You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
-
A DUAL LEVEL TEMPERATURE WARNING SWITCH IS TO BE DESIGNED, PROTOTYPED, AND VERIFIED TO MEET TECHNICAL SPECIFICATIONS.
SBC: TECHNOLOGY FOR ENERGY CORP. Topic: N/AA DUAL LEVEL TEMPERATURE WARNING SWITCH IS TO BE DESIGNED, PROTOTYPED, AND VERIFIED TO MEET TECHNICAL SPECIFICATIONS. THE PROTOTYPE DUAL LEVEL TEMPERATURE WARNING SWITCH WILL BE DESIGNED IN MINIATURE, MAKING IT INTERCHANGEABLE WITH THE CURRENT SINGLE LEVEL TEMPERATURE WARNING SWITCH SPECIFIED IN MIL-S-12285/2C, 22 JULY 1975. THE PHASE I RESULTS WILL ESTABLISH THE VIABILITY OF THE DESIGN. THE MANUF ...
SBIR Phase I 1986 Department of DefenseArmy -
A HIGH TEMPERATUE WARNING SWITCH FOR ENGINE COOLING SYSTEMS IS CONCEIVED WHICH PROVIDES WARNING AT A RELATIVELY LOWER TEMPERATURE LEVEL (E.
SBC: Index Industries Inc Topic: N/AA HIGH TEMPERATUE WARNING SWITCH FOR ENGINE COOLING SYSTEMS IS CONCEIVED WHICH PROVIDES WARNING AT A RELATIVELY LOWER TEMPERATURE LEVEL (E.G. 212 DEGREE FAHRENHEIT) IF THE SYSTEM PRESSURE IS BELOW 7 PSIG AND AT A HIGHER TEMPERATURE LEVEL (E.G. 225 DEGREES FAHRENGEIT) IF THE SYSTEM PRESSURE IS ABOVE 7 PSIG. IN THE EVENT OF COOLING SYSTEM PRESSURE LOSS, THIS DUAL-LEVEL, PRESSURE DEPENDENT WARNING SW ...
SBIR Phase I 1986 Department of DefenseArmy -
AIRCRAFT COMPONENTS WHICH UTILIZE THERMOPLASTIC COMPOSITES OFFER SIGNIFICANT ADVANTAGES OVER METALLIC STRUCTURES DUE TO THE COMBINATION OF REDUCED WEIGHT AND INCREASED STRENGTH INHERENT IN COMPOSITE STRUCTURES.
SBC: Taylor S R & Assocs Topic: N/AAIRCRAFT COMPONENTS WHICH UTILIZE THERMOPLASTIC COMPOSITES OFFER SIGNIFICANT ADVANTAGES OVER METALLIC STRUCTURES DUE TO THE COMBINATION OF REDUCED WEIGHT AND INCREASED STRENGTH INHERENT IN COMPOSITE STRUCTURES. FABRICATION OF THERMOPLASTIC COMPOSITES IS PLAGUED BY POROSITY OR VOIDS IN THE CONSOLIDATED PART, POOR, INEFFICIENT FIBER WETTING AND DIFFICULT CONTROL OF RESIN FLOW AND CRYSTALLINITY. ULTR ...
SBIR Phase I 1986 Department of DefenseAir Force -
AN ALGORITHM IS DEVELOPED FOR APPLICATION IN A RAY TRACING PROGRAM TO PROVIDE THE AMPLITUDE, POLARIZATION, AND PHASE OF AN ELECTROMAGNETIC WAVE REFLECTED FROM A DIELECTRIC BODY.
SBC: Intercomp Topic: N/AAN ALGORITHM IS DEVELOPED FOR APPLICATION IN A RAY TRACING PROGRAM TO PROVIDE THE AMPLITUDE, POLARIZATION, AND PHASE OF AN ELECTROMAGNETIC WAVE REFLECTED FROM A DIELECTRIC BODY. TWO DIFFERENT CONFIGURATIONS ARE USED. THE FIRST CONSISTS OF AN ABSORPTIVE DIELECTRIC BODY AND THE SECOND OF A DIELECTRIC BODY COATED WITH A ABSORPTIVE LAYER. THE ALGORITHM IS BASED ON AN EXACT SOLUTION TO THE BOUNDARY VAL ...
SBIR Phase I 1986 Department of DefenseArmy -
AN ALUMINUM RIVET FOR USE ABOVE 500 DEG F DEVELOPMENT
SBC: Measurement Technologies Topic: N/AN/A
SBIR Phase I 1986 Department of DefenseAir Force -
AN ON-LINE X-RAY DIFFRACTION METHOD FOR DETERMINING GRAIN SIZE IN POLYCRYSTALLINE MATERIALS
SBC: TECHNOLOGY FOR ENERGY CORP. Topic: N/AN/A
SBIR Phase I 1986 Department of DefenseArmy -
A PREDICTION MODEL FOR ADVANCED LEADING-EDGE VORTEX FLOW CONTROL
SBC: Targazyme, Inc. Topic: N/AN/A
SBIR Phase I 1986 Department of DefenseAir Force -
A PRESSURE AND TEMPERATURE TRANSDUCER FOR 700-MPA EXPLOSIVE ENVIRONMENTS- DEVELOPMENT
SBC: Flow Research Inc Topic: N/AN/A
SBIR Phase I 1986 Department of DefenseArmy -
A REAL-TIME 3-D CLOUD SIMULATION SYSTEM DEVELOPMENT
SBC: Aeromet, Inc. Topic: N/AN/A
SBIR Phase I 1986 Department of DefenseAir Force -
ARTIFICIAL INTELLIGENCE FOR COMMAND AND CONTROL (BRIGADE COURSE OF ACTION GENERATION DECISION SUPPORT SYSTEM)
SBC: Lb&m Assoc., Inc. Topic: N/AN/A
SBIR Phase I 1986 Department of DefenseArmy
