List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Aft Looking Spectrometer for Plume Characterization and Waking on Re-entry

    SBC: NANOHMICS INC            Topic: MDA16016

    Nanohmics proposes to develop a hyperspectral imager for aft-looking sensing of phenomenology associated with target vehicles.The payload is designed to operate with existing components and has no moving parts.The high spectral resolution will provide feedback for signature models and the spatial resolution will allow the spectral signatures to be associated with specific phenomena.Approved for Pu ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  2. Methodologies for Cost-Effective Measurement of Dynamic Material Properties or Characterization of Materials under Dynamic Loads

    SBC: PROTECTION ENGINEERING CONSULTANTS LLC            Topic: MDA16T003

    Explosions and high-velocity impacts can create strain rates on the order of 105 to 107 s-1.To simulate these events, first-principles codes require material models that are valid at these loading rates.Currently, the amount of test data, material models and material constants for this strain rate range is extremely limited, and an innovative and cost-effective laboratory test procedure is needed. ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  3. Advanced Materials for Radiation Hardening

    SBC: ADVANCED POWDER SOLUTIONS INC            Topic: MDA05031

    Developing low cost, lightweight, multifunctional Radiation Hardened materials with high specific stiffness, that are environmentally safe, provide low risk/liability, designable structures is extremely important for the Department of Defense in this current climate of reduced spending. As new Radiation Hardening requirements are identified for DoD programs, the development of lightweight, Radia ...

    SBIR Phase II 2007 Department of DefenseMissile Defense Agency
  4. Ultra-Strong High-Temperature Bonding of Titanium to Ceramic Materials

    SBC: Integrated Micro Sensors, Inc.            Topic: MDA05024

    Currently the IRBAS ceramic radomes of the PAC-3 missiles are being attached at the Lockheed Martin Missile & Fire Control Corp (LMMFC) using an adhesive bonding process that is not capable to sustain high mechanical and thermal stresses required for this application. Conventional high-temperature brazing in a furnace cannot be applied due to the large size of the components being bonded and high ...

    SBIR Phase II 2007 Department of DefenseMissile Defense Agency
  5. Hybrid Framework for Information Visualization Enablers (HI-FIVE)

    SBC: KNOWLEDGE BASED SYSTEMS, INC.            Topic: MDA05054

    This project will research, design, and demonstrate a Hybrid Framework for Information Visualization Enablers (HI-FIVE). We propose a novel, model-based “no-programming required” approach that leverages the proven IDEF family of methods, on Web-services, and a proven data display format called Data Display Markup Language (DDML). HI-FIVE provides an extendible framework for rapidly developing, ...

    SBIR Phase II 2007 Department of DefenseMissile Defense Agency
  6. Radiation Hard Electronic Components: Multiple 180nm RH circuits and TCV’s via Texas Instruments for incorporation by Rockwell Collins

    SBC: Silicon Space Technology Corporation            Topic: MDA05029

    Communication systems being developed for tactical space and missile defense applications must include radiation hardness as a reliability requirement. These systems will use software-defined modems and programmable encryption circuits based on high-performance integrated circuits. But with the required increases in density, performance and complexity of integrated circuits, also comes increased ...

    SBIR Phase II 2007 Department of DefenseMissile Defense Agency
  7. Ferroelectric Capacitors for Pulse Power Electronics

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    HIGH-DENSITY ENERGY STORAGE AND FAST DISCHARGE WILL BE CRITICAL IN A VARIETY OF HIGH POWER AEROSPACE APPLICATIONS. CAPACITORS ARE IDEAL FOR THESE PURPOSES, AS WELL AS FOR POWER CONDITIONING AND FILTERING. UNFORTUNATELY, BULK POWDER-BASED DIELECTRICS USED IN CAPACITORS HAVE SEVERE LIMITATIONS, ESPECIALLY THE HIGH NUMBER OF SHORT-INDUCING DEFECTS CAUSED BY POOR CONTROL OF MATERIAL PROPERTIES IN CERA ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  8. Multiple Rectangular Discharge CO2 Laser

    SBC: Qsource, Inc.            Topic: N/A

    An innovative discharge geometry for a very compact, area cooled, high average power CO2 laser employing a two mirror, waveguide-stable optical cavity is proposed. The specific Phase I result sought is the generation of an average CO2 output power of 1 W/cm2 of wall cooling area in a geometry that has a total cooling area of 140 cm2. A lightweight CO2 amplifier version of a future Phase II devic ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government