You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Chronological Sweat Sensor Patch for Real-Time Human Molecular Biomarker Monitoring

    SBC: TDA RESEARCH, INC.            Topic: DHA18003

    Sweat contains biomarkers that give an indication of human cognitive levels. In this SBIR project TDA Research is developing a modular sweat sensor patch that has the capability to not only carry out real-time monitoring of select biomarkers, but also to

    SBIR Phase II 2019 Department of DefenseDefense Health Agency
  2. Lightweight, Compact System for Generating Lactated Ringer's Solution

    SBC: TDA RESEARCH, INC.            Topic: DHA172011

    Currently, deployed medics are required to transport, maintain and be resupplied with liquid-based medications and materials that are heavy, expensive to transport, perishable and may require refrigeration. Many medications and materials are or will soon

    SBIR Phase II 2019 Department of DefenseDefense Health Agency
  3. Development of a Profiling Microwave Radiometer for Offshore Wind Farms, Further Characterization of Marine Atmospheric Boundary Layer

    SBC: BOULDER ENVIRONMENTAL SCIENCES AND TECHNOLOGY, LLC            Topic: 16a

    The life expectancy of offshore wind turbines is at least 20 years, during which they must operate optimally with respect to power production, minimization of mechanical stresses, plant wake distribution, and more, in a range of atmospheric conditions.These conditions are currently observed using meteorological masts, which provide inadequate observations, thus resulting in suboptimal turbine desi ...

    SBIR Phase II 2019 Department of Energy
  4. Stable, Low-Loss Joints for HTS Fusion Magnets

    SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC            Topic: 22c

    The feasibility of fusion as a practical energy source needs to be improved significantly by removing some of the restrictions that low-temperature superconductors put on the fusion magnet systems.One method to simplify the magnet system is by using high-temperature superconductors (HTS) that allow for a higher magnet performance and much larger temperature margins.Successful application of HTS in ...

    SBIR Phase II 2019 Department of Energy
  5. High Temperature Operable, Harsh Environment Tolerant Flow Sensors for Nuclear Reactor Applications

    SBC: SPORIAN MICROSYSTEMS, INC            Topic: 32k

    A commonly noted sensor need for nuclear power systems is flow sensing in the various heat transfer mediums and to monitor medium velocities and characterize mixing and/or cooling.This is particularly needed for small modular reactors (SMR) and molten salt reactors (MSR).Such sensors must be able to tolerate high temperatures, high pressures, highly corrosive liquids, and radiation (neutron and ga ...

    SBIR Phase II 2019 Department of Energy
  6. Front End for Advanced Laser Driver for ICF Driver

    SBC: Aqwest, LLC            Topic: 22a

    Aqwest LLC proposes to further develop a "Front End" laser for an advanced inertial fusion energy (IFE) laser driver, integrate it with final amplifier (FA) modules developed by Aqwest for the Department of Energy (DOE), and conduct a parametric test evaluation.The development and commercialization of IFE is impeded by the lack of efficient and economical laser driver.IFE offers to tap almost unli ...

    SBIR Phase II 2019 Department of Energy
  7. Design and Simulation of Capillary Discharge Plasmas for Next Generation Plasma Wakefield Accelerators

    SBC: RADIASOFT LLC            Topic: 23b

    Fundamental improvements to the energy, brightness, and stability of lepton beams from next generation plasma-based accelerators are essential to maintain rapid innovation and scientific productivity within the field of advanced accelerators.Meeting these goals requires improvements in the design and control of the plasmas used for injection and acceleration.Laser plasma accelerators benefit from ...

    SBIR Phase II 2019 Department of Energy
  8. A New Sorbent Process for Transformational Carbon Capture Process

    SBC: TDA RESEARCH, INC.            Topic: 18d

    The electricity produced from fossil fuels is essential to the world’s prosperity and security, but the increasing atmospheric CO2 concentrations caused by the fossil fuel combustion are implicated in global warming.Although there are several methods for separating CO2 from the flue gases, all have significant drawbacks, including loss of efficiency and increased capital and operating costs that ...

    SBIR Phase II 2019 Department of Energy
  9. Highly Efficient Smart Tanks for Hydrogen Storage

    SBC: TDA RESEARCH, INC.            Topic: 10a

    The commercial success of the Fuel Cell Electric Vehicles will require significant reductions in the cost of hydrogen fueling.Current fueling stations require pre-cooling equipment that chills the hydrogen to -40°C; this is needed to offset the temperature rise caused by compression during fueling and keep the polymer liner of the vehicle’s tank below its maximum operating temperature of 85?C.I ...

    SBIR Phase II 2019 Department of Energy
  10. A Corrosion Test Station for Improved Characterization and Examination Capabilities of Advanced Nuclear Reactor Fuels and Materials

    SBC: Niowave, Inc.            Topic: 30i

    Liquid-metal coolants are one of the most promising solutions for the challenges of advanced high temperature nuclear reactor systems.They optimize heat transfer, neutronics, safety, and compactness of the reactor systems.Molten lead and lead-bismuth eutectic (LBE) are the primary coolant candidates due to their unique thermo-mechanical and neutronics properties.However, they are highly corrosive ...

    STTR Phase II 2019 Department of Energy
US Flag An Official Website of the United States Government