You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Advanced Instrumentation for Ramjet/Scramjet Combustors
SBC: ACCURATE AUTOMATION CORPORATION Topic: N/AAccurate Automation proposes to design and develop the architecture for an instrumentation system for hypersonic aircraft. We will design an instrumentation system for use in a Mach 8-10 hypersonic testbed for the HyTech engine. We will investigate the feasibility of incorporating a plasma generation capability into this instrumentation system. We will develop an enhanced instrumentation system ...
SBIR Phase I 1997 Department of DefenseAir Force -
Environmentally Safe, In Situ Surface-Protection of Carbon Steel Structures
SBC: ACCURATE AUTOMATION CORPORATION Topic: N/AA special purpose robot to remove corrosion from the interior surfaces of the ductwork in AEDC's Engine Test Facility (ETF) will be designed and developed. The robot willimplemnt the Laser Induced Surface Improvement (LISI) process which alloys the interior surface of the ductwork with a chromimum compound. The system will include a remotely operated robot capable of traversing the ETF ductwork, ...
SBIR Phase I 1997 Department of DefenseAir Force -
BIOLOGICALLY INSPIRED PROCESSOR FOR ALL-SOURCE DATA ASSOCIATION AND FUSION
SBC: ACCURATE AUTOMATION CORPORATION Topic: N/AThis project will develop improved sensor fusion of underwater surveillance and fire control related ]data based upon biologically inspired data association and sensor fusion techniques. In this _proposed SBIR, AAC will examine under-sea surveillance requirements for providing contact data hassociation for two or more contacts in the littoral environment. We will analyze biologically-inspired [tec ...
SBIR Phase I 1997 Department of DefenseNavy -
Precision Logistics Suppot System (PLSS)
SBC: ACCURATE AUTOMATION CORPORATION Topic: N/AAccurate Automation Corporation will design, develop, demonstrate, and transition by the end of Phase II a new tool, the Precision Logistics Support System (PLSS), which can assist Marine Corps logistics personnel in rapidly generating and refining a logistics / supply plan that will best meet the needs of any specific deployment. The prototype PLSS will be configured for a LAN-connected PC en ...
SBIR Phase I 1997 Department of DefenseNavy -
Ultra Narrowband Optical Parametric Oscillator
SBC: Aculight Corporation Topic: N/APresently there are no broadly tenable, narrow linewidth souces that operate throughout the mid-infrared (mid-IR) region of the spectrum, from 1 to 5 microns. Traditional sources have very low spectral brightness (low power per unit spectral bandwidth). This proposal describes a novel approach to produce a source with very high spectral brightness, tunable over the range of 1.1 to 4.3 microns. ...
SBIR Phase I 1997 Department of DefenseAir Force -
Robust Multifunction Laser
SBC: Aculight Corporation Topic: N/AThe high cost of near-to-mid infrared laser sources is problematic for many military applications, such as seekers where sources are short lived. Order-of-magnitude cost reductions are needed for 10-20 watt, 1-micron lasers. The proposed approach to reducing costs involves using novel manufacturing processes to greatly reduce parts count and assembly time, thus reducing cost. When applied to a ...
SBIR Phase I 1997 Department of DefenseAir Force -
Low Power Long Wave Infrared Laser Sources
SBC: Aculight Corporation Topic: N/AWith new detectors capable of sensing 7.5 - 9 micron wavelengths, a future threat is emerging since these detectors can be used in seekers. The need is to counter this threat with a laser source operating at 7.5 - 9 microns. The source requirements are 5 - 10 Watts of average power and a repetition rate of > 10 kHz. The proposed laser source is a Nd:YAG-pumped tandem OPO system consisting o ...
SBIR Phase I 1997 Department of DefenseNavy -
Solid State Seed Laser for COIL
SBC: Aculight Corporation Topic: N/AThe Air Force Phillips Laboratory is seeking approaches for demonstrating frequency agile COIL (chemical oxygen iodine lasers) operating near 1.31 microns and at 10 kHz rep rates. Frequency conversion approaches must be capable of handling high average power levels, greater than 10 kWatts. Converting a COIL device to high peak powers will be necessary for frequency conversion. The approach prop ...
SBIR Phase I 1997 Department of DefenseAir Force -
Low-cost, high brightness, short-pulse eyesafe solid-state laser transmitter for long-range missile defense
SBC: Aculight Corporation Topic: N/AFor future long-range theater ballistic missile defense, aircraft-mounted LADAR systems require eyesafe laser transmitters that produce higher pulse energy and better beam quality than currently available optical parametric oscillators (OPOs) pumped by diode-pumped Nd:YAG lasers. Aculight proposes a novel laser transmitter approach that can simultaneously generate the required pulse energy, b ...
SBIR Phase I 1997 Department of DefenseNavy -
A REAL-TIME 3-D CLOUD SIMULATION SYSTEM DEVELOPMENT
SBC: Aeromet, Inc. Topic: N/AN/A
SBIR Phase I 1986 Department of DefenseAir Force