You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. IN-SITU TEST DEVICE TO DETERMINE LATERAL EARTH PRESSURE

    SBC: Geo-systems Engineering Inc.            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of DefenseArmy
  2. THE DESIGN AND FABRICATION OF HYBRID CIRCUIT POWER SWITCHES INCLUDING DRIVE AND PROTECTION NETWORKS

    SBC: Ice Corp.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
  3. THERMOPHILIC MICROORGANISMS AS SOURCE OF HEAT STABLE OXIDASE AND PEROXIDASE

    SBC: J.k. Research            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
  4. POTENTIAL MICROPHONE MANUFACTURERS FOR NBC PROTECTIVE MASK

    SBC: New Eagle Communications Gp In            Topic: N/A

    THIS EXPLORATORY DEVELOPMENT'S GOAL IS TO PINPOINT SOURCES AND MANUFACTURERS OF STATE-OF-THE-ART MICROPHONE TO BE USED IN THE U.S. ARMY NBC PROTECTIVE MASK BY COMPLETING THE FOLLOWING OBJECTIVES: 1) NEEDS ASSESSMENT: 1. END USER, 2. DESIGNERS, 3. MATERIALS. 2) RESEARCH FOR ADVANCED TECHNOLOGY MICROPHONES. 3) IDENTIFICATION OF ALL POTENTIAL MICROPHONES FOR NBC PROTECTIVE MASKS INCLUDING: 1. DISCOVE ...

    SBIR Phase I 1991 Department of DefenseArmy
  5. LOW COST HIGH PERFORMANCE CONTINUOUS FIBER CERAMIC COMPOSITES: 3-D BRAIDED PREFORMS AS SIC MATRIX COMPOSITES USING CVI

    SBC: Quadrax Advanced Materials            Topic: N/A

    3-D BRAIDED PREFORMS SHOULD INCREASE MECHANICAL PROPERTIES OF CERAMIC COMPOSITES IN ALL DIRECTIONS; ITS INTERLOCKING FIBER ARCHITECTURE SHOULD BE EFFECTIVE IN ARRESTING CRACKS, AND REMOVING CATASTROPIC FAILURE. THIS PROJECT ADDRESSES THE ISUES OF MERGING AN EFFECTIVE REINFORCEMENT SYSTEM WITH AN INEXPENSIVE CERAMIC MATRIX PROCESSING TECHNOLOGY TO DISCOVER A LOW COST MANUFACTURING ROUTE TO HIGH PER ...

    SBIR Phase I 1991 Department of DefenseArmy
  6. Extreme-Temperature Multi-Use Engine Oils

    SBC: SURFACES RESEARCH & APPLICATIONS, INCO            Topic: N/A

    The objective of this program is to develop an extreme-temperature lubricant for the U.S. Army Future Combat System (FCS) propulsion system. The system will operate at significantly higher temperatures for longer durations than today's prototype low heatrejection (LHR) diesel engines. The lubricant will be used as the engine oil, cooling fluid, and transmission fluid.Surfaces Research has recently ...

    SBIR Phase I 2001 Department of DefenseArmy
  7. MODEL FOR PORT SCATTER FROM LASERS

    SBC: Toomay Mathis & Associates Inc            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
  8. Bioengineered Proteins for Chemical/Biological Defense, Protection, and Decontamination

    SBC: Transwesttech            Topic: N/A

    This proposal encompasses a facile method for generating transgenic chickens. Traditionally, the approach to accomplish this has been to target the avian egg or embryo for gene insertion using either viral or 'standard' plasmids as vectors. In contrast,our proposed method introduces two new features, i.e. (1) novel transposon DNA vectors and (2) injection of DNA into the testes of immature males. ...

    STTR Phase I 2001 Department of DefenseArmy
  9. Development of Low Temperature Ultracapacitor

    SBC: Yardney Technical Products, Inc.            Topic: A12aT010

    The objective of this Phase 1 effort is to develop an asymmetric supercapacitor (ASC) that provides>10 Wh/kg energy density and a high power density, and maintains this performance down to -55 degrees C. Yardney Technical Products (YTP), a recognized specialty high energy battery manufacturer in Pawcatuck, CT in collaboration with the Jet Propulsion Laboratory (JPL) proposes to design, develop and ...

    STTR Phase I 2012 Department of DefenseArmy
  10. Improved Mobile User Objective System (MUOS) Metaferrite Based Antenna for SATCOM

    SBC: MINERVA SYSTEMS & TECHNOLOGIES LLC            Topic: A12045

    The objective of this proposal is to design and develop UHF Satellite communications (SATCOM) circular polarized antennas using advanced metamaterials to achieve high gain performance with smaller dimensions (i.e., size and weight). The metamaterials we propose belong to a class of magneto-dielectric materials. The advantages and disadvantages of dielectric loading applied to electromagnetic devi ...

    SBIR Phase I 2012 Department of DefenseArmy
US Flag An Official Website of the United States Government