Award Data

Innovative Imaging and Research proposes to develop a 21st Century color, high-speed extreme high dynamic range (Color-XHDR) video recording technology that will produce engineering-grade video to accurately document rocket motor firings at close range within a test cell without image saturation. This novel imaging system will include a compact, single focal plane array camera and end-to-end image ...

The purpose of this effort is to develop an instrument to accurately calibrate (1% k=2) the lunar spectral reflectance (350 to 2,300 nm) at relatively low expense from a small satellite. Assuming the TSIS missions are successful and the solar irradiance is known, the lunar spectral reflectance can be used to provide known lunar irradiance, thereby providing a stable exo-atmospheric calibration sou ...

The overall goal of the SBIR effort to develop a fully packaged, environmentally hardened, diode-based, locked wavelength, seed laser for seeding next generation Nd:YAG lasers currently being developed for future space-based, high spectral resolution Lidar (HSRL) measurements. The Phase I effort successfully demonstrated that a diode-based, wavelength-locked seed laser can provide the spectral pur ...

In the Phase I effort, Gloyer-Taylor Laboratories LLC (GTL) verified the feasibility of generating power from space particle radiation. This effort successfully demonstrated electrical power production from a particle radiation source using an initial proof-of-concept device. The effort also identified a second approach that has the potential for even better power generation and offers enhanced ...

To enable widespread and rapid airborne bathymetric lidar to adequate depths in many ocean regions a low-cost, rugged, and high energy pulsed laser source must be developed in the ocean water transmittance spectrum of 450 - 490 nm. The ideal laser source will be high performance for lidar (high pulse energy, high rep rate, short pulse duration) with specific targeted emission spectrum to meet ocea ...

The overall goal of SouthWest Nanotechnologies (SWeNT) is the development of superior technology for the large-scale manufacturing and marketing of nanotubes of unique quality for near-term specialty applications. The Phase I of this SBIR focused in demonstrating that SWeNT's process can be scaled-up to a continuous-mode operation. In the commercialization aspects, the company focused on developin ...

In today's propulsion testing environment, the number of simultaneously captured video streams, the number and variety of video derived data products, and quality expectations are increasing, while available manpower and the desired turnaround time between tests is decreasing. This project will take advantage of recently developed super computer clustering technologies to develop new scalable data ...

BasinTools is designed to facilitate the use of remotely sensed data by users who are not remote sensing specialist. Information from remotely sensed data would be used by a wide variety of engineers, planners, and scientist except they lack the expertise, sophisticated software, or high-end hardware to make use of the data. Federal, State, and Local Governments all have need of information derive ...

The goal of this effort is to develop a compact, rugged, electrically efficient, tunable semiconductor laser for the purpose of injection seeding Nd:YAG lasers in NASA lidar systems for remote sensing and atmospheric profiling. A highly stable low power seed laser plays a crucial role in these systems by keeping the high power, Q-switched, Nd:YAG laser at a fixed wavelength and single mode. In add ...

In prior research and development, the project team developed LiveSchool, an online platform to track student behavior. With this Phase I funding, the team will develop and test a prototype of an administrator dashboard. The dashboard will generate reports on individual student behavior patterns across classes and on the prevalence of behavioral issues across different teachers. The dashboard will ...