You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Development of Novel RAD-Hard ASICs and a Modular Design Methodology Using Asynchronous Architectures

    SBC: NANOMATRONIX LLC            Topic: MDA18007

    The NMT/UA team propose to develop a radiation-hardened, low power, and highly robust delay-insensitive asynchronous circuit design methodology in 90nm technology, prototyped by designing a SET/SEL/SEU immune asynchronous microcontroller test chip (PIC 16C57, for example).The proposed Phase 1 SBIR effort will focus on design, simulation, prototyping and demonstration of the key functional blocks o ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  3. Structural Reactive Polymeric Materials

    SBC: TETRAMER TECHNOLOGIES LLC            Topic: MDA15004

    Missiles produced with reactive materials can add chemical energy to the kinetic energy generated on impact with a target. Thus, reactive materials have potential to serve as structural components resulting in possible increase lethality without a weight impact. In Phase I, Tetramer will demonstrate a new material system with significantly stronger mechanical properties and excellent reactive prop ...

    SBIR Phase I 2016 Department of DefenseMissile Defense Agency
  4. Manufacturing Design of Bio-based Ceiling Tiles using Nanocellulose

    SBC: REVOLUTION RESEARCH, INC.            Topic: 15NCER06

    Suspended ceiling tiles are widely used in commercial and residential construction because they offer flexibility and easy access to utilities. Most of the available tiles absorb water, resulting in sagging, staining, and mold/mildew growth. They also contain potentially hazardous chemicals and release airborne fibers when broken or cut. Existing tiles are not durable, requiring frequent replaceme ...

    SBIR Phase I 2016 Environmental Protection Agency
  5. Ferroelectric Capacitors for Pulse Power Electronics

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    HIGH-DENSITY ENERGY STORAGE AND FAST DISCHARGE WILL BE CRITICAL IN A VARIETY OF HIGH POWER AEROSPACE APPLICATIONS. CAPACITORS ARE IDEAL FOR THESE PURPOSES, AS WELL AS FOR POWER CONDITIONING AND FILTERING. UNFORTUNATELY, BULK POWDER-BASED DIELECTRICS USED IN CAPACITORS HAVE SEVERE LIMITATIONS, ESPECIALLY THE HIGH NUMBER OF SHORT-INDUCING DEFECTS CAUSED BY POOR CONTROL OF MATERIAL PROPERTIES IN CERA ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  6. Blue-Green LED Arrays for Scanned Linear Array Imaging

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Virtual displays have tremendous potential in defense applications such as virtual reality training, battlefield support, and information systems. Full color displays require red, blue, and green LED arrays of which only red is commercially available. This program teams ATMI, a recognized leader in the GaN growth community, with Reflection Technology, a leader in virtual display technology. ATMI w ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. High Dielectric MOSFET Oxides on SiC

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Increasing thermal and power loads in circuitry demand electrical components which can operate at temperatures up to 400 C and beyond . A combination of high bandgap semiconductors and improved dielectrics is needed to solve this problem. ATMI has maj or programs in production of both SiC/GaN semiconductor materials and high dielectric constant complex oxide thin films, in particular barium stront ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. Edge-emitting Nitride-based Bragg Reflector Lasers

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    In this program we will develop narrow linewidth AlGaN Bragg reflector lasers suitable as injection seeds for solid-state W lasers in the range of 280 to 330 nm. These systems are compact, light weight, and low-power consuming and ideal for airborne lidar systems. Bragg reflector lasers have never been fabricated in the nitrides so in this Phase I program we will develop the technologies necessary ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Solar-blind GaN p-I-n UV Photodiodes

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Photodiodes have high efficiency since the absorption region thickness is large. However, no GaN p-i-n photodiodes have been reported due to the difficulty in achieving low background doped GaN. This Phase I program seeks to determine the increase in quantum efficiency achievable by the use of a thick intrinsic layer inserted in the p-n junction to increase the absorption region thickness. In addi ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Epi-ready SiC Substrates

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Commercially viable silicon carbide device manufacturing processes depend on an ability to grow'low defect density epitaxial layers. Low defect density epitaxial layers start with pristine SiC substrate surfaces. Epi-ready pristine SiC surfaces are not commercially available. The results of this-programme should remedy this. In Phase I we will demonstrate a cost-effective, reproducible ex-situ sur ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government