You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. All Dry Processing of Amorphous Silicon Photoresists

    SBC: MATERIALS RESEARCH GROUP, INC.            Topic: N/A

    An inorganic photoresist system involving only dry processing has many potential uses in microelectronic fabrication. Reduced wafer contamination and simpler waste disposal requirements will provide a strong driving force for replacing existing wet photolithographic processes with the new system. At the completion of this project, a new inorganic resist system utilizing hydrogenated amorphous si ...

    SBIR Phase II 1996 Department of DefenseArmy
  2. Feature Based Classification of Interferometric SAR Data for Rapid Mapping

    SBC: VEXCEL CORP.            Topic: N/A

    A testbed is proposed for the rapid prototyping of algorithms to extract information from three-dimensional (3D) synthetic aperture radar (SAR) data including the high resolution digital terrain elevation data (DTED), the backscatter image and the phase correlation image. The testbed will operate on a Silicon Graphics workstation with a stereo display and Geographical Information System (GIS) sof ...

    SBIR Phase II 1996 Department of DefenseArmy
  3. Autonomous Lidar Wind Field Sensor

    SBC: COHERENT TECHNOLOGIES, INC.            Topic: N/A

    Previous measurements using two micron solid-state lidar systems and computer simulation of lidar performance demonstrate that an eyesafe, low-pulse-energy (1 - 10 mJ/pulse), small aperture (~10cm) lidar will be capable of highly accurate high spatial resolution wind velocity measurements to ranges of 2-10 km in the atmospheric boundary layer. High-spatial resolution 3-D coverage for several km a ...

    SBIR Phase II 1996 Department of DefenseArmy
  4. A Rapid, Inexpensive Immunosensor for the Detection of Validated Biological Warfare Agents

    SBC: Ddx, Inc.            Topic: N/A

    The OpTest system has been conceived of and demonstrated in response to pressing diagnostic needs. It is an immunosensor device to enable detection of BW agent specific antigens or extracellular products and toxins, using "capture" and "detection" antibodies, at picogram or sub-picogram levels, from biological fluids. OpTest also is capable of detecting BW agent specific nucleic acids which are ...

    SBIR Phase II 1996 Department of DefenseArmy
  5. FEASIBILITY STUDY FOR INTEGRATED ANTENNA-AMPLIFIER NETWORK

    SBC: Green Mountain Radio Research Company            Topic: N/A

    OPERATION OF A JAMMER TRANSMITTER FROM A SMALL PLATFORM (RPV OR JEEP) NECESSITATES THE USE OF ELECTRICALLY SHORT ANTENNAS SUCH AS SHORT WHIPS AND SMALL LOOPS. THE CONVENTIONAL APPROACH USES A POWER AMPLIFIER DESIGNED FOR A 50-OHM LOAD AND AN ANTENNA TUNER THAT MATCHES THE ANTENNA-INPUT IMPEDANCE TO OHMS. HOWEVER, THE RAPID FREQUENCY CHANGES REQUIRED BY JAMMERS PRECLUDE THE USE OF ANTENNA TUNING. T ...

    SBIR Phase II 1991 Department of DefenseArmy
  6. AN ENVIRONMENT FOR SIMULATION MODELING OF DISTRIBUTED SYSTEMS

    SBC: INNOVATIVE RESEARCH, INC.            Topic: N/A

    THE DEVELOPMENT OF SIMULATION MODELS OF A DISTRIBUTED SYSTEMS AND THEIR MAPPING INTO A PARALLEL SYSTEM, IS A HIGHLY COMPLEX TECHNICAL TASK BECAUSE OF THE GREAT INFLUENCE ITS VARIOUS ELEMENTS WILL HAVE ON ITS PERFORMANCE. THERE ARE MAJOR TECHNICAL ISSUES INVOLVED IN PERFORMING SUCH COMPLEX SIMULATION EFFORT, INCLUDING UNIQUE REQUIREMENTS SIMULATION MODELS, VARIED ARCHITECTURAL CONCEPTS OF DISTRIBUT ...

    SBIR Phase II 1991 Department of DefenseArmy
  7. CREATION OF AS-BUILT DRAWINGS IN CAD SYSTEMS

    SBC: Antech Inc.            Topic: N/A

    N/A

    SBIR Phase II 1991 Department of DefenseArmy
  8. Development of Dendrimer-Based Protective Coatings

    SBC: TDA RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseArmy
  9. Conformal Antenna for Soldier C4I

    SBC: WANG ELECTRO-OPTO CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseArmy
  10. Surge Margin Enhancement for a Centrifugal Compressor

    SBC: Concepts NREC, LLC            Topic: N/A

    Turboshaft engines are subject to various transient modes, necessitating a compressor with very high surge margin. Therefore, many devices were proposed in the past, and some of them including a recent one with a vaneless cavity by Allied Signal Engines, demonstrated impressive surge margin enhancement. However, there ahs been no detailed investigations on understanding the flow mechanism leading ...

    SBIR Phase I 1996 Department of DefenseArmy
US Flag An Official Website of the United States Government