You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. GPS Autonomous Micro-Monitor (GAMMA)

    SBC: ATMOSPHERIC & SPACE TECHNOLOGY RESEARCH ASSOCIATES LLC            Topic: AF112065

    ABSTRACT:Ionospheric scintillation and TEC are required by the IORD. We propose a GPS Autonomous Micro-Monitor (GAMMA) that makes measurements of Ionospheric scintillation and TEC. GAMMA will be remotely deployable, such as on an ocean buoy or in a battlefield. It will send data to the user via the Iridium satellite network in near real-time. GAMMA will make use of ASTRAs existing Connected Autono ...

    SBIR Phase II 2015 Department of DefenseAir Force
  2. High-Speed Weapon Radomes

    SBC: FIRST RF CORPORATION            Topic: AF121092

    ABSTRACT:As more and more advanced hypersonic weapons are developed, vehicle temperatures are expected to near 1250K (977C); as flight times increase, these temperatures are expected to saturate the entire vehicle.Typically, forward-looking RF and IR sensors are collocated in the same protective radome, which degrades the performance of both systems.FIRST RF proposes a significantly different appr ...

    SBIR Phase II 2015 Department of DefenseAir Force
  3. Fusion of Space Weather Data with Satellite Telemetry

    SBC: DATA FUSION & NEURAL NETWORKS, LLC            Topic: AF112066

    ABSTRACT:The DF&NN team proposes to provide automated space weather (SpWx) attribution tools to characterize abnormal events detected at operational sites using the DF&NN patented Enterprise Satellite-as-a-Sensor (E-SAS) system.The DF&NN Space Situational Awareness (SSA) fusion tools, Modern Technology Solutions Incorporated operational experience, Space Environment Technologies SpWx expertise, an ...

    SBIR Phase II 2015 Department of DefenseAir Force
  4. GridCloud: A Secure Processing and Data Management Solution Using.Crunch V3

    SBC: COLORADO ENGINEERING INC.            Topic: AF121040

    ABSTRACT:The Joint Environment Toolkit (JET) Increment 2 architecture consists of servers at six globally distributed Operational Weather Squadrons (OWS).Each server must handle peak demand of weather analysis and forecast information from 30-40 Weather Flights (WFs, which provide tactical weather information to pilots) in addition to 1,000 or more other operational users within their area of resp ...

    SBIR Phase II 2015 Department of DefenseAir Force
  5. Ultra-stable, Portable Fabry-Perot Cavities

    SBC: Boulder Precision Electro-optics            Topic: SB12A001

    Frequency stabilized lasers are essential subsystems in many applications. Most importantly, they are used as flywheel oscillators in optical atomic clocks, as well as in many sensing and measurement systems, and some examples are down oil well sensing, l

    STTR Phase II 2015 Department of DefenseDefense Advanced Research Projects Agency
  6. Electroplated Alloys for Replacement of Hard Chrome on Stainless Steel Actuators

    SBC: TDA RESEARCH, INC.            Topic: AF131202

    ABSTRACT: Electrolytic Hard Chrome (ECH) is the standard coating method for 4XXX steels used in actuators and depot-based repair of damaged items. The properties of EHC coatings are excellent, and as a result EHC coatings have been used for more than 50 years. Unfortunately, EHC plating uses hexavalent chromium (Cr6+) that is regulated by both OSHA and the EPA. Health and environmental concern ...

    SBIR Phase I 2015 Department of DefenseAir Force
  7. Variable Precision Filters

    SBC: The Athena Group, Inc.            Topic: AF141003

    ABSTRACT: In this Phase I SBIR project, the Athena Group, Inc., will develop a mathematical framework and expert system design tool for robust and highly efficient filter design. The developed tool will be capable of designing filters that have challenging requirements, such as sharp transitions, narrow subbands, and/or complicated passband structures. The developed expert system will be able to ...

    SBIR Phase I 2015 Department of DefenseAir Force
  8. Robust, automatic design of highly efficient, variable precision filters

    SBC: The Numericus Group, LLC.            Topic: AF141003

    ABSTRACT: The Numericus Group, LLC (TNG) is proposing a paradigm shift for digital filter design, opening a number of technological opportunities that TNG is uniquely qualified to pursue. At the heart of this new paradigm are algorithms that are guaranteed to converge and do not require an expert to oversee their operation, unlike many existing algorithms commonly used today. The new approac ...

    SBIR Phase I 2015 Department of DefenseAir Force
  9. Innovative DMFC Power Supply for NDI Hand Tools

    SBC: MAINSTREAM ENGINEERING CORP            Topic: AF141204

    ABSTRACT: The Air Force regularly uses eddy current and ultrasonic NDI equipment which can be configured with a wide range of battery chemistries. Many of these battery chemistries, which include toxic heavy metals, are detrimental to the environment and can be difficult and costly to dispose of. The Air Force is seeking a new power supply for applicable NDI equipment that reduces the environment ...

    SBIR Phase I 2015 Department of DefenseAir Force
  10. Method for Evaluating Candidates for Additive Manufacturing (AM) Processes

    SBC: Keystone Synergistic Enterprises, LLC            Topic: AF141213

    ABSTRACT: The primary objective of the Phase I project is to establish the feasibility of applying a methodology to assess a candidate legacy part to determine the viability of using Additive Manufacturing methods to produce the part. This objective will be accomplished by creating a guided decision framework that determines if a part aligns with the critical process characteristics and economic ...

    SBIR Phase I 2015 Department of DefenseAir Force
US Flag An Official Website of the United States Government