Award Data

Improving the quality and intensity of the x-ray beam is an important design goal for every synchrotron installation. Although small, the effects of vacuum windows on x-ray absorption and phase contrast cannot be neglected. Synchrotron x-rays have wavelengths on the order of one Angstrom (1 x 10-10m), the same order of magnitude as inter-atomic distances. These x-rays are used to study many differ ...

This Small Business Innovation Research Phase 1 project proposes to develop a femtosecond laser system optimized for optical clocks and other precision metrology applications. In principle, atomic optical transitions have the potential to provide radically higher-accuracy timekeeping, because of the very high frequency of an optical transition. The problem of counting, or down-counting, the oscill ...

We propose to compare alternative architectures for phase noise measurement by directly sampling the RF waveform. Out of band modulation and cross correlation will reduce noise. The capabilities of each architecture will be determined using analysis and simulation. The results will be used to determine the feasibility of developing a commercially useful measurement instrument. If the results are p ...

The near chiral purity of the biosphere leads to a vast array of chiro-specific physiological responses. This chiro-specificity, in turn, gives rise to the need for the manufacturing of enantiomerically pure chiral chemicals, such as pesticides, pharmaceuticals, food additives, pigments, etc. Critical to the efficacy of both chiro-specific biology and chiro-synthesis/separation are the interfacial ...

We will develop a compact external cavity stabilization system, which will employ independent electro-optic control over the optical path length of the cavity and a wavelength-selective element. The system should be able to cover a 30 nm range and give mode-hop-free tuning over 20 nm intervals. The design of the feedback system will be compatible with any commercially available laser diode from 63 ...

The ability to electronically identify users and their devices is increasingly becoming an integral part of our interaction with computing platforms. Whether an operating system is contacting the manufacturer's web site to confirm its proper registration and payment today, or a cell phone is broadcasting entrance credentials to a secure physical site tomorrow, it is apparent that identifying infor ...

CAD CAM technologies have had an immense impact on the product development process in the last two decades. Current technologies, however, have limited knowledge representation and computational capabilities to enable collaboration of design decisions beyond commercial Internet based collaboration tools. In the Phase 1 Lateral Eye proposes to develop a new framework for Knowledge Integrated comput ...

This proposal is aimed at developing a full software solution for the next generation advanced optical metrology. Existing simulation tools cannot meet the current and future needs of scattering-based optical metrology for semiconductor manufacturing. Our proposed work will first focus on developing an enhanced RCWA-based simulation engine with advanced algorithms for fast convergence and stabilit ...

The Direct Digital Phase Noise Measurement Phase 1 SBIR demonstrated the feasibility of the technology to make the measurements required by the commercial marketplace. This new approach to phase noise measurements uses fast digital-to-analog converters to digitize the input RF signal and performs all down-conversion and phase detection functions by digital signal processing. It has several signifi ...

Homeland security and first responders need high quality & timely information upon which to make critical decisions. In a number of homeland security scenarios, the information will be a distillation of data gathered from an array of sensors. Such data can consist of temperature, vibration and the like along with the position of each sensor. This project proposes meeting this need through an innov ...