Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. 20 year backup battery

    SBC: Johnson Research & Development Co Inc            Topic: A09022

    The maintenance of hardware by the use of battery back-up systems or monitoring sensors is vital for critical systems. The failure of a battery due to aging or environment is the equivalent of having no back-up. Current primary batteries used for such tasks have an anticipated life far less than the equipment they are installed in. Periodic replacement of batteries in these critical systems is exp ...

    SBIR Phase II 2011 Department of DefenseArmy
  2. 370W Very Small Heavy Fuel Engine

    SBC: JM HARWOOD, LLC            Topic: A11068

    JM Harwood, LLC, proposes the development of a 370W (0.5 hp) small heavy fuel engine. The 6 cubic centimeter (cc) compression ignition, direct fuel injected, 2-stroke will leverage on-going work on a very small heavy fuel (VSHF) combustion test bed funded by the Army Research Laboratory (ARL). The proposed effort will also leverage on-going development efforts on the Very Small Injection Technol ...

    SBIR Phase I 2011 Department of DefenseArmy
  3. A Neck Injury Assessment Tool

    SBC: CFD Research Corporation            Topic: DHP13009

    The overall objective of the proposed project is to develop new injury criteria, model based risk assessment methodology, and a software tool to assess neck injury risk from head supported mass (HSM) loading. Based on the foundation of Phase I feasibility studies, the proposed Phase II work will focus on model enhancement, extension and validation, risk assessment, and software integration and tes ...

    SBIR Phase II 2015 Department of DefenseDefense Health Program
  4. A Novel Attachment Method for Legacy and Future DoD Vehicles

    SBC: Creative Engineering Solutions Inc.            Topic: A11061

    CES in cooperation with QinetiQ-NA successfully demonstrated a rapid deployment 18 thick, 24 wide x 24 tall, 400 pound applique support system that easily surpassed its Phase 1 performance requirement of 3-5 G by as much as 300%; an unprecedented 10 G (4140 pounds) of sustained static loading. CES, working with QinetiQ-NA proposes to advance and refine the technology and design during Phase II ...

    SBIR Phase II 2013 Department of DefenseArmy
  5. A Photonic Soldier Identification System

    SBC: DYNETICS, INC.            Topic: N/A

    Dynetics, teamed with Harris Corporation, proposes to integrate our innovative optical receiver technology with existing components to produce a novel Soldier Identification System. Our unique approach couples a specially designed, hand-held interrogation unit and a small, passive responder located on the soldier. In operation, the interrogator transmits a 1024-bit coded sequence to the soldier vi ...

    SBIR Phase II 1995 Department of DefenseArmy
  6. A Priori Error-Controlled Simulations of Electromagnetic Phenomena for HPC

    SBC: COMPUTATIONAL SCIENCES LLC            Topic: A11aT015

    The project will remove a key difficulty that currently hampers many existing methods for computing unsteady electromagnetic waves in unbounded regions. The accuracy and/or stability of the simulations may deteriorate over long times due to the treatment of the outer boundaries via artificial boundary conditions. We propose to develop a universal algorithm and software that will correct this probl ...

    STTR Phase I 2011 Department of DefenseArmy
  7. A Programmable Microwave Fiber-Optic Delay Line Network (Q-DOT Research Proposal 39-1422)

    SBC: Q-DOT, INC.            Topic: N/A

    Q-DOT proposes an innovative wideband microwave programmable delay line network. The proposed approach offers an unprecedented combination of bandwidth, 16 GHz, resolution, delays to 655.34 Us in steps of 20 ns, delay stability, 1 ns over temperature, and amplitude stability, +-1.5 dB. Most of the components are off-the-shelf, with only one custom component to be developed, a micromachined, opti ...

    SBIR Phase I 1995 Department of DefenseArmy
  8. A rapid and high-throughput microfluidic stem cell analyzer

    SBC: CFD Research Corporation            Topic: OSD11H14

    Current methods to discern the differentiation state of stem cells are time-consuming, labor-intensive, costly, invasive, and consequently, ill-suited for clinical applications. To overcome these limitations, we propose to develop a microfluidic stem cell analyzer for accurate, non-invasive identification of the cell differentiation state in conjunction with automated cell sorting at high-throughp ...

    SBIR Phase II 2013 Department of DefenseDefense Health Program
  9. A rapid and high-throughput microfluidic stem cell analyzer

    SBC: CFD Research Corporation            Topic: OSD11H14

    Current methods for stem cell isolation are time-consuming, costly, and labor-intensive, and ill-suited for point of care applications. To overcome these limitations, we propose to develop and demonstrate a high-throughput, non-invasive, microfluidic stem cell analyzer to enable a rapid isolation of high-quality stem cell products from clinically relevant samples. Our technology enables significan ...

    SBIR Phase II 2015 Department of DefenseDefense Health Program
  10. A Rapid, Inexpensive Immunosensor for the Detection of Validated Biological Warfare Agents

    SBC: Ddx, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseArmy
US Flag An Official Website of the United States Government