You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. DEVELOPMENT OF A RELIABLE REAL-TIME FREON DETECTOR

    SBC: ADA Technologies, Inc.            Topic: N/A

    IN ORDER TO PREVENT INJURY OR DEATH RESULTING FROM OXYGEN DEPRIVATION CAUSED BY THE RELEASE OF HIGH CONCENTRATIONS OF FREON GASES IN INDOOR ENVIRONMENTS, A SIMPLE, COMPACT, RELIABLE FREON MONITORING DEVICE IS PROPOSED. THE ELECTRON-CAPTURE DETECTOR WILL BE USED AS THE FREONSENSING ELEMENT IN THE MONITOR BECAUSE OF ITS PROVEN SENSITIVITY AND SELECTIVITY TO FREONS. THE PROPOSED INSTRUMENT, WHICH OPE ...

    SBIR Phase I 1988 Department of DefenseNavy
  2. THE DEVELOPMENT OF AN AMMONIA DETECTOR FOR PROCESS CONTROL OF ADVANCED NITROGEN OXIDE REMOVAL TECHNOLOGIES FOR COAL-FIRED GAS STREAMS

    SBC: ADA Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of Energy
  3. DEVELOPMENT OF A LOW COST ETHYLENE OXIDE DETECTOR

    SBC: ADA Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of Health and Human Services
  4. DEVELOPMENT OF A LOW-COST ETHYLENE OXIDE DETECTOR

    SBC: ADA Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of Health and Human Services
  5. ELECTRONIC EQUIPMENT SHELTERS

    SBC: Advanced Composite Technology            Topic: N/A

    THIS PROJECT WILL RESEARCH MATERIALS AND DEVELOP A DESIGN AND CONCEPT FOR MAKING ELECTRONIC EQUIPMENT SHELTERS USING ADVANCED MATERIALS. THE ADVANCED MATERIAL SHELTER WILL BE DESIGNED TO TAKE ADVANTAGE OF A NUMBER OF SIGNIFICANT ADVANCES IN MATERIALS AND PROPRIETARY TECHNOLOGICAL ADVANCES IN MANUFACTURING DEVELOPED BY ADVANCED COMPOSITE TECHNOLOGY, INC. (ACT). ACT HAS DEVELOPED TWO TECHNOLOGIES SI ...

    SBIR Phase II 1988 Department of DefenseAir Force
  6. SMALL CRATER BRIDGING MATERIAL

    SBC: Advanced Composite Technology            Topic: N/A

    THIS PROJECT WILL RESEARCH MATERIALS AND DEVELOP A DESIGN AND CONCEPT FOR MAKING A ULTRA-STRONG, LIGHT WEIGHT SMALL CRATER REPAIR SYSTEM USING ULTRA-LIGHT, ULTRA-STRONG ADVANCED MATERIALS. THE END PRODUCT FOR PHASE I WILL BE A DETAILED DESIGN AND ANALYSIS FOR THE SYSTEM. THE ADVANCED MATERIAL SYSTEM WILL BE DESIGNED TO TAKE ADVANTAGE OF A NUMBER OF SIGNIFICANT ADVANCES IN MATERIALS AND PROPRIETARY ...

    SBIR Phase I 1988 Department of DefenseAir Force
  7. ELECTROTHERMAL REFORMING OF HAZARDOUS ORGANICS AND WATER- SOLUBLE WASTES

    SBC: A1-chem Fuels Inc.            Topic: N/A

    A1-CHEM FUELS, INC. HAS A PATENT PENDING FOR AN ELECTROTHER-MAL DEVICE TO PRODUCE MEDIUM TO HIGH BTU FUEL GAS FROM WASTEHYDROCARBON SOURCES. THIS UNIT OPERATES BY PRODUCING A HIGH-VOLTAGE ALTERNATING CURRENT ELECTRIC DISCHARGE ACROSS THE INTERFACE BETWEEN A WASTE HYDROCARBON AND WATER. THE EXTREMELY HIGH TEMPERATURE WITHIN THE ELECTRICAL DISCHARGE IS SUFFICIENT TO CAUSE LOCALIZED FAST PYROLYSIS OF ...

    SBIR Phase II 1988 Environmental Protection Agency
  8. INTEGRATED RELIABILITY AND TIMING DESIGN ANALYSIS TOOL

    SBC: Advanced Systems & Technologies Inc            Topic: N/A

    DURING DEVELOPMENT OF COMPLEX, EMBEDDED SYSTEMS QUANTITATIVE TRADEOFFS OF RELIABILITY AND TIMING PERFORMANCE ARE OFTEN NOT CONSIDERED. DEGRADED PERFORMANCE IN ONE OR BOTH OF THESE AREAS CAN RESULT. AN INTEGRATED RELIABILITY AND TIMING ANALYSIS TOOL WILL PROVIDE THE CAPABILITY FOR SIMULTANEOUSLY ASSESSING SYSTEM DESIGNS FOR BOTH CHARACTERISTICS. BY BASING THE TOOL ON AN ICONIC DESIGN REPRESENTATION ...

    SBIR Phase II 1988 Department of DefenseNavy
  9. A HARDWARE SCALABLE MICROPROCESSOR-BASED TESTBED FOR SYSTEM-LEVEL SIMULATION

    SBC: Advanced Systems & Technologies Inc            Topic: N/A

    THIS IS A PROPOSAL TO DESIGN AND IMPLEMENT AN EFFICIENT AND ECONOMICAL MICROPROCESSOR-BASED TESTBED FOR SYSTEM-LEVEL SIMULATION WHICH IS EASILY SCALABLE IN HARDWARE RESOURCES AND WHICH HAS A POWERFUL DEVELOPMENT ENVIRONMENT. THE PERFORMANCE TARGET OF THE TESTBED IS A TIME COMPRESSION TEN TIME GREATER THAN THAT FROM ONE OF THE CONSTITUENT PROCESSORS. THE SIMULATION TESTBED WILL BE DESIGNED TO EXECU ...

    SBIR Phase I 1988 Department of DefenseNavy
  10. A RECUPERATOR FOR CRYOCOOLERS

    SBC: Almatech            Topic: N/A

    THIS PROJECT INVOLVES DEVELOPMENT AND VERIFICATION OF THE PERFORMANCE OF A NOVEL HEAT EXCHANGER OPERATING IN THE 98 TO 99 PERCENT THERMAL EFFECTIVENESS RANGE. HEAT EXCHANGERS FOR CRYOCOOLER APPLICATIONS USED IN HIGH ENERGY PHYSICS, REMOTE SENSING, ETC., FREQUENTLY REQUIRE THERMAL EFFECTIVENESS OF OVER 98%. THIS IS DIFFICULT TO ACCOMPLISH,PRIMARILY BECAUSE OF THE EFFECT OF THE LONGITUDINAL THERMAL ...

    SBIR Phase I 1988 Department of Energy
US Flag An Official Website of the United States Government