Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Innovative Matrix Systems for Carbon Fiber Reinforced Composite Tactical Rocket Motor Applications

    SBC: Texas Research Institute, Austin, Inc.            Topic: A15105

    A composite matrix resin was demonstrated during Phase I that will reduce the cost of structural tactical motor hardware. While the resin was designed specifically for filament winding applications, the technology could easily be transitioned to additional composite fabrication areas. Formulated resin systems were prepared to obtain the desired processing properties and high glass transition tempe ...

    SBIR Phase II 2018 Department of DefenseArmy
  2. Tunable LWIR Notch Filter Metasurfaces

    SBC: NANOHMICS INC            Topic: A16094

    For dynamic protection of LWIR sensors from laser dazzler threats, Nanohmics, Inc., proposes to develop a thin, light-weight, electronically tunable notch filter based on microfabricated graphene-integrated metasurfaces.The optical filter can reject a specific narrow spectral line (notch) or multiple simultaneous notches.The metasurface comprises an engineered array of resonant microstructure nano ...

    SBIR Phase II 2018 Department of DefenseArmy
  3. Electronic grade, single crystal or large-grain polycrystalline diamond wafer development.

    SBC: PLASMABILITY, LLC            Topic: A16021

    The goal of the Phase II program is to demonstrate growth of large-area single-crystal diamond substrates having surface area of 6 cm2 and suitable for electronic device applications. This will represent a major leap in available substrate area, from less than 1 cm2 available today. The technical path will directly follow the work begun in the Phase I program, which is, using our toroidal plasma C ...

    SBIR Phase II 2018 Department of DefenseArmy
  4. Expendable Active RF Technology for Helicopters (EARTH)

    SBC: Systems & Processes Engineering Corporation            Topic: A16097

    Systems & Processes Engineering Corporation (SPEC) is proposing a fast moving Phase II Expendable Active RF Technologies for Helicopters (EARTH) program to deliver a fully functional 1x2x8 active expendable RF countermeasures prototype flight unit, which is form/fit compatible with the AN/ALE-47 dispenser. The proposed countermeasures flight unit (microUAV) expendables are configured with multifun ...

    SBIR Phase II 2018 Department of DefenseArmy
  5. Aft Looking Spectrometer for Plume Characterization and Waking on Re-entry

    SBC: NANOHMICS INC            Topic: MDA16016

    Nanohmics proposes to develop a hyperspectral imager for aft-looking sensing of phenomenology associated with target vehicles.The payload is designed to operate with existing components and has no moving parts.The high spectral resolution will provide feedback for signature models and the spatial resolution will allow the spectral signatures to be associated with specific phenomena.Approved for Pu ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  6. Methodologies for Cost-Effective Measurement of Dynamic Material Properties or Characterization of Materials under Dynamic Loads

    SBC: PROTECTION ENGINEERING CONSULTANTS LLC            Topic: MDA16T003

    Explosions and high-velocity impacts can create strain rates on the order of 105 to 107 s-1.To simulate these events, first-principles codes require material models that are valid at these loading rates.Currently, the amount of test data, material models and material constants for this strain rate range is extremely limited, and an innovative and cost-effective laboratory test procedure is needed. ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  7. Monolithic photonic platform for high-power InGaAs/AlInAs quantum cascade laser beam combining and steering

    SBC: TransWave Photonics, LLC            Topic: A17AT006

    TransWave Photonics, LLC proposes to develop mid-wave infrared photonic integrated circuits based on monolithic integration of passive low-loss waveguides, thermo-optically tunable photonic elements, and quantum cascade gain sections within the same InGaAs/AlInAs/InP platform. The proposed approach will enable power combining and 2-dimensinoal beam steering of the outputs from multiple high-power ...

    STTR Phase II 2018 Department of DefenseArmy
  8. Multiple Antenna Element Approach to a Combined Precision Attitude Determination and GPS Anti-Jamming/Spoofing Capability

    SBC: UHU TECHNOLOGIES LLC            Topic: A15AT013

    A multichannel GPS system, with associated Controlled Radiation Pattern Antenna Array (CRPA) design, will provide continuous position and attitude determination. This system supports L1/L2 and SAASM or M-Code modes under both GPS jamming, and spoofing attack, to maintain navigation and attitude in contested environments. The system uses direction finding to determine angle of arrival (AOA for the ...

    STTR Phase II 2018 Department of DefenseArmy
  9. EMS Monitor & Broadcast Training Capacity Enhancement

    SBC: Kerberos International, Inc.            Topic: A15AT008

    Americas current electronic warfare (EW) capabilities are insufficient for the modern and future battlefield. To safeguard against radio-controlled threats and disrupt enemy communications, our current EW systems blindly jam broad swaths of the electromagnetic spectrum (EMS). This approach interferes with Blue Force data and voice communications, requires large power sources and generates distinct ...

    STTR Phase II 2018 Department of DefenseArmy
  10. Continuous Mode Conveyor Cooking Appliance for Unitized Group Rations (UGR-A) for Military Field Feeding

    SBC: Texas Research Institute, Austin, Inc.            Topic: A16061

    Modern military field kitchens are required to provide high volume throughput while maintaining the best quality of group feeding rations for the Warfighter.The Army's legacy JP-8 fired appliances fall short, relying on inefficient burner units that subject cooks to excessive heat, exhaust, and noise.There is an opportunity to develop a reliable, continuous mode conveyor cooking system that prepar ...

    SBIR Phase II 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government