List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. An Enhanced Contact Plasma Reactor: A Competitive Remediation Technology for Per- and Perfluoroalkyl Substance (PFAS) Contaminated Water

    SBC: Dmax Plasma LLC            Topic: 17NCER1A

    Perfluoroalkyl substances (PFASs) have received considerable attention due to their toxicity, ubiquitous presence and recalcitrance. Manufacture and disposal of PFAS-containing products has resulted in PFAS contamination of numerous water supplies. Recent reports indicate the Air Force alone is expecting to spend > $2.25 billion for cleanup for PFAS-contaminated sites. Thus, there is a huge market ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Green Process for Plastic Chrome

    SBC: VERGASON TECHNOLOGY, INC.            Topic: 17NCER5B

    This green approach to manufacturing plastic with decorative chrome will eliminate health and environmental hazards from the chrome electroplating process. The US and global market for decorative chrome on plastic is 12 million m2/year and 84 million m2/year respectively, with 80% in automobile trim, 10% in appliances and 10% in sanitary fixtures. Without a viable commercial alternative, US provid ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. A Green Rooftop System for Commercial Buildings with Superior Energy Efficiency

    SBC: XIMAX Technologies Corporation Ltd            Topic: 17NCER6B

    This proposed project will develop a highly modularized green rooftop system that is not only longlasting but also assemble-able/disassemble-able. At roofs' end-of-life, it can be disassembled and_x000D_ 100% recycled. At buildings' end-of-life, if the roof still has enough useable life, it can be disassembled and reused elsewhere. Major environmental benefits of this technology are 1) nothing fro ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Parameter Development for the Scaled Manufacturing of Mycelium Bound Panels for Commercial Interior Products

    SBC: ECOVATIVE DESIGN LLC            Topic: 16NCER6A

    Ecovative Design uses grown mycelium structures to bind agricultural and wood byproducts into inherently nontoxic_x000D_ products containing no added urea formaldehyde or flame-retardant chemicals. This research program focuses_x000D_ on maturing mycelium technology for use in the production of large scale board products, from low density (LD) particle board to acoustic panels and thermal insulati ...

    SBIR Phase II 2018 Environmental Protection Agency
  5. Innovative Water Desalination System for Small Communities

    SBC: TDA Research, Inc.            Topic: 16NCER4A

    In many parts of the country groundwater withdrawals exceed recharge rates and this has caused groundwater-level declines, reductions to the volume of groundwater in storage, lower streamflow and lake levels. Development of brackish groundwater and seawater as an alternative water sources can_x000D_ help address concerns about the future availability of water. Thus, there is a need for a technolog ...

    SBIR Phase I 2017 Environmental Protection Agency
  6. Growth and Fungal Resin Generation for Manufacturing Novel, Formaldehyde-Free Wood Particleboard

    SBC: ECOVATIVE DESIGN LLC            Topic: 16NCER6A

    Engineered wood represents a $8.SB market in the United States annually. Resins instituted in the production of traditional engineered wood products (formaldehyde) have recently come under substantial scrutiny due to detrimental human heath effects. Ecovative is developing a drop-in replacement for engineered wood resins that is economically competitive and intrinsically safe. The mResin TM system ...

    SBIR Phase I 2017 Environmental Protection Agency
  7. Circuit board Component Recovery for Electronic Waste Reduction

    SBC: Advanced Recovery and Recycling, LLC            Topic: 14NCER1A

    Electronic Waste is the fastest growing waste stream in the US. Significant amounts are recoverable for reuse, resale, and refining for precious metals. The disassemblers send circuit boards to refiners/smelters for precious metals recovery. E-Waste disassemblers remove parts from these circuit boards, so only certain parts are smelted. As such they are the key market for our depopulator. Refiners ...

    SBIR Phase II 2016 Environmental Protection Agency
  8. Cost-effective Molecularly Imprinted Polymer Based Monitoring Technologies to Improve the Performance and Reliability of Small Drinking Water Systems

    SBC: SPORIAN MICROSYSTEMS INC            Topic: 14NCER4B

    Small drinking water systems consistently provide safe, reliable drinking water to their customers; however challenges of such systems include; lack of financial resources, aging infrastructure, lack of scale, and technical/logistical challenges associated with regulation compliance. The deployment ofnew cost-effective monitoring technologies hold opportunities to substantially advance infrastruct ...

    SBIR Phase II 2016 Environmental Protection Agency
  9. Isocyanate-Free Polyurethane Coating

    SBC: TDA Research, Inc.            Topic: 14NCER3B

    Polyurethanes are now made by reacting two components, one of which has toxic isocyanate groups. Isocyanates are especially hazardous to workers that spray-apply polyurethane paints. Researchers have developed less hazardous ways to make polyurethane, but they have poor performance, cure too slowly or are too expensive. In this project, TDA Research, Inc. (TDA) will develop new non-isocyanate two- ...

    SBIR Phase II 2016 Environmental Protection Agency
  10. Circuit Board Component Recovery for Electronic Waste Reduction

    SBC: Advanced Recovery and Recycling, LLC            Topic: 14NCER1A

    Electronic waste (e-waste) is the fastest growing municipal waste stream in America. Significant amounts of e-waste are actually not waste, but rather components recoverable for reuse, resale or recycled for their precious metals. In 2010, 3,320,000 tons of e-waste were generated (per “Municipal Solid Waste Generation, Recycling and Disposal in the United States; Tables and Figures for 2012,” ...

    SBIR Phase I 2015 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government