You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. THERMOPHILIC MICROORGANISMS AS SOURCE OF HEAT STABLE OXIDASE AND PEROXIDASE

    SBC: J.k. Research            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
  2. Compact, Lightweight, Low-Cost, Permanently-Aligned Infrared Spectrometers

    SBC: MANNING APPLIED TECHNOLOGY            Topic: N/A

    Military, government and civilian personnel need timely and cost-effective warning of chemical and biological hazards in many arenas.Timely warning allows for effective personnel protection. ManningApplied Technology proposes to construct a novel Fouriertransform-infrared spectrometer which is modular, compact, costs less than $5000in quantity, and is optically tilt-compensated. The proposed des ...

    SBIR Phase I 2001 Department of DefenseArmy
  3. LOW COST HIGH PERFORMANCE CONTINUOUS FIBER CERAMIC COMPOSITES: 3-D BRAIDED PREFORMS AS SIC MATRIX COMPOSITES USING CVI

    SBC: Quadrax Advanced Materials            Topic: N/A

    3-D BRAIDED PREFORMS SHOULD INCREASE MECHANICAL PROPERTIES OF CERAMIC COMPOSITES IN ALL DIRECTIONS; ITS INTERLOCKING FIBER ARCHITECTURE SHOULD BE EFFECTIVE IN ARRESTING CRACKS, AND REMOVING CATASTROPIC FAILURE. THIS PROJECT ADDRESSES THE ISUES OF MERGING AN EFFECTIVE REINFORCEMENT SYSTEM WITH AN INEXPENSIVE CERAMIC MATRIX PROCESSING TECHNOLOGY TO DISCOVER A LOW COST MANUFACTURING ROUTE TO HIGH PER ...

    SBIR Phase I 1991 Department of DefenseArmy
  4. Wet-Vacuum Sampler For Surface Biocontamination Detection

    SBC: ROCKY MOUNTAIN RESOURCE LABS, INC.            Topic: N/A

    In response to possible biological warfare (BW) attack, accurate sample acquisition and rapid detection of point microbial contamination on military equipment, housing and supplies is required for personnel safety and early response strategies. A novelhand-held, wet-vacuum sampling unit (VSU) is proposed, which will allow application of sterile rinse solutions onto diverse material surfaces or te ...

    SBIR Phase I 2001 Department of DefenseArmy
  5. MODEL FOR PORT SCATTER FROM LASERS

    SBC: Toomay Mathis & Associates Inc            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
  6. Bioengineered Proteins for Chemical/Biological Defense, Protection, and Decontamination

    SBC: Transwesttech            Topic: N/A

    This proposal encompasses a facile method for generating transgenic chickens. Traditionally, the approach to accomplish this has been to target the avian egg or embryo for gene insertion using either viral or 'standard' plasmids as vectors. In contrast,our proposed method introduces two new features, i.e. (1) novel transposon DNA vectors and (2) injection of DNA into the testes of immature males. ...

    STTR Phase I 2001 Department of DefenseArmy
  7. Lithium Ion / Super Capacitor Hybrid System

    SBC: Electro Standards Laboratory, Inc.            Topic: A15AT010

    A hybrid lithium ion battery / super capacitor energy storage device is developed that uses the high power capability of the super capacitor to satisfy pulsed power load requirements such that stress on the lithium ion batteries is reduced. This results in extended discharge time and higher efficiency utilization of the battery stack.

    STTR Phase I 2015 Department of DefenseArmy
  8. Reduced Drag Connector for Hellfire Missile

    SBC: Stutz Applied Technology, Inc.            Topic: A14068

    This proposal is for research into various configurations to reduce or eliminate the drag and resulting lateral loading that result from the shotgun connector and evaluate the potential overall weapon system improvement by simulating the trajectory of the improved system. Three configurations will be studied by computational fluid dynamics to estimate aerodynamic properties and utilized to simulat ...

    SBIR Phase I 2015 Department of DefenseArmy
US Flag An Official Website of the United States Government