Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. "Transportation Planning Decision Support Systems"

    SBC: In Motion            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Transportation
  2. 1. Drug-Eluting Bioresorbable Polymer Scaffolding for Treatment of Aortic Aneurys

    SBC: MEDSHAPE, INC.            Topic: NHLBI

    DESCRIPTION (provided by applicant): This proposal is focused on the development of a bioabsorbable polymeric scaffold intended to provide both time-release delivery of therapeutic agents as well as structural support in the treatment of aortic aneurysms.An abdominal aortic aneurysm (AAA) is a condition in which the aorta, the main blood vessel in the abdomen, expands like a balloon. The aneurysm ...

    SBIR Phase II 2011 Department of Health and Human Services
  3. 20 year backup battery

    SBC: Johnson Research & Development Co Inc            Topic: A09022

    The maintenance of hardware by the use of battery back-up systems or monitoring sensors is vital for critical systems. The failure of a battery due to aging or environment is the equivalent of having no back-up. Current primary batteries used for such tasks have an anticipated life far less than the equipment they are installed in. Periodic replacement of batteries in these critical systems is exp ...

    SBIR Phase II 2011 Department of DefenseArmy
  4. A Biomimetic Prehensile Digit for Upper-Limb Prostheses

    SBC: Invisible Hand Enterprises, LLC            Topic: NICHD

    DESCRIPTION (provided by applicant): Among amputation types involving the upper limbs, partial hand is the most prevalent by far and among the most challenging for prosthetists to address well. Sound side overreliance for these amputees gives rise to a high prevalence of contralateral overuse syndrome (COS), a progressive, painful, and debilitating condition. Research shows that prostheses reduce ...

    SBIR Phase I 2011 Department of Health and Human Services
  5. A Compact CO Oxidation System

    SBC: TDA Research, Inc.            Topic: N091035

    Navy aircraft are equipped with an On-Board Oxygen Generation System (OBOGS) to supply the pilot and the crew with supplemental oxygen for high altitude operation. However, Navy aircraft are usually closely spaced while waiting for take-off from aircraft carriers, and the jet engine exhaust contaminates the bleed air used to supply oxygen to the pilot and crew. Among the contaminants in the engine ...

    SBIR Phase II 2011 Department of DefenseNavy
  6. A Compact Integrated System for Air Capture of Atmospheric CO2

    SBC: ELTRON RESEARCH & DEVELOPMENT, INCORPORATED            Topic: 22d

    Although means currently exist to capture CO2 from combustion and other sources, capture at atmospheric levels is difficult. Once captured, CO2 needs to be released in concentrated form and sequestered: e.g., it can be buried under ocean water or in underground vaults, or it can be reacted with basic metal oxides to form metal carbonates. It may also be reduced to methane (another greenhouse gas), ...

    SBIR Phase II 2011 Department of Energy
  7. A Compact, Portable Oxygen Generator

    SBC: TDA Research, Inc.            Topic: NHLBI

    DESCRIPTION (provided by applicant): In this Phase I SBIR project, TDA Research, Inc. will develop a compact, lightweight portable oxygen concentrator (POC) for medical operations and carry out a breadboard demonstration to produce continuous flow of enriched oxygen (O2) from ambient air. The new POC will weigh less than 10 lbs including the rechargeable batteries that will provide a minimum of 10 ...

    SBIR Phase I 2011 Department of Health and Human Services
  8. A Conformal Packaging and Installation Technique for In Situ Sensors in Extreme Environments

    SBC: SPORIAN MICROSYSTEMS INC            Topic: N112123

    Sporian Microsystems Inc. has spent the last several years developing polymer derived SiCN sensor and associated packaging technology for application temperatures up to 1350degreesC, and demonstrated them in the combustion environments of a range of commercial burner rigs and aerospace turbine engines. Based on our expertise in high temperature materials and packaging processes, we propose to deve ...

    SBIR Phase I 2011 Department of DefenseNavy
  9. A Conformal Packaging and Installation Technique for In Situ Sensors in Extreme Environments

    SBC: SPORIAN MICROSYSTEMS INC            Topic: N112123

    Sporian Microsystems Inc. has spent the last several years developing polymer derived SiCN sensor and associated packaging technology for application temperatures up to 1350 & #176;C, and demonstrated them in the combustion environments of a range of commercial burner rigs and aerospace turbine engines. Based on our expertise in high-temperature materials and packaging processes, we propose to dev ...

    SBIR Phase II 2013 Department of DefenseNavy
  10. A CONTINUOUSLY TUNABLE 2-5 MICRON LASER USING INTRACAVITY SHIFTING IN A DIODE LASER PUMPED Cr:LiSAF OSCILLATOR

    SBC: OPHIR CORPORATION            Topic: N/A

    A continuously tunable laser source covering the 2-5 micron wavelength region is proposed. Light generated by a diode laser pumped tunable Cr:LiSAF laser is Raman shifted twice in Hydrogen to nicely cover the 205 micron window. The unique feature of the proposed laser is that the Raman shifting cell and optics are placed inside the pump laser cavity. As a result sufficient gain and interaction len ...

    SBIR Phase II 1995 Department of DefenseAir Force
US Flag An Official Website of the United States Government