You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
High Performance Electrolytes for Electrochemical Capacitors
SBC: ADA TECHNOLOGIES, INC. Topic: 17a79591 High performance, long-cycle-life energy storage devices are critical in advanced transportation technologies, e.g., electric vehicles (EV) and hybrid electric vehicles (HEV). Electrochemical capacitors (aka, supercapacitors or ultracapacitors) are being developed as power assists for HEVs. However, a major obstacle in this application limited performance and short lifetimes, determined by ...
SBIR Phase I 2005 Department of Energy -
Thermal Management via Hybrid Wafers and Devices
SBC: ASTRALUX, INC. Topic: 29a79748S Silicon (Si) has been the workhorse of the electronics industry since the invention of the transistor, and engineers have found new ways to push the limits of processing speed and power handling ability of Si chips. Decreasing the gate lengths, increasing the number of processors per unit area, and increasing the clock speed has led to increasing the microprocessor computing power from 0.3 ...
SBIR Phase I 2005 Department of Energy -
Thermionic Conversion of Automotive Waste Heat
SBC: ASTRALUX, INC. Topic: N/A79590B Automobile engines generate significant waste heat, which could be recovered and converted to electricity to meet the growing demand for electric power. Thermionic emission allows waste heat to be converted, but traditional thermionic materials provide very low conversion efficiencies at the moderate temperatures (400-600¿C) found in an automobile exhaust system. Thus, there is a need t ...
SBIR Phase I 2005 Department of Energy -
A System of Observation, Analysis and Verification for the Stable Isotopes of Carbon Dioxide
SBC: Atmospheric Observing Systems, Inc. Topic: 08b78555S DOE requires rapid, cost-effective methods for measuring the isotopic composition of atmospheric carbon dioxide. For discrete sampling, the [13CO2]/[12CO2] ratio must be measured to a precision of 0.2¿. For continuous monitoring (e.g. a one hour period), a resolution of 10 times less (~3¿) is acceptable. The instrumentation must be robust enough to operate properly for a full range of ...
SBIR Phase I 2005 Department of Energy -
Expendable Probes for Carbon Dioxide
SBC: Atmospheric Observing Systems, Inc. Topic: 0878574S A wide range of practical instruments is needed for monitoring carbon dioxide concentrations of the land, air, and sea. Moderate accuracy and precision of order 1 ppm (dry mole fraction) will suffice. Expense, weight, size, and electrical power must be kept low to make the instrumentation applicable to a large number (~10,000) of one-way deployments per year. Accessible platforms include ...
SBIR Phase I 2005 Department of Energy -
Vertically Integrated Measuring and Monitoring Instrumentation for Terrestrial Sinks and Sources of Carbon Dioxide
SBC: Atmospheric Observing Systems, Inc. Topic: 0878556S A vertically integrated system is needed to quantify the sources and sinks of carbon dioxide for terrestrial ecosystems. The system requires a broad coherence across spatial scales ranging from sub-meter plots of vegetation and soils up to the full ecosystem. The coherence is enforced by an additional requirement that the results of each spatial scale support and verify the results of neig ...
SBIR Phase I 2005 Department of Energy -
Downhole Heater Cables for Oil Shale Recovery
SBC: COMPOSITE TECHNOLOGY DEVELOPMENT, INC. Topic: 1278469S Downhole heaters, capable of long-term 900¿C operation, are needed to assist in oil shale recovery. Currently available mineral-insulated (MI) cables are not capable of surviving the temperature or downhole environmental conditions encountered in this application. Additionally, the insulation must exhibit good electrical properties and resistance to the humidity encountered in downhole e ...
SBIR Phase I 2005 Department of Energy -
New Highly Radiation-Resistant Insulation Process for High Field Accelerator Magnets
SBC: COMPOSITE TECHNOLOGY DEVELOPMENT, INC. Topic: 3578092S High performance, wind-before-react magnet insulation systems, which enable the use of thinner insulation for close packing of the conductor and can withstand high radiation loads, are needed for future accelerator magnets such as the Large Hadron Collider project. However, the most radiation-resistant ceramic insulation systems currently available for use as wind-and-react insulation have ...
SBIR Phase I 2005 Department of Energy -
Innovative Nanoparticle Insulation Systems for Fusion Magnets
SBC: COMPOSITE TECHNOLOGY DEVELOPMENT, INC. Topic: 33c78759S Fusion magnets require insulation materials that possess high shear strength, excellent electrical insulation characteristics, and radiation resistance. Improvements in insulation technology can contribute to improved magnet performance, and will enable scientists and engineers to overcome current magnet design limitations. To improve the shear strength of composite insulation materials, ...
SBIR Phase I 2005 Department of Energy -
Innovative, Low Cost, Radiation-Resistant Fusion Magnet Insulation
SBC: COMPOSITE TECHNOLOGY DEVELOPMENT, INC. Topic: 02c75747S Newly designed and proposed fusion magnet systems will require electrical insulation capable of withstanding high temperatures and high radiation doses. The lack of cost-effective, radiation-resistant insulation systems is compromising the design and operation of these devices. Therefore, this project will develop and formulate low-cost organic resins for use in the production of fusion ...
SBIR Phase II 2005 Department of Energy