You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of Novel RAD-Hard ASICs and a Modular Design Methodology Using Asynchronous Architectures

    SBC: NANOMATRONIX LLC            Topic: MDA18007

    The NMT/UA team propose to develop a radiation-hardened, low power, and highly robust delay-insensitive asynchronous circuit design methodology in 90nm technology, prototyped by designing a SET/SEL/SEU immune asynchronous microcontroller test chip (PIC 16C57, for example).The proposed Phase 1 SBIR effort will focus on design, simulation, prototyping and demonstration of the key functional blocks o ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  2. Structural Reactive Polymeric Materials

    SBC: TETRAMER TECHNOLOGIES LLC            Topic: MDA15004

    Missiles produced with reactive materials can add chemical energy to the kinetic energy generated on impact with a target. Thus, reactive materials have potential to serve as structural components resulting in possible increase lethality without a weight impact. In Phase I, Tetramer will demonstrate a new material system with significantly stronger mechanical properties and excellent reactive prop ...

    SBIR Phase I 2016 Department of DefenseMissile Defense Agency
  3. Water-washout tooling for improved high- to very-high-temperature manufacturing of SM-3 TSRM composite motor cases

    SBC: NEVADA COMPOSITES INC            Topic: MDA14002

    Nevada Composites has developed Green-AeroSM tooling, lightweight ceramic tooling that is stable under high pressure and long-duration cure cycles and can be washed out with water after cures to the highest resin-matrix-composite cure temperatures. The proposed Phase II program would build on the successful work in Phase I toward creation of a washout mandrel for the upper stage rocket motor of a ...

    SBIR Phase II 2016 Department of DefenseMissile Defense Agency
  4. Development of an Active Vibration Supression System (AVSS) Using Combined Curved Flextensional and Shear Actuation

    SBC: APPLIED THERMAL SCIENCES            Topic: N/A

    "The objective of this proposal is to demonstrate and evalulate the use of a Smart Monotoring Active Control System for Seeker-Platform Vibration Suppression designed for use in the Atmospheric Interceptor Technology (AIT) Kill Vehicle. This system isintended to afford a structural attachment interface between the seeker and the AIT forebody substructure. Advanced composite structures, employing ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  5. Low Cost Lightweight Hot Gas Valve/Nozzle for Divert and Axial Thrusters

    SBC: APPLIED THERMAL SCIENCES            Topic: N/A

    "A unique hot gas valve/nozzle concept promises low cost and lightweight for divert and axial thrusters. Key requirements for divert and attitude control (DAC) systems on kinetic kill vehicles (KVV's) are lightweight, low volume and cost, high impulse withminimal power requirements. Current hot gas valves for DAC's employ exotic materials such as rhenium to prevent ablation and erosion that seve ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  6. A new THz-to-millimeter-wave source

    SBC: ArkLight            Topic: N/A

    "This SBIR Phase I project focuses on the implementation of a new THz module that can emit coherent and tunable THz waves. Recently, coherent THz radiation was generated at room temperature by PI, with a tuning range of 56.8-1618 ¿m (5.27 - 0.18 THz), inGaSe based on difference-frequency generation. The peak THz power can be as high as 69.4 W at 196 ¿m. The corresponding photon conversion effici ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  7. Ballistic Missile Tracking and Detection with Plasma Antenna

    SBC: ASI TECHNOLOGY CORP.            Topic: N/A

    "Through theoretical analysis and experimental testing ASI is ascertaining the suitability of using gas plasma for a high-powered, reconfigurable antenna operating in both the S and X-bands of the electromagnetic spectrum. This design would be used todetect and track ballistic missile. We believe this design will allow development of multifunctional, multi-spectral plasma array antennas capable ...

    SBIR Phase II 2002 Department of DefenseMissile Defense Agency
  8. Radar & MMW-Tunable Plasma Frequency Selective Surfaces for Shielding Radar Systems

    SBC: ASI TECHNOLOGY CORP.            Topic: N/A

    "The performance of any radar, antenna, or electronic system depends on its ability to project and defend itself against various forms of electromagnetic interference including frequencies in the S and X band. Our proposal is to design a plasma barrier andtunable frequency selective surfaces that can be turned on and off on demand to shield antennas, radar, or electronic equipment. Metallic freque ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  9. Development of an Isotropic Etching Method of Surface Preparation of SiC

    SBC: BANDGAP TECHNOLOGIES, INC.            Topic: N/A

    "This Phase I SBIR program is aimed at demonstrating the principle of an approach for the surface preparation of SiC wafers comparable or superior to chemo-mechanical polishing. In the Phase I program, surface preparation of 4H-SiC wafers 50 mm (2 inches)in diameter will be demonstrated. Also in Phase I, the prepared (treated) surface of the SiC wafer will be characterized for average surface ro ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  10. An Approach for the Growth of Long Silicon Carbide Boules

    SBC: BANDGAP TECHNOLOGIES, INC.            Topic: N/A

    "This Phase I program is aimed at demonstrating the principle of an approach for the growth of 4H-SiC boules 50 mm in diameter but of length equal to 50 mm, which is approximately twice the length of boules grown by convential approaches. Also in Phase I,the grown boules will be sliced into wafers, lapped, and polished; the polished wafers will be characterized for structural properties; comparis ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government