List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Toward Value-Added Productivity Analysis and Reporting

    SBC: STATPOINT, LLC.            Topic: N/A

    N/A

    SBIR Phase I 2002 Department of Education
  2. Innovative Inertial Navigation System for Large Caliber Indirect Fire Artillery

    SBC: Artech Assoc.            Topic: N/A

    "The proposed research effort is to complete a (concept) design for a durable, lightweight, compact, MEMS inertial measurement unit (IMU) for use with mortars and lightweight artillery. The systems in use at this time are too heavy and too large, whichmakes them very difficult to adapt to this (extremely high) shock environment (potentially > 15000 G's). The proposed design will not only use thi ...

    SBIR Phase I 2002 Department of DefenseArmy
  3. Learning-Based Source Separation Methodologies Applicable to the Multiple Target Problem

    SBC: Coprime            Topic: N/A

    "Coprime proposes to investigate the applicability of learning-based source separation methodologies to the problem of multiple targets in a complex acoustic environment. The Phase I effort will focus on identifying viable learning-based source separationalgorithms specifically tuned to the multiple combat vehicle scenario. A prototype architecture will be developed and numerical software rapidly ...

    SBIR Phase I 2002 Department of DefenseArmy
  4. Advanced Lightweight, High Capacity Airborne Cargo Handling Winch System

    SBC: FAUNCE ENGINEERING            Topic: N/A

    "We propose to design an innovative modular heavy lift system readily configured and optimized for aircraft/mission requirements. The dual winch system will be capable of lifting up to 22 ton of cargo at 60 ft/min, and stabilize the load for flight. Wewill identify all possible configurations and evaluate the risks and tradeoffs of each configuration. We will define a preliminary design for a m ...

    SBIR Phase I 2002 Department of DefenseArmy
  5. A Lightweight mm-Wave SAR/MTI Sensor for Small Unit UAV

    SBC: IMAGING MICROSENSORS, INC.            Topic: N/A

    "A lightweight mm-wave SAR/MTI sensor of small size and low power is proposed for small UAVs such as those being developed under the US Army/DARPA FCS OAV Program, or those anticipated in response to the Small Unit UAV ORD. The sensor is based on aninnovative radar configuration made possible by the advanced data-adaptive motion compensation techniques developed by Imaging Microsensors Inc. The pr ...

    SBIR Phase I 2002 Department of DefenseArmy
  6. Next Generation Software for Efficient Remote Parallel Visualization of Large-Scale Time-Dependent CFD Data

    SBC: JMSI INC.            Topic: N/A

    "The objective of this proposal is to develop easy to use, fast and efficient next generation visualization techniques that utilize client-server architecture, parallel processors and domain knowledge for the analysis and post-processing of large-scale,time dependent, rotorcraft, computational fluid dynamics (CFD) data sets. Large-scale, time-dependent 3D simulations of complex configurations usin ...

    SBIR Phase I 2002 Department of DefenseArmy
  7. Fiber Optic Dynamic Strain Sensors for Seismic Monitoring

    SBC: L. C. PEGASUS CORP.            Topic: N/A

    "This project is focus on the development of a new technology for seismic sensors that are very small, highly sensitive and immune to electromagnetic interference (EMI), along with a sophisticated computer based real time data acquisition, processing andanalysis system. The detection system is based on optical fiber Bragg grating sensors for dynamic strain and acoustic emissions. In phase I of thi ...

    SBIR Phase I 2002 Department of DefenseArmy
  8. Cased Telescoped Ammunition Smart Seal Development

    SBC: MECHANICAL SOLUTIONS, INCORPORATED            Topic: N/A

    "Cased Telescoped Ammunition (CTA) has the potential to allow use of lighter ammunition-feed swing chambers, and more efficient ammunition storage, which will move the Army toward the lighter vehicles required by the Future Combat Systems (FCS) program.Technical obstacles have blocked the widespread application of CTA, particularly the sealing of propellant gases at the fore and aft of the cartrid ...

    SBIR Phase I 2002 Department of DefenseArmy
  9. A New High Rate Process for Nanoparticle Separation

    SBC: NEI CORPORATION            Topic: N/A

    "We propose to develop a new high rate process for sorting nanoparticles in the gas phase. The process also overcomes the fundamental limitation of the existing differential mobility analyzer, thereby allowing an output that is conducive to industrial use.The nanoparticle separator can be used either as a stand-alone system, or in conjunction with a nanoparticle generating reactor, such as a plasm ...

    SBIR Phase I 2002 Department of DefenseArmy
  10. Innovative Conformal Power Sources for Advanced Smart Munitions

    SBC: OMNITEK PARTNERS LLC            Topic: N/A

    The objective of this project is to study the feasibility of a number of novel methods and concepts for conformable power sources that can be integrated into the structure of the projectile with minimal or no loss of the intended functionality of thestructure. The structurally integrated power sources are load bearing. As the result, all or a significant portion of the space required to house the ...

    SBIR Phase I 2002 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government