You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Density, Multi-Layered Nosetips for Hypersonic Projectiles

    SBC: Plasma Processes, LLC            Topic: N131071

    The Navy is developing weapon systems capable of launching inert projectiles for long-range surface fire support and missile intercept applications. Inert projectiles offer significant logistical and safety advantages over conventional chemical propellants or explosive ordnances. The launch conditions of future hypersonic projectiles will put extreme mechanical and aerothermal loads on the project ...

    SBIR Phase II 2015 Department of DefenseNavy
  2. Low Magnetic Signature Expendable Unmanned Aerial Vehicle (UAV) for Anti-Submarine Warfare (ASW)

    SBC: Area I, Inc.            Topic: N141014

    The team proposes to leverage their expertise to develop an anti-submarine warfare (ASW) variant of Area-Is Air-Launched, Tube-Integrated Unmanned System (ALTIUS). ALTIUS, meaning higher in Latin, represents a paradigm shift in the performance of small, tube-launched unmanned aircraft. Core features and capabilities of the ALTIUS-ASW will include: A highly efficient, lightweight, composite airfram ...

    SBIR Phase II 2015 Department of DefenseNavy
  3. Absorption and/or Scattering of Light by Small Particles

    SBC: Capco Inc.            Topic: N132100

    The objectives of the Phase II effort are to demonstrate the safety of the developed obscurant device for use in US Navy aircraft as an airborne expendable countermeasure, to optimize performance and to make the obscurant device fully compatible with existing Navy countermeasure dispensing systems.

    SBIR Phase II 2015 Department of DefenseNavy
  4. Thermal/Mechanical Aqueous Chlorate Solution Oxygen Generator

    SBC: API Engineering LLC            Topic: N101081

    This is a Subsequent Phase II Proposal, extension of Phase II contract N00014-11-C-0400. The proposed research deals with production of oxygen for use by air independent solid oxide fuel cells (SOFC) in unmanned undersea vehicles (UUVs). Oxygen is produced via thermal decomposition of an aqueous lithium chlorate solution using waste heat from the SOFC. Efforts include demonstration of oxygen produ ...

    SBIR Phase II 2015 Department of DefenseNavy
  5. A rapid and high-throughput microfluidic stem cell analyzer

    SBC: CFD RESEARCH CORPORATION            Topic: OSD11H14

    Current methods for stem cell isolation are time-consuming, costly, and labor-intensive, and ill-suited for point of care applications. To overcome these limitations, we propose to develop and demonstrate a high-throughput, non-invasive, microfluidic stem cell analyzer to enable a rapid isolation of high-quality stem cell products from clinically relevant samples. Our technology enables significan ...

    SBIR Phase II 2015 Department of DefenseDefense Health Agency
  6. Multi-Stage, Multi-Phase, High Efficiency, Intelligent, Electrical Energy Conversion Unit for Navy and USMC

    SBC: GLOBAL TECHNOLOGY CONNECTION, INC.            Topic: N141073

    The Navy and USMC desire innovative technology solutions to upgrade its electrical energy conversion capabilities in order to reduce volume, weight, and cost for efficiently executing land- and sea-based operations. Global Technology Connection, Inc. (GTC) in collaboration with its university and industrial partners, established the feasibility of developing a high power density, high efficiency u ...

    SBIR Phase II 2015 Department of DefenseNavy
  7. Shoulder injury risk and exertion assessment tool

    SBC: CFD RESEARCH CORPORATION            Topic: DHP13008

    Musculoskeletal injury among military personnel is an under-recognized problem where shoulder injuries are significant and result in inflammation and pain from overuse, joint derangement, sprain/stain/rupture, and dislocation. Health hazard assessment is essential to ensure that fielded equipment and occupational duties do not exceed human capabilities over short and long term exposures. Hazard ...

    SBIR Phase II 2015 Department of DefenseDefense Health Agency
  8. A Neck Injury Assessment Tool

    SBC: CFD RESEARCH CORPORATION            Topic: DHP13009

    The overall objective of the proposed project is to develop new injury criteria, model based risk assessment methodology, and a software tool to assess neck injury risk from head supported mass (HSM) loading. Based on the foundation of Phase I feasibility studies, the proposed Phase II work will focus on model enhancement, extension and validation, risk assessment, and software integration and tes ...

    SBIR Phase II 2015 Department of DefenseDefense Health Agency
  9. Physics and Physiology Based Human Body Model of Blast Injury and Protection

    SBC: CFD RESEARCH CORPORATION            Topic: DHP13010

    The vast majority of injuries in recent military conflicts have been inflicted by improvised explosive devices (IEDs) causing brain, extremities and genital-urinary injuries. Advanced computational models of IED blast physics and human body injury biomech

    SBIR Phase II 2015 Department of DefenseDefense Health Agency
  10. Compact robust testbed for cold-atom clock and sensor applications

    SBC: COLDQUANTA, INC.            Topic: N13AT018

    Our goal in this Phase II effort is to construct and test a compact, robust testbed for generating laser-cooled strontium atoms on a mobile platform. The focus of the Phase I effort was designing and fabricating an ovenized strontium source that also serves as a 2D+ MOT cell. In Phase II, we will integrate the strontium source into an all-glass-and-silicon vacuum system maintained by a miniature i ...

    STTR Phase II 2015 Department of DefenseNavy
US Flag An Official Website of the United States Government