You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. MarsOasis- An Efficient Autonomously Controlled Martian Crop Production System

    SBC: Space Lab Technologies, LLC            Topic: T7

    The MarsOasistrade; cultivation system is a versatile, autonomous, environmentally controlled growth chamber for food provision on the Martian surface.nbsp; MarsOasistrade; integrates a wealth of prior research and Mars growth chamber concepts into a complete system design and operational prototype.nbsp; MarsOasistrade; includes several innovative features relative to the state of the art space gr ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  2. Validated Engineering Tools for Thin-Ply Composites

    SBC: Opterus Research and Development, Inc.            Topic: T12

    Opterus Research and Development, Inc. proposes to develop and validate multi-scale thin-ply High Strain Composites (HSCs) constitutive modeling tools for incorporation into commercial finite element analysis codes. The constitutive models will capture the time-temperature-load-deformation viscoelastic characteristics common to HSCs as well as the yielding or permanent deformation associated with ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  3. Sentient Science- A Multiscale Modeling Suite for Process and Microstructure Prediction in Metal Additive Manufacturing

    SBC: Sentient Science Corporation            Topic: T12

    In the Phase I period, Sentient upgraded its DigitalClone for Additive Manufacturing (AM) technology and successfully demonstrated and validated its ldquo;Process modelrdquo; and ldquo;Microstructure modelrdquo; for simulating metal AM processes. Sentient has partnered with University of Nebraska ndash; Lincoln for model validation.Specifically, Sentient has implemented a new ldquo;Process modelrd ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  4. Integrated Mid-Infrared Sources Enabled by Waveguides Written with Femtosecond Lasers

    SBC: AKTIWAVE LLC            Topic: T8

    This proposal addresses, for the first time, the demonstration of integrated mid-infrared sources based on waveguiding in a bonded solid-state laser material and periodically poled nonlinear material. A focused femtosecond laser beam allows for precisely localized modification of the refractive index of a material, therefore enabling to create waveguiding structures. The offeror has demonstrated f ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  5. OOA Process for Manufacture of Large Thin Gauge Composites

    SBC: Vistex Composites, LLC            Topic: T12

    Vistexrsquo;s patented Pressure Focusing Layer (PFLtrade;) technology utilizes a computationally optimized mold set that provides the same uniform pressure and temperature as an autoclave. NASA calls for an innovative out-of-autoclave processing method for thin-gauge structures. Vistexrsquo;s PFL process directly addresses this need. Specifically, the PFL processrsquo; core strength is its ability ...

    STTR Phase I 2020 National Aeronautics and Space Administration
  6. Numerical Simulation of Fields in Cavities with Detailed Antenna Modeling

    SBC: Electro Magnetic Applications, Inc.            Topic: T5

    Engineers at NASA are faced with the challenge of understanding complex electromagnetic effects that can impact payloads and launch vehicle hardware located under rocket fairings. Approximate approaches for modelingnbsp;antennas that interact with rocket fairingsnbsp;assume a plane wave incident upon the fairing for external antennas or a simple representation of the antenna (e.g., Hertzian dipole ...

    STTR Phase I 2020 National Aeronautics and Space Administration
  7. A New Oxygen Recovery Process to Reduce Waste from Propellant Tanks

    SBC: TDA Research, Inc.            Topic: T2

    After landing, the lunar lander liquid oxygen tank may contain as much as 5% residual oxygen that is pressurized with helium. TDA Research proposes to develop an oxygen recovery module which separates the helium from the oxygen so that the remaining high purity oxygen can be readily supplied to life-support equipment and fuel cells. The oxygen recovery module uses an advanced sorbent that has a hi ...

    STTR Phase I 2020 National Aeronautics and Space Administration
  8. High Capacity Sorbents for Removal of Problematic Contaminants from Processed Wastewater

    SBC: TDA Research, Inc.            Topic: T6

    Water recovery from wastewater sources is a key to long duration human exploration missions.nbsp; Regenerative systems are utilized on the International Space Station (ISS) to recycle water from humidity condensate and urine. However, two organic compounds, dimethylsilanediol (DMSD) and dimethyl sulfone (DMSO2), are problematic to water processor assembly (WPA) in the ISS. DMSD is a silicon-contai ...

    STTR Phase I 2020 National Aeronautics and Space Administration
  9. Autonomous In-space Assembly of Modular Structures

    SBC: ALTIUS SPACE MACHINES, INC.            Topic: T4

    The ESCHER interface is part of a larger concept working to enable swarms of robots to autonomously perform difficult construction tasks while minimizing the cost and complexity of doing so. The interface, designed by Altius for use on Virginia Tech#39;s FASER Lab robots, will leverage existing switchable electropermanent magnetnbsp;(EPM) technology and Altius custom geometries to provide a high h ...

    STTR Phase I 2020 National Aeronautics and Space Administration
  10. KAPS Biotech: A novel biomarker to improve prostate cancer diagnosis

    SBC: Kaps Biotechnology LLC            Topic: 102

    Abstract Prostate cancer (CaP) is the most common non-skin cancer in men and third most common cause of cancer deaths in men. Black men experience a higher burden of incidence and mortality from CaP compared to White men. The Prostate-Specific Antigen (PSA) test, a commonly used biomarker for early diagnosis and management of CaP, cannot alone accurately predict the presence of CaP, its aggressive ...

    STTR Phase II 2020 Department of Health and Human ServicesNational Institutes of Health
US Flag An Official Website of the United States Government