List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. DEVELOPMENT OF A TOTAL PEROXY DETECTOR FOR FLAME AND COMBUSTION MEASUREMENTS

    SBC: ADA Technologies, Inc.            Topic: N/A

    A RESEARCH AND DEVELOPMENT PROGRAM IS PROPOSED WHICH WILL DETERMINE THE TECHNICAL FEASIBILITY OF AN INSTRUMENT DESIGNED TO PROVIDE THE CAPABILITY OF MEASURING THE CONCENTRATION OF OXY AND PEROXY FREE RADICALS IN COMBUSTION STUDIES. THE DETECTOR FOR THE INSTRUMENT IS BASED ON AN AMBIENT FREE RADICAL DETECTOR WHICH USES AN AMPLIFICATION CHAIN REACTION BETWEEN THE FREE RADICALS AND CO AND NO WHICHRES ...

    SBIR Phase II 1987 Department of Energy
  2. ROBOTIC WINDING IN A PLASMA SPRAY HIGH TEMPERATURE-VACUUM ENVIRONMENT

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: N/A

    FABRICATION OF ADVANCED COMPOSITES INCLUDES MANY PROCESSES, SOME ARE AUTOMATED, OTHERS ARE ENTIRELY MANUAL. ROBOTIC WINDING SYSTEMS (ROWS) WAS INVENTED BY THE PRINCIPLEINVESTIGATOR IN AN ATTEMPT TO CREATE AN AUTOMATED TECHNIQUE OF LAYING UP PRE-IMPREGNATED MATERIAL AROUND A FORM WITH COMPLEX SHAPE. CONVENTIONAL WINDING EQUIPMENT REQUIRES THE MANDREL TO ROTATE WHILE THE MATERIAL IS DRAGGED ALONG TH ...

    SBIR Phase I 1987 National Aeronautics and Space Administration
  3. AUTOMATED FABRICATION OF NET SHAPE MICROSTALLINE AND COMPOSITE METAL STRUCTURES WITHOUT MOLDS

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: N/A

    THIS PROJECT INVOLVES THE DEVELOPMENT OF A NEW TECHNIQUE FOR THE GENERATION OF COMPLEX THREE-DIMENSIONAL STRUCTURES DIRECTLY FROM A CAD/CAM DATABASE WITHOUT THE NEED FOR PRELIMINARY PROCESSES (MOLDS) OR SUBSEQUENT MACHINING (THE PARTS ARE FABRICATED TO NET SHAPE). THE INNOVATION IS TO USE INDEPENDENTLY TARGETED PARTICLES OF METAL OR COMPOSITE METAL TO BUILD STRUCTURES UNDER COMPUTER CONTROL IN MUC ...

    SBIR Phase I 1987 National Science Foundation
  4. UNIVERSAL END-EFFECTOR WITH TORQUE FEEDBACK FOR HAND VALVES

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: N/A

    N/A

    SBIR Phase I 1987 National Aeronautics and Space Administration
  5. SYNTHESIS OF ULTRAFINE METAL AND ALLOY POWDERS

    SBC: ADVANCED REFRACTORY TECHNOLOGIES, INC.            Topic: N/A

    THE TREND IN ALL MATERIALS IS TOWARD THE CONTROL OF MICROSTRUCTURE. IN CERAMICS AND CERMETS THE EMPHASIS IS ON THE REDUCTION OF CRYSTALLITE SIZE AND THEREBY ON IMPROVING PHYSICAL PROPERTIES. POWDERS SHOULD BE EQUIZAXED AND LIMITED TO SUBMICRON RANGE, WITHIN A NARROW AND SPECIFIC SIZE DISTRIBUTION. EVEN MORE IMPORTANTLY LARGE QUANTITIES OF POWDERS MUST BE AVAILABLE AT REASONABLE COST. AS PRESENTLY ...

    SBIR Phase I 1987 Department of DefenseNavy
  6. IMPROVED MATERIALS FOR CERAMIC ARMOR FABRICATION

    SBC: ADVANCED REFRACTORY TECHNOLOGIES, INC.            Topic: N/A

    THE ABILITY TO FABRICATE CERAMIC ARMOR ECONOMICALLY IS DEPENDENT UPON SEVERAL FACTORS INCLUDING POWDER COST, FABRICATION TECHNIQUE, AND FINAL MACHINE COST. CANDIDATE CERAMIC SUCH AS TIB (2), AND B (4)C DO NOT SINTER TO FULL DENSITY. THEREFORE, NEAR-NET SHAPE FORMATION IS DIFFICULT AND EXPENSIVE, ESPECIALLY WHERE COMPLEX GEOMETRIES ARE INVOLVED. ART PROPOSES TO UTILIZE NEW POWDER SYNTHESIS TECHNOLO ...

    SBIR Phase II 1987 Department of DefenseNavy
  7. ELECTRONIC EQUIPMENT SHELTERS

    SBC: Advanced Composite Technology            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseAir Force
  8. INTEGRATED MODELING TOOL FOR PERFORMANCE ENGINEERING OF COMPLEX COMPUTER SYSTEMS

    SBC: ADVANCED SYSTEMS & TECHNOLOGIES INC            Topic: N/A

    DURING THE DEVELOPMENT OF COMPLEX COMPUTER SYSTEMS, PERFORMANCE ENGINEERING TECHNIQUES ARE OFTEN NOT APPLIED OR ARE MISAPPLIED WHICH RESULTS IN SYSTEMS THAT DO NOT MEET THESPECIFIED PERFORMANCE CRITERIA OR MUST UNDERGO COSTLY REDESIGNS. AN INTEGRATED COMPUTER SYSTEM MODELING LANGUAGE OVERCOMES THE DEFICIENCIES OR TRADITIONAL ANALYTIC AND SIMULATION MODELING TOOLS BY EXPLOITING THE STRENGTHS FROM B ...

    SBIR Phase II 1987 National Aeronautics and Space Administration
  9. ARCHITECTURE EVALUATION TEST BED

    SBC: ADVANCED SYSTEMS & TECHNOLOGIES INC            Topic: N/A

    THE ESTIMATION OF THE COMPUTER CAPACITIES REQUIRED TO SUPPORT A MISSION ARE USUALLY THE SUBJECT OF MUCH DISCUSSION. ESTIMATES OF THE WORKLOAD AND OTHER PARAMETERS VARY GREATLY. THE REASON FOR THIS IS THAT MOST APPLICATIONS DO NOT FIT THE TRADITIONAL TIMING AND SIZING EFFORT. NONE OF THE THREE COMPONENTS (WORKLOAD, PERFORMANCE REQUIREMENTS AND ARCHITECTURE) IS USUALLY PRESENT. WE CONTEND THAT THE M ...

    SBIR Phase I 1987 Department of DefenseNavy
  10. INTEGRATED RELIABILITY AND TIMING DESIGN ANALYSIS TOOL

    SBC: ADVANCED SYSTEMS & TECHNOLOGIES INC            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government