You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Pulse Current Assisted Heat Treatment for Impeller Disks

    SBC: ATS-MER, LLC            Topic: A10147

    Advanced turboshaft engine impeller disks work at a high rotational speed at elevated temperatures which vary from the disk rim to its bore. Due to contact with combustion gases, the rim possesses a significantly greater temperature than the bore. This temperature gradient implies different requirements for the mechanical properties of the material in the rim and bore areas. A nickel based superal ...

    SBIR Phase I 2010 Department of DefenseArmy
  2. Field Programmable Gate Array (FPGA) Physical Unclonable Functions

    SBC: NVE CORP. (FORMERLY NONVOLATILE ELECTRONICS, INC.            Topic: OSD10A02

    Randomness is required for a variety of computational, statistical, testing, and security related applications. Of particular interest are future commercial high-speed encryption applications, such as high-speed cryptographic key exchange for quantum cryptography. This encryption technology is expected to be coming to market in the near future, and there are currently no commercially available t ...

    SBIR Phase I 2010 Department of DefenseArmy
  3. Bedlam OCU™: Adversarial Reasoning System for Unmanned Platforms

    SBC: Primordial, Inc.            Topic: A10091

    Primordial, Carnegie Mellon University, iRobot, and AeroVironment propose Bedlam OCU™—an adversarial reasoning system for unmanned platforms. Team Primordial will start with our existing state-of-the-art Surveyor OCU, which already fully or partially meets 78% of the topic’s requirements including enabling UAV/UGV collaboration, autonomously tracking targets, predicting adversary movement, ...

    SBIR Phase I 2010 Department of DefenseArmy
  4. Lightweight EMI Resistant Wiring Solutions

    SBC: MINNESOTA WIRE & CABLE COMPANY            Topic: A10122

    Wiring and connectors are particularly vulnerable to electromagnetic interference. This is in part due to the harnesses that place both power and signal wiring in close proximity. For many applications, the solution to such a problem might be increasing the amount of shielding on the wires. However, for aviation platforms solutions that add weight are typically not viable. Because they form conduc ...

    SBIR Phase I 2010 Department of DefenseArmy
  5. Random Number Generation for High Performance Computing

    SBC: Silicon Informatics, Inc.            Topic: A10AT012

    Highly scalable parallel random number generators (RNGs) will be developed, evaluated and implemented for use in high performance computing on thousands of multi-core processors and general purpose graphics processing units. The main contributions are: (a) design and implementation of new parallel test methods that capture the inter-stream correlations exhibited in practice and complement the curr ...

    STTR Phase I 2010 Department of DefenseArmy
  6. Compact & Ultra-High Resolution Terahertz Spectroscopic/Fingerprint System

    SBC: N.P. PHOTONICS, INC.            Topic: A10AT013

    NP Photonics proposes to develop a fiber-based, compact, tunable, THz spectroscopic/fingerprinting system that offers ultra-high resolution (< 1 MHz), high sensitivity and room temperature operation over the 1-3 THz range. This proposed system will provide high resolution molecular fingerprint information by leveraging NP Photonics high power and narrow linewidth fiber-based THz source, which is b ...

    STTR Phase I 2010 Department of DefenseArmy
  7. Indium Surface Preparation for Improved Flip-Chip Hybridization

    SBC: ADVANCED RESEARCH CORPORATION            Topic: A10017

    For IR sensors, the sensing detector and readout circuitry (ROIC) are commonly joined on a pixel by pixel level in a process referred to as Hybridization. Hybridization requires bonding an ROIC die and a detector die on a pixel level, where the total number of pixels required to bond and form interconnects ranges from 1,000,000 to 16,000,000 individual pixels. The material of choice for Hybridi ...

    SBIR Phase I 2010 Department of DefenseArmy
  8. Ultrafine Grained Steel and Nickel Based Alloy Manufacturing

    SBC: M4 Sciences Corporation            Topic: A10AT001

    This STTR project seeks to develop a new manufacturing system for large-scale, low-cost production of bulk ultrafine grained (UFG) or nanostructured metals in plate, sheet or bar forms. These capabilities will be based on scale-up of a new class of machining-based processes called large strain extrusion machining (LSEM) that has been effective at creating high strength, nanoscale microstructures i ...

    STTR Phase I 2010 Department of DefenseArmy
  9. Large Format Dual Band FPA ROIC for Low Flux Environments

    SBC: INFRARED LABORATORIES INCORPORATED            Topic: A10025

    Based on our analysis, we believe the biggest technology difficulty will be the pixel layout real estate constraint created by the 20um pixel pitch against the various specification requirements like two color, low flux operation, low noise, high dynamic range, variable gain, integrate while read, etc. To solve this problem, we believe our proposed Amplifier Shared Dual Band CTIA (ASDBC) pixel or ...

    SBIR Phase I 2010 Department of DefenseArmy
  10. Dynamic Formats in Distributed Simulation Systems

    SBC: Cogent3D, Inc.            Topic: A09181

    The objective of this topic is to evaluate real-time/runtime construction terrain technologies and determine if these can be directly connected to an enhanced OneSAF constructive simulation through an open API (Open Low Level Extensible Terrain Query API). Doing so would enable OneSAF to support correlated dynamic distributed simulation with run-time published or on-the-fly procedural terrain cons ...

    SBIR Phase I 2010 Department of DefenseArmy
US Flag An Official Website of the United States Government