You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
SENSOR BASED SERVO CONTROL FOR A MOBILE ROBOT MANIPULATOR
SBC: Advanced Technologies/Laboratories Intl Topic: N/AN/A
SBIR Phase I 1991 Department of DefenseArmy -
MODULAR SOLDIER'S COMPUTER (MSC)
SBC: Agilis Corp. Topic: N/AN/A
SBIR Phase I 1991 Department of DefenseArmy -
CREATION OF AS-BUILT DRAWINGS IN CAD SYSTEMS
SBC: Antech Inc. Topic: N/AN/A
SBIR Phase II 1991 Department of DefenseArmy -
CONCRETE SPALL PROTECTION DEVELOPMENT
SBC: APTEK, Inc. Topic: N/AHIGH PRESSURE BLAST OR IMPACT LOADS ON THE OUTSIDE OF A CONCRETE WALL CAN CAUSE SPALLING OF THE INSIDE OF THE WALL. FLYING SPALL FRAGMENTS ARE DANGEROUS TO PERSONAL AND EQUIPMENT INSIDE CONCRETE BUILDINGS SUBJECTED TO ATTACK OR ACCIDENTIAL EXPLOSION. THIS PROPOSAL DETAILS THE LOGICAL, STEP-BY-STEP DEVELOPMENT OF A SPALL PROTECTION SYSTEM THAT CAN BE APPLIED TO NEW AND EXISTING CONCRETE WALLS. THE ...
SBIR Phase II 1991 Department of DefenseAir Force -
AN OPTIMAL MISSILE SHAPE DESIGN PACKAGE
SBC: APTEK, Inc. Topic: N/ATHE OVERALL GOAL OF PHASE I AND PHASE II IS TO DEVELOP SOFTWARE THAT WILL FIND THE OPTIMAL SIZE AND SHAPE OF MISSILE DESIGNS ACCORDING TO USER DEFINED DESIGN CRITERIA. PHASE I WILL SHOW THE FEASIBILITY OF MISSILE SHAPE DESIGN OPTIMIZATION BY COMBINING A GEOMETRIC MODELER, OPTIMIZATION SOFTWARE, AND FREE-FORM DEFORMATION WITH AN ANALYSIS MODULE. THE PHASE I ANALYSIS MODULE WILL CONTAIN AERODYNAMICS ...
SBIR Phase II 1991 Department of DefenseAir Force -
FOUR INPUT STACKED MICROWAVE ANTENNA
SBC: ATLANTIC AEROSPACE ELECTRONICS CORP. Topic: N/AN/A
SBIR Phase I 1991 Department of DefenseArmy -
LOW COST CONFORMAL ELECTRONICALLY SCANNED ANTENNA
SBC: ATLANTIC AEROSPACE ELECTRONICS CORP. Topic: N/AN/A
SBIR Phase I 1991 Department of DefenseArmy -
A HIGH-SPEED LASER SCANNING IMPACT SCORING SYSTEM
SBC: AUTOMATED PRECISION, INC. Topic: N/AA PHASE I RESEARCH AND DEVELOPMENT PROJECT TO DESIGN THE EQUIPMENT AND ALGORITHMS TO MEASURE THE IMPACT POINTS OF DIRECT FIRED PROJECTILES ON A VERTICAL MATRIX OF 12.5 METERS BY 12.5 METERS TO A CENTROID ACCURACY OF 1 CENTIMETER AND ANGLE OF INCIDENCE TO AN ACCURACY OF 1 MILLIDEGREE IS PROPOSED. THE CONCEPTUAL DESIGN, THE KEY SUBSYSTEMS, THE OPERATION PROCEDURES AND THE MEASUREMENT ALGORITHMS ARE ...
SBIR Phase I 1991 Department of DefenseArmy -
INT DEMO SYS OF PROTOTYPE DECISION AIDS FOR ATCCS
SBC: Bk-security Topic: N/ATHE PROPOSED RESEARCH EFFORT IS FOCUSED ON THE GOAL OF DEMONSTRATING THE EFFECTIVENESS OF USING LIBRARIES OF GENERIC HIGH LEVEL LANGUAGE, SYSTEMS LEVEL LANGUAGE, AND MACHINE LANGUAGE SOFTWARE CODE IN THE RAPID PROTOTYPING OF ARTIFICIAL INTELLIGENCE SYSTEMS ON MICROCOMPUTERS. THE CONCEPT IS VALIDATED HOLDS OUT SIGNIFICANT ADVANTAGES IN SPEED OF DEVELOPMENT, SPECIALIZATION, USER TO PROGRMMER INTERAC ...
SBIR Phase II 1991 Department of DefenseArmy -
SIMULTANEOUS ACOUSTO-OPTIC AND ELECTRO-OPTIC TECHNOLOGY FOR VERY ACCURATE LASER BEAM POINTING
SBC: BRIMROSE CORPORATION OF AMERICA Topic: N/AACOUSTO-OPTIC AND ELECTRO-OPTIC DEFLECTORS CAN BE USED AS A VERY FAST AND ACCURATE LAER BEAM STEERING AND POINTING DEVICES WITH NO MOVING PARTS. COMPARED TO A MECHANICAL GIMBAL, THEY ARE SMALL SIZE (IN A RANGE OF 1/2X1/2X1/2 INCH), LIGHTWEIGHT, AND LOW POWER CONSUMPTION. THE LATEST TECHNOLOGICAL ADVANCES IN HIGH FREQUENCY ACOUSTO-OPTIC TECHNOLOGY GIVES THE CAPABILITIES OF 20 MICRORADIANS ACCURACIE ...
SBIR Phase I 1991 Department of DefenseArmy
