You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Comprehensive Sky Compass

    SBC: Lynntech Inc.            Topic: A16128

    All DoD branches benefit from interoperable, robust, and accurate targeting systems for forward observers and terminal attack controllers. These systems allow personnel to report relative distance in terms of three measures: observer current position (for example from reading a map or global navigation satellite systems, whose signal is subject to jamming), distance to target (by laser measurement ...

    SBIR Phase I 2017 Department of DefenseArmy
  2. Long-life, Shelf-stable, Wet Layup Laminating Resins and Paste Adhesives

    SBC: Texas Research Institute, Austin, Inc.            Topic: A17005

    Current field level composite repair techniques for aircraft use thermally accelerated vacuum bagging and bonding to restore the original design strength of the composite laminate. The matrix resins used have limited shelf-life, and the multi-step process is labor-intensive. To overcome these challenges TRI/Austin will leverage recently developed laminating resins to develop new composite repair s ...

    SBIR Phase I 2017 Department of DefenseArmy
  3. 3D Food Printing Control System

    SBC: BeeHex Inc            Topic: A17078

    Army Soldiers currently consume pre-packaged Meals Ready to Eat (MRE), which are inadequate in providing sufficient nutrition for the level of physical activity they routinely perform. These MREs have limited choices; shorter shelf life and they’re not tailored to individual’s needs. BeeHex proposes to use a 3D food printer system capable of dispensing variety of macro- and micro-nutrients (in ...

    SBIR Phase I 2017 Department of DefenseArmy
  4. Comprehensive Chemical, Biological, and Explosives Indicator Ticket Platform for Rapid Field Identification of Threats

    SBC: Lynntech Inc.            Topic: A17063

    Military combatants face the threat of unconventional radiological, biological and chemical agents. Current and future operational theaters present a constantly-expanding set of potential threats that pose a hazard to operations, to include various types of chemical warfare agents and chemistries, biological materials, and energetic/explosive compounds. The U.S. Army has taken the lead towards sti ...

    SBIR Phase I 2017 Department of DefenseArmy
  5. Templated Synthesis of Boron Suboxide

    SBC: Lynntech Inc.            Topic: A16124

    The US Army desires the development of a synthetic procedure which will afford phase-pure boron suboxide (B6O). Lynntech proposed a template synthesis scheme which combines pre-formed chemical moieties to generate the desired extended lattice structure. Lynntechs approach avoids potential pitfalls with regards to the single-atom substitutional disorder within the produced lattice.Lynntech and its ...

    SBIR Phase I 2017 Department of DefenseArmy
  6. Inspection System for Body and Vehicle Ballistic Armor

    SBC: Texas Research Institute, Austin, Inc.            Topic: A17035

    In Phase I we will model, analyze, and optimize our existing non-ionizng, low power imaging technology for armor.We will demonstrate a breadboard microwave/millimeter wave NDI system that behaves like a video camerabut which creates 3D images of the interior of multi-layer dielectric materials.We will use flat and curved vehicle and body armor samples up to 2 thickness and show ability to inspect ...

    SBIR Phase I 2017 Department of DefenseArmy
  7. Vascularized Tissue Construction Using Specialized 3D Bioprinting Techniques

    SBC: Lynntech Inc.            Topic: A17068

    Tissue engineering technology is of particular import to the Army for the matter of producing tissue replacements for the repair and regeneration of various organ systems (liver, heart, muscle, lung, etc.) for wounded patients. Unfortunately, the production of masses of tissue with thicknesses greater than ~1 mm presents a challenge due to diffusion limits of nutrients into the tissue and waste ou ...

    SBIR Phase I 2017 Department of DefenseArmy
  8. Mega-City Analysis and Visualization Environment (M-CAVE)

    SBC: KNOWLEDGE BASED SYSTEMS, INC.            Topic: A17036

    Knowledge-Based Systems Incorporated (KBSI) proposes Mega-City Analysis and Visualization Environment (M-CAVE) in response to the Army SBIR Civil Affairs Information and Military Sustainment in the Megacity Environment (topic number A17-036). We propose to conduct a feasibility study, including technical demonstrations, of a mega-city common operating picture (COP) focused on the unique features o ...

    SBIR Phase I 2017 Department of DefenseArmy
  9. Variable Displacement Piston Energy Recovery Device for Seawater RO

    SBC: Lynntech Inc.            Topic: A17089

    Seawater Reverse Osmosis (SWRO) for production of freshwater requires high pressures and flow rates of feed water, leading to high energy consumption.Energy recovery from the brine waste stream has potential to give SWRO an advantage as a source of drinking water, when compared to the logistical costs and increased risks for convoys trucking bottled water to small units where freshwater is not ava ...

    SBIR Phase I 2017 Department of DefenseArmy
  10. High Efficiency Torque Multiplication for Military Ground Vehicle Transmissions

    SBC: Orbital Traction, Ltd.            Topic: A17112

    Orbital Traction proposes to demonstrate, through research and modeling, the fuel efficiency and performance gains achievable on military vehicles through optimization of the driveline using an innovative torque multiplication technology. This system replaces the existing torque converter, thereby addressing energy inefficiency within the driveline in ground vehicle transmissions. The reduction in ...

    SBIR Phase I 2017 Department of DefenseArmy
US Flag An Official Website of the United States Government