You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Economic recovery and reuse of nutrients from wastewater
SBC: XPLOSAFE LLC Topic: 15NCER05Nutrient pollution caused by excess nitrogen and phosphorus in the water is a costly and challenging environmental problem with widespread negative health and ecological effects. During Phase I XploSafe successfully confirmed the technical feasibility of using its proprietary low-cost biodegradable sorbents to passively adsorb target nutrient ions (ammonium, nitrate, urea, and phosphate) from prim ...
SBIR Phase II 2017 Environmental Protection Agency -
Extended SWIR Unipolar Barrier Detectors Lattice Matched to GaSb Substrates
SBC: AMETHYST RESEARCH INC Topic: A16042The extended short wavelength infrared (e-SWIR) wavelength band is in a performance gap for infrared detectors. At both shorter and longer wavelengths high performance detector technologies exist: SWIR InGaAs detectors (1.7 m cutoff), and MWIR (3-5 m cutoff) detectors such as InAs-based and GaSb-based Unipolar Barriers, MCT, and InSb. This program proposes development of high performance e-SWIR de ...
SBIR Phase II 2017 Department of DefenseArmy -
Smart Cervical Collar for Closed Loop Control of Intracranial Pressure
SBC: Quadradyne Technologies, LLC Topic: DHA17010This proposal presents a non-invasive device to reduce, and control, intracranial pressure in the event of a traumatic brain injury (TBI). The device is compact, rugged, light, and easily transported by medics or civilian first responders in the field.
SBIR Phase I 2017 Department of DefenseDefense Health Agency -
Development of Explosive Feedstock for Commercial-off-the-Shelf (COTS) 3D Printers
SBC: E & G Associates, Inc. Topic: N171060Traditional manufacturing methods for producing warheads, propellants, and pyrotechnic systems are timely and costly. Additive manufacturing (AM) approaches offer one path of alternative manufacturing technologies. Among various technologies, powder bed fusion (PBF) is one promising approach. Hewlett Packards Multi-Jet Fusion printers utilize a unique PBF process that presents a desirable solution ...
SBIR Phase I 2017 Department of DefenseNavy -
Cavitation Peening for Improved Ballistic Performance
SBC: Ormond, LLC Topic: N171037A need exists to improve the ballistic response of armor for Littoral Combat Ships. Simply increasing armor thickness is unacceptable because the associated increase in weight and space would reduce vessel performance speed and range. Surface treatment techniques for current armor materials such as steel, aluminum and ceramic may improve armor performance significantly without an associated weight ...
SBIR Phase I 2017 Department of DefenseNavy -
Fast Rise-time High Power Radio Frequency (HPRF) Pulse Shaping
SBC: EAGLE HARBOR TECHNOLOGIES, INC. Topic: N172135Eagle Harbor Technologies, Inc. (EHT) is collaborating with researchers at the Pulsed Power and Power Electronics Center at Texas Tech University (TTU) to develop a high-power microwave switch that is capable of very fast rise times, adjustable pulse width, and high pulse repetition frequency (PRF). EHT has developed solid-state pulsed power systems that has the potential to improve the performanc ...
SBIR Phase I 2017 Department of DefenseNavy -
Open Standard for Display Agnostic 3D Streaming (DA3DS)
SBC: Third Dimension Technologies LLC Topic: AF16AT07The Air Force has identified a need for a display agnostic common streaming model for 3D data. Third Dimension Technologies (TDT) and Oak Ridge National Laboratory (ORNL) have formed a consortium to define a 3D streaming model based on open standards for Display Agnostic 3D Streaming (DA3DS). Two factors are driving this need. The first is the dramatic increase in the collection, storage and trans ...
STTR Phase II 2017 Department of DefenseAir Force -
Fire Retardant Nylon Yarn
SBC: SCIGENESIS, LLC Topic: A17075SciGenesis will apply its FR-technology to nylon-only and nylon/cotton (50/50) blended yarns to demonstrate the feasibility of this technological platform at the individual yarn stage (i.e. pre-woven). The unique FR chemistry that SciGenesis has developed encompasses char promoting agents, heat reflective particles, Lewis-acid catalysts and a laundering durable binding system. Implementing this ...
SBIR Phase I 2017 Department of DefenseArmy -
S-RAM Energy Recovery Compressor for Aircraft Thermal Management Systems (TMSs)
SBC: S-Ram Dynamics, LLC Topic: AF171057S-RAM Dynamics (S-RAM) proposes to design, fabricate, test, and commercialize a high-performance axial piston transcritical CO2 energy recovery compressor (ERC) to support next-generation aircraft thermal management systems for the U.S. Air Force and commercial applications. The S-RAM ERC will be developed and commercialized with the support of the Rolls-Royce Thermal Management System team and Pu ...
SBIR Phase I 2017 Department of DefenseAir Force -
Advanced Fast Shutter for Debris Mitigation
SBC: HYPERION TECHNOLOGY GROUP INC Topic: DTRA143007In an effort to development more robust optical system coatings DTRA, in collaboration with Sandia National Labs, is working to characterize the degradation of optical materials for space systems when exposed to high intensely EUV/ cold x-rays. The experiments utilizes the Double Eagle z-pinch facility which generates high current, high voltage arc pinch plasma to produce an intense EUV and cold x ...
SBIR Phase II 2017 Department of DefenseDefense Threat Reduction Agency