List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Resilient Wayside Structures to Reduce Severity of Passenger Equipment Collisions and Derailments

    SBC: PROTECTION ENGINEERING CONSULTANTS LLC            Topic: 171FR3

    Proposal title: Resilient Wayside Structures to Reduce Severity of Passenger Equipment Collisions and Derailments Additional passenger fatalities/injuries can occur during derailments involving interaction with wayside structures. Analogously, automobile fatalities often result from interaction of vehicles with roadside structures; personnel hazard reduction is a key design criterion for roadsid ...

    SBIR Phase II 2018 Department of Transportation
  2. Biodegradable Lubricants from Renewable Feedstocks

    SBC: Tetramer Technologies,L.L.C.            Topic: 88

    Current agriculture and off-road equipment requires the use of lubricants to ensure efficient operation of integral hydraulic and gear driven systems. The lubricants, either oils or greases, aid in reducing friction, dissipating heat, prevent oxidation, and seal of water and debris from vital areas of the equipment. During operation, equipment may have slight leaks or suffer catastrophic failures ...

    SBIR Phase I 2018 Department of Agriculture
  3. Production of Refined Cane Sugar from Sugar Mills without an Attached Refinery

    SBC: CHOU, CHI            Topic: 85

    The one-step cane sugar process respondsto the USDA NIFA SBIR Program Priorities in regards to agriculturally related manufacturing technology and energy efficiency. The technology developed from this project will (1) reduce the energy and water consumed per cane sugar product, (2) provide an economic alternative for producing U.S. Food Grade sugar worldwide, (3) eliminate hazardous solid waste pr ...

    SBIR Phase I 2018 Department of Agriculture
  4. Micro-aligned 1 Tesla solenoid for high-energy bunched-beam electron cooling

    SBC: Accelerator Technology Corporation            Topic: 29d

    The JLab Electron-Ion Collider (JLEIC) is proposed to collider spin-polarized beams of electrons and ions at high energy and high luminosity- Sustaining high luminosity requires the use of bunched-beam electron cooling to control emittance growth in the circulating ion beam- The electron cooling requires that a bunched electron beam be coalesced with the ion bunches so that they travel with the sa ...

    SBIR Phase I 2018 Department of Energy
  5. rtmApp: A SaaS Application for Multiscale Reactive Transport Modeling

    SBC: AQUANRG CONSULTING INC.            Topic: 15a

    Current computational predictive tools are not benefited from state-of-the-art algorithms and hardware to simulate complex physical-chemical processes which occur in various material and energy systems- These simulation software: 1) simplify complex geometries, 2) model either physical or chemical processes, 3) are incapable of capturing physical and chemical properties which span vast length scal ...

    SBIR Phase I 2018 Department of Energy
  6. Thermo- and pH-responsive Supramolecular Gelling Agents for Enhanced Oil and Natural Gas Recovery from Tight Formations

    SBC: Incendium Technologies LLC            Topic: 20b

    Shale oil and natural gas, recovered mainly via hydraulic fracturing, has a significant role in meeting the U-S- energy demand in near future- Characteristics and properties of injected fluids used in hydraulic fracturing directly affect the amount of recovery- Since current injection fluid technologies result in low recovery factors, oil and gas industry is seeking new injection fluids to increas ...

    SBIR Phase I 2018 Department of Energy
  7. Miniature Recoil Ion Mass Spectrometer enables correlative elemental isotopic and backscatter analysis from solid nanovolumes

    SBC: Ionwerks, Inc.            Topic: 24b

    Mass spectrometric measurement of elemental isotopic ratios from solids has been mostly obtained by secondary ion mass spectrometry (SIMS) which has a sensitivity for almost all elements superior to Xray fluorescence and laser desorption ICPMS- In SIMS elemental and molecular ions are liberated from the near surface of a solid by energetic micron or submicron focused ion beams and extracted with a ...

    SBIR Phase I 2018 Department of Energy
  8. Field pilot test of Novel Biological EOR Process for Extracting Trapped Oil from Unconventional Reservoirs

    SBC: New Aero Technology LLC            Topic: 20b

    Hydrocarbons will remain an important energy source for the foreseeable future- Unconventionals are plentiful but decline quickly- Successful application of AERO Technology can recover a significant portion of this enormous resource into the world's energy marketplace- AERO technology acts via interfacial tension alteration and bio-diversion of fluids to improve oil mobility and sweep efficiency ...

    SBIR Phase I 2018 Department of Energy
  9. High Performance Computing for Rapid Design and Optimization of Roll-to-Roll Etch Processes

    SBC: Sandbox Semiconductor Incorporated            Topic: 03a

    Despite its potential to lower costs and increase throughput, roll-to-roll nanomanufacturing has yet to become widely used by the private sector due to a lack of industry standardization and the dearth of available data on roll-to-roll process limits- To address this knowledge gap and increase roll-to-roll adoption, a high-performance computing simulation tool will be developed- This tool will pro ...

    SBIR Phase I 2018 Department of Energy
  10. New Approaches to Improved PEM Fuel Cell Catalyst Layer

    SBC: Tetramer Technologies,L.L.C.            Topic: 17a

    Polymer-electrolyte membrane (PEM) fuel-cells are one of the most promising energy conversion technologies for renewable clean energy applications- A major challenge preventing the widespread use and commercialization of PEM fuel cells is achieving high performance with low-loadings of platinum group metal (PGM) catalysts- One of the factors driving performance limitations in the cell is the mass ...

    SBIR Phase I 2018 Department of Energy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government