Award Data

Nanohmics proposes to develop a hyperspectral imager for aft-looking sensing of phenomenology associated with target vehicles.The payload is designed to operate with existing components and has no moving parts.The high spectral resolution will provide feedback for signature models and the spatial resolution will allow the spectral signatures to be associated with specific phenomena.Approved for Pu ...

Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

High-fidelity trajectory propagators are fundamental to the simulation and analysis of launch vehicles, missiles, and satellites. Applications in fields ranging from missile threat analysis to flightpath optimization seek fast and accurate solutions to large numbers of trajectories in federated simulation environments. Due to their robustness, well-known properties, and straightforward implementat ...

The Missile Defense Agency (MDA) has a need for weight-optimized solutions for future platforms of large missile structures. A significant weight reduction on these MDA platforms could increase maneuverability of the payload and allow the missile to launch additional kill vehicles. High temperature composite materials offer the means by which low cost and lighter weight missile structures can be a ...

Presently the missile defense systems are using a reactive and program-centric framework for assessing industrial base risk. The Phase I effort focused on developing a wide and deep network algorithm using Industrial Product-Support Vendor (IPV) Gen II program for predicting the probability of failure. The proposed Phase II effort leverages the Phase I work and will focus on three main goals:(1) I ...

Explosions and high-velocity impacts can create strain rates on the order of 105 to 107 s-1. To simulate these events, first-principles codes require material models that are valid at these loading rates. Currently, the amount of test data, material models and material constants for this strain rate range is extremely limited, and an innovative and cost-effective laboratory test procedure is neede ...

Missile-to-missile high speed communication can greatly enhance the operational effectiveness of the Ballistic Missile Defense System (BMDS) of the United States.Currently, information from the first interceptor is sent to the launch control and then from the launch control to the second interceptor. The round-trip signal latency decreases the likelihood of successful interception. The approach pr ...

Nanohmics proposes to develop a novel high-G-capable chip-scale accelerometer based on modern MEMS developments.The system is designed to be robust against electromagnetic interference and will demonstrate an innovative approach for advanced accelerometer technology that enhances future Inertial Measurement Units (IMUs) high-g operability and survivability.The Phase I program will culminate in a h ...

Lynntech will determine the feasibility of several scaled-up rocket engine configurations to use AF-M315E as a monopropellant which will result in a preliminary design of a subsystem for air launch/air transportable liquid upper stage engines. Four technologies will be investigated for their effect on increasing the thrust and specific impulse of commercial rocket engines, resulting in a new subsy ...

The proposed project aims to pursue an innovative approach of utilizing deep learning algorithms to improve the performance of state-of-the-art MEMS Inertial Measurement Units (IMUs) to push their performance to fullest extent possible as replacements for existing Fiber Optic Gyroscopes (FOG) systems for navigation and guidance in future missile system avionics including Sounding Rockets. During P ...