List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Ultra-stable, Portable Fabry-Perot Cavities

    SBC: Boulder Precision Electro-optics            Topic: SB12A001

    Frequency stabilized lasers are essential subsystems in many applications. Most importantly, they are used as flywheel oscillators in optical atomic clocks, as well as in many sensing and measurement systems, and some examples are down oil well sensing, l

    STTR Phase II 2015 Department of DefenseDefense Advanced Research Projects Agency
  2. Electronic Component Fingerprinting to Determine Manufacturing Origin

    SBC: Clearmark Systems, LLC            Topic: SB133003

    ClearMark Systems has developed a sensitive and non-destructive inspection technology for identifying the point of origin of semiconductor chips.We capture the identifying information by analyzing markings on the silicon die or the chip package made by laser marking tools at the fabrication facility.Our Phase I effort has successfully distinguished markings that were made by a target tool versus s ...

    SBIR Phase II 2015 Department of DefenseDefense Advanced Research Projects Agency
  3. Flexible CPU/GPU Computational Plasma Application with Particles and Fluids

    SBC: TECH-X CORPORATION            Topic: SB143002

    The proposed work will lead to the development of a flexible plasma simulation capability that can make use of computational accelerators such as GPUs when present. The eventual computational application will be able to transition from full fluid modelin

    SBIR Phase I 2015 Department of DefenseDefense Advanced Research Projects Agency
  4. Dynamic Pressure Based Prosthetic Socket Fit Diagnostic Tool

    SBC: ADA Technologies, Inc.            Topic: SB151001

    Due to the difficulties currently involved in fitting prosthetic sockets and the overall subjective nature of the process, DARPA seeks the development of innovative diagnostic tools for quantifying the characteristics of the socket-limb interface during the fitting process. In recent years, prosthetic design has made leaps and bounds implementing robotics to enhance prosthetic performance and ampu ...

    SBIR Phase I 2015 Department of DefenseDefense Advanced Research Projects Agency
  5. Lightweight, Man-Portable, Low-Power Individual Water Purification System

    SBC: TDA Research, Inc.            Topic: SB151002

    In todays military, active special operators must be highly mobile and carry all their essential equipment and supplies with them. A major limitation to mobility is the need to carry fresh water. An individual must carry 12 to 24 pounds of water for each day they will be in the field without re-supply. It would be far better to be able to purify locally available water, but no technology exists ...

    SBIR Phase I 2015 Department of DefenseDefense Advanced Research Projects Agency
  6. Portable Microwave Cold Atomic Clock

    SBC: Spectra Dynamics Inc            Topic: SB141004

    We present the design of a small, portable, microwave cold atomic clock that meets the frequency stability requirement of

    SBIR Phase II 2015 Department of DefenseDefense Advanced Research Projects Agency
  7. PROBABILISTIC EXTENSIONS TO MODEL BASED PROGRAMMING LANGUAGES

    SBC: METAMORPH INC            Topic: SB142003

    Metamorph is proposing to develop a methodology and tools to apply Probabilistic Programming to System Level Design in our DARPA Phase II SBIR proposal. System design relies significantly on numerical predictions provided by computational models and simulations, however, an objective assessment of confidence in the predictions is a major challenge.Metamorphs proposal is built upon a System Level D ...

    SBIR Phase II 2015 Department of DefenseDefense Advanced Research Projects Agency
  8. Scalable Microcell Process for Alkali Atom Based Sensors

    SBC: TRIAD TECHNOLOGY INC.            Topic: SB152003

    Triad Technology is proposing development of scalable process for fabrication of an all glass microcell with a getter/dispenser surface coating. The microcell fabrication process will provide the capability to build and fill multiple microcell at one time.

    SBIR Phase I 2015 Department of DefenseDefense Advanced Research Projects Agency
  9. Low Cost Expendable Launch Technology

    SBC: ROCKET LAB USA, INC.            Topic: SB152008

    Rocket Lab USA, Inc. proposes to develop and demonstrate how the use of the Electron launch vehicle either as an upper stage in support of the XS-1 program or dedicated small launch vehicle could employ the use of Automated Flight Termination (AFTS) technologies to reduce the cost of access to space without adversely impacting public safety. Providing the launch opportunity to obtain flight telem ...

    SBIR Phase I 2015 Department of DefenseDefense Advanced Research Projects Agency
  10. High Performance Microminiature Free Space Shutter for CAMS

    SBC: Coldquanta, Inc.            Topic: SB142005

    ColdQuanta proposes the development, fabrication, testing and demonstration of a free-space microshutter based on MEMS technology. The microshutter head will provide extinction ratios exceeding 70 dB and shutter transition times below 10 us, and it will be smaller than any other free space shutter technology currently available. The proposed shutter leverages prior experience with the successful d ...

    SBIR Phase II 2015 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government