You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. The Application of LIBS to the Detection of Lead in Soil and Paint

    SBC: ADA TECHNOLOGIES, INC.            Topic: N/A

    This proposal describes the development of an instrument based on laser-induced breakdown spectroscopy (LIBS) for the detection of lead in paint and soil that will have both military and commercial applications. The Phase I instrument will be similar to multi-species, portable LIBS instruments built by Dr. David Cremers at Los Alamos National Laboratory that utilize a spectrograph/charge coupled ...

    SBIR Phase I 1996 Department of DefenseArmy
  2. Continuous Analyzer for Monitoring HC1/C12 During Site Cleanup Activity

    SBC: ADA TECHNOLOGIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Energy
  3. CLEANUP OF DENTAL AMALGAM WASTE TO MEET SEWER REGULATION

    SBC: ADA TECHNOLOGIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Health and Human Services
  4. SBIR Phase I: Improved Accuracy for Student/Scientist Networks

    SBC: ADA TECHNOLOGIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 National Science Foundation
  5. Arsine Abatement

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The continued use of arsine gas and/or its derivatives is vital to the manufacture of a wide variety of semiconductor devices. While the use of arsine is growing, it poses serious environmental and safety problems in the industry. New methods must be found that permit the facile trapping and detoxification of arsine and its derivatives. Advanced Technology Materials, Inc. (ATM) has gained a reputa ...

    SBIR Phase II 1996 Department of DefenseAir Force
  6. High Performance Thin Film Microactuator Materials

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The potential applications of microelectromechanical systems (MEMS) have only begun to be recognized. This technology demands thin film materials with exceptional microstructural quality for high performance and processes with high yields. For piezoelectric microactuator applications, thin film lead zirconate titanate (PZT) is the leading material choice. Furthermore, substitutional modificatio ...

    SBIR Phase II 1996 Department of DefenseAir Force
  7. Stress Analyzer for Microelectronic Devices

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Multilayer thin films deposited onto Si wafers often exhibit high residual stresses during processing, leading to structural failure and/or electrical breakdown. Traditional scanning x-ray diffraction provides an accurate measurement of complex stress behavior in multilayer structures, but is difficult to carry out on a routine basis. Laser deflection methods are easy to perform but provide a li ...

    SBIR Phase II 1996 Department of DefenseAir Force
  8. COMPACT LOW-NOISE DIAMOND DYNODES

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    THE UNIQUE PROPERTIES OF SEMICONDUCTING DIAMOND MAY BE EXPLOITED TO CREATE NOVEL, COMPACT, LOW-NOISE PHOTON AND PARTICLE DETECTORS. PHOTOMULTIPLIER TUBES ARE THE DETECTOR OF CHOICE WHEN LIGHT LEVELS ARE LOW OR WHEN THE PROPER SIGNAL MUST BE EXTRACTED FROM A CLUTTERED BACKGROUND. CONTINUOUS DYNODES, KNOWN AS CHANNEL ELECTRON MULTIPLIERS, ARE WIDELY USED AS PARTICLE DETECTORS. INNOVATIVE CHANGES ...

    SBIR Phase II 1996 National Science Foundation
  9. SiC accelerometers for harsh environments

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Sensors and control electronics based on SiC offer an opportunity to realize systems with operating temperatures approaching 500 degrees C. The unique high temperature properties and chemical robustness of SiC make it an ideal choice for applications where generic components and sensors need to function under widely varying environmental conditions The wide range of environments in which military ...

    SBIR Phase II 1996 Department of DefenseArmy
  10. Lattice Matched III-V Nitride Heterostructures

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The III-V nitrides have recently emerged as the primary material system for UV/blue light emitters. Higher bandgap energy (Al,Ga)N alloys are currently employed as cladding layers for GaN and (In,Ga)N active region LEDs and laser structures. Lattice mismatch between the cladding and active regions, however, restricts both the thickness and composition of the layers which in turn limits the operati ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government