applications. In Phase II, Starfire will develop the most difficult tool for design and evaluation, the 1-11/16” bore tool for 2” cased oil/gas wells, which has the greatest market application. The unit output will ...

In the event of a terrorist attack, the ability to measure the extent and location of the attack and rapidly notify first responders will be critical to saving lives. If the widespread use of cell phones could be harnessed with an ability to detect chemical threats and immediately notify authorities of the scope and location of the attack, public safety would be significantly enhanced. Synkera pro ...

SIGNIFICANT CONSERVATISM IN MODERN SEISMIC PRA DERIVES FROM SIMPLIFICATIONS IN GROUND-MOTION CHARACTERIZATION AT THE INTERFACE OF SEISMIC HAZARD AND FRAGILITY METHODOLOGIES. THIS CONSERVATISM ARISES BECAUSE A SINGLE COMPOSITE-MAGNITUDE, BROAD-BAND, GROUND-MOTION SPECTRUM IS USED TO DERIVE FRAGILITY FUNCTIONS, WHEREAS THE MAJORITY OF MOTIONS CONTRIBUTING TO SITE HAZARD HAVE (LESS-DAMAGING) NARROW-B ...

Toxic Industrial Chemicals (TICs) are chemical substances that produce toxic effects if given in sufficient quantities and/or exposed for long durations. TICs are a great concern for the U.S. Department of Homeland Security (DHS) since it would be easier for terrorists to obtain and use than CAs. There are many commercially available handheld and personal gas monitors to monitor TICs. However, the ...

Marietta X-Ray, Inc (MXRI) and its subcontractor Rapiscan Laboratories, Inc. propose to develop a mobile non-intrusive prototype that can demonstrate the capability of inspecting a complete general-aviation aircraft for concealed contraband. Our solution utilizes an existing vehicle and manipulator coupled with an x-ray inspection system. The x-ray system is based on backscatter technology, which ...

This proposal covers the development of audio processing technology that enables improved communications capability among first responders. The goal is to improve the SNR of the audio signal that is input to the radio or other communication system when the user is in a noisy environment. The technologies to be investigated include the use of multiple microphones for acoustic beam-steering, new tec ...

N/A

N/A