You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. VOICE ACTIVATED GUN TURRENT CONTROL

    SBC: Aptec Inc            Topic: N/A

    TO DEFINE, DESIGN, AND BUILD PROTOTYPE HARDWARE AND SOFTWARE TO ENABLE A PILOT OR GUNNER TO USE HUMAN VOICE TO RECEIVE AUTOMATIC STATUS REPORTS, GIVE COMMANDS TO, AND QUERY ARMAMENT, AIRCRAFT, AND FLIGHT INSTRUMENT FUNCTIONS. HARDWARE WILL BE CONSTRUCTED ON A MODULAR BASIS CONSISTING OF A SPEECH OUTPUT ADVISOR AND A LOW MEMORY REQUIREMENT (LMR) VOICE/UTTERANCE RECOGNIZER. THE LMR VOICE/UTTERANCERE ...

    SBIR Phase I 1987 Department of DefenseArmy
  2. THERMOPHILIC MICROORGANISMS AS SOURCE OF HEAT STABLE OXIDASE AND PEROXIDASE

    SBC: J.k. Research            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
  3. QUANTIFICATION AND MEASUREMENT OF VISUAL BIREFLECTANCE DISTRIBUTION FOR DECOYS

    SBC: Lighting Sciences Inc.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
  4. Portable High Resolution Doppler Lidar

    SBC: LITE CYCLES, INC.            Topic: N/A

    The Phase I effort will define an optimized, portable, rugged, incoherent, eye-safe Doppler lidar system for use in detecting wind velocity above helicopters at ranges greater than 5 km. Initial system design and component specifications will be completedin this effort.Lite Cycles, Inc. intends to commercialize this technology within both the DoD and the private sector. There are three primary p ...

    SBIR Phase I 2001 Department of DefenseArmy
  5. Fundamental Studies of Self-Induced Waveguides in the Atmosphere at Various Wavelengths and Pulse Durations

    SBC: LITE CYCLES, INC.            Topic: N/A

    We propose a fundamental study of filamentation in air that will combine the theoretical expertise at the University of Arizona in simulating these nonlinear phenomena, the experimental facilities at the University of New Mexico in ultrafast diagnostics,and the experience at Lite Cycles, Inc. in the design and construction of high-power, short-pulse lasers. In Phase I of this program, we will mak ...

    STTR Phase I 2001 Department of DefenseArmy
  6. A COMPOSITE CERAMIC MATERIAL FOR LOW HEAT REJECTION DIESEL ENGINES

    SBC: ATS-MER, LLC            Topic: N/A

    CERAMICS HAVE BEEN DEMONSTRATED TO BE VIABLE ALTERNATIVES IN CONVENTIONAL AND ADIABATIC DIESEL ENGINES WITH THE POTENTIAL OF 30% FUEL SAVINGS. THERE IS AN INTERNATIONAL COMPETITION TO DEVELOP CERAMICS IN GENERAL AND SPECIFICALLY FOR DIESEL ENGINES. IN AMBITIOUS DOMESTIC AND FOREIGN PROGRAMS TO UTILIZE CERAMICS IN DIESELS, THE LIMITATION OF CURRENTLY AVAILABLE CERAMICS HAVE BEEN IDENTIFIED. IN META ...

    SBIR Phase I 1987 Department of DefenseArmy
  7. ADVANCED COMPOSITE MATERIALS FOR LIGHTWEIGHT ROTOCRAFT/AIR-VEHICLE SYSTEM COMPONENTS

    SBC: ATS-MER, LLC            Topic: N/A

    CHRONIC NEEDS FOR HIGHER PERFORMANCE IN PRESENT AND FUTURE ARMY ROTOCRAFT/AIR-VEHICLE SYSTEMS MANDATE IMPROVEMENTS IN MATERIALS PROPERTIES. LIGHTWEIGHT METAL MATRIX COMPOSITES (MMC) INCLUDING MAGNESIUM AND ALUMINUM ARE AMONG THE BEST CANDIDATES TO FULFILL THE REQUIREMENTS THAT ENABLE LIGHTWEIGHT STRUCTURES, ADVANCED PROPULSION, TRANSMISSIONS, ROTORS, THRUST DEVICES, ETC. A UNIQUE COATINGS APPROACH ...

    SBIR Phase I 1991 Department of DefenseArmy
  8. New Advanced Gasar-Materials for Light Tactical Vehicle Brake Components

    SBC: ATS-MER, LLC            Topic: N/A

    A novel approach for the development of high performance brake components isproposed based on gasar technology. The approach involves filling of highly porous gasar matrices made of wear-resistance alloys with abrasive powder to create new bake components.Gasar technology provides the capabilities to control pores sizes, shape, quantity, and orientation in one-step process. The porous monolithic s ...

    SBIR Phase I 2001 Department of DefenseArmy
  9. A Continuous Reactor for the Large Scale Production Of Nanotubes

    SBC: ATS-MER, LLC            Topic: N/A

    It is proposed to development of a large-scale production apparatus that produces single-walled carbon nanotubes (SWNT) and catalytic multi-walled nanotubes (MWNT) on a continuous process basis. A novel and flexible reactor design will be investigated. Theproposed reactor design will allow the control of production parameters including catalyst type and particle size, the type of carbon source, ca ...

    SBIR Phase I 2001 Department of DefenseArmy
  10. Multifunctional Carbon, SiC and Polymer Textile Fibers Reinforced with Nanotubes for Enhanced Performance

    SBC: ATS-MER, LLC            Topic: N/A

    Due to poor nanotube-matrix interactions, the exemplary properties of carbon nanotubes have yet to be realized in composite applications. Fiber architectures offer promise for allowing integration and alignment of the nanotube into the matrix, yielding acomposite fiber that fully realizes the extraordinary mechanical, thermal and electrical properties of the nanotube reinforcement. High purity s ...

    SBIR Phase I 2001 Department of DefenseArmy
US Flag An Official Website of the United States Government