List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Innovative Technologies for Detection and Discrimination of Surface and Buried Explosive Hazards

    SBC: Guidestar Optical Systems, Inc.            Topic: A15108

    Detecting buried in road or roadside explosive threats is a major problem facing the Army on todays battlefield. Recent studies have shown that Long Wave Infrared (LWIR) imaging polarimeters can detect these threats; however, the implementation of the polarimeters has not been traceable to a ruggedized, field ready imaging system. Guidestar Optical Systems proposes to develop an imaging LWIR polar ...

    SBIR Phase I 2016 Department of DefenseArmy
  2. Printable Materials with Embedded Electronics and Radio Frequency Components

    SBC: EngeniusMicro LLC            Topic: A16006

    Additive Manufacturing is a disruptive technology that has the ability to change how components are made, used and repaired. The past 10 years have seen a rapid increase in the availability of low cost 3d printers. The sophistication, quality and ease of use for these tools has been increasing rapidly while the cost is decreasing. There exists an emerging opportunity to combine printed electronics ...

    SBIR Phase I 2016 Department of DefenseArmy
  3. Low-cost Rapid Stand-off Detection of Explosives

    SBC: TDA Research, Inc.            Topic: A16011

    Detection and neutralization of explosive hazards including Home Made Explosives (HMEs) and Improvised explosive devices (IEDs) is an important problem for U.S. Army. IED attacks accounted for 62% of all U.S. casualties in Operation Enduring Freedom and are now accepted as a significant threat to homeland security and the U.S. forces all over the world. Hence, from a detection perspective, a capab ...

    SBIR Phase I 2016 Department of DefenseArmy
  4. Research in Tool Shape Optimization for Electrochemical Machining

    SBC: Corrdesa            Topic: A16013

    Electrochemical Machining (ECM) is controllable and scalable, harnessing corrosion to deliver the unique capability of machining complex shapes comprising very hard materials in relatively benign electrolytes. ECM tools have traditionally been designed by trial and error, which is time-consuming and expensive, making the process optimization and project management very difficult. The ECM process i ...

    SBIR Phase I 2016 Department of DefenseArmy
  5. High Q, nCCVD Epitaxial-BST, Fast Varactor Filters

    SBC: Engi-Mat Co.            Topic: A16017

    Today, commercial and military wireless communications systems require high functionalities for microwave components and devices.Filters are critical components for radar, electronic warfare, and modern microwave communication systems.Traditional approaches using banks of fixed filters and waveguide cavity or a dielectric resonator loaded cavity filters are bulky and heavy and dont fully meet the ...

    SBIR Phase I 2016 Department of DefenseArmy
  6. Innovative X-Band Antenna Architecture for BFT 3

    SBC: Envistacom, L.L.C.            Topic: A16032

    To enable the operation of Blue Force Tracking over the WGS satellite constellation, Envistacom proposes a phased array panel solution that is steered mechanically in the azimuth direction and steered electronically in elevation, giving full 360 degree azimuth coverage and -50 to 90 degree elevation coverage.Envistacom will use a combination of innovative panel design, filtering, and signal proces ...

    SBIR Phase I 2016 Department of DefenseArmy
  7. Multi-Band Body Wearable Antenna

    SBC: WANG ELECTRO-OPTO CORPORATION            Topic: A16033

    Under SBIR Topic A16-033, Multi-Band Body Wearable Antenna (MBWA), the U.S. Army seeks a new body wearable antenna design capable of operating effectively in multiple radio frequency bands and with various modulation techniques to provide a minimum range of 0.5 KM when both the transmitter and receiver are situated in horizontal positions on the ground. The MBWA will need to operate effectively in ...

    SBIR Phase I 2016 Department of DefenseArmy
  8. Multi-Band Body Wearable Antenna

    SBC: First RF Corporation            Topic: A16033

    Having successfully completed a Phase II program culminating in the delivery of 50 prototype SINCGARS antennas, FIRST RF understands the challenges of body-wearable antenna design and implementation. Given its substantial scope, FIRST RF recognizes that there is considerable risk involved in the Phase I effort. However, instead of starting from square one, FIRST RF will be able to leverage past wo ...

    SBIR Phase I 2016 Department of DefenseArmy
  9. Mission Command Enhanced Situational Awareness Display

    SBC: CREATIVE MICROSYSTEMS CORPORATION            Topic: A16038

    As sensors on the battlefield increase at an exponential rate, the amount of information available to Commanders and Staff of Army Mission Command is, at best, overwhelming. New technologies are emerging, specifically in Augmented Reality (AR), that show great promise to not only helping manage and share information to the Commanders at all levels, but also effectively increase their Situational A ...

    SBIR Phase I 2016 Department of DefenseArmy
  10. Digital Readout Integrated Circuits With Efficient, Low Power On-chip Data Compression

    SBC: BFE Acquisition Sub II, LLC            Topic: A16040

    There is a continuing push for very large format, very high dynamic range, very fast frame rate digital Infrared Focal Plane Arrays (IRFPAs) by the DOD community. Some emerging applications require FPA data rates >100 Gb/s; for commonly used Low Voltage Differential Signal (LVDS) output circuits with 1 Gb/s capability, this translates to 100 pairs of Dewar feedthrough wires creating un-manageable ...

    SBIR Phase I 2016 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government