Award Data

This proposal aims to develop a new, compact reactor for production of ammonia from air and water with renewable electricity. The conversion is carried out in a solid-state alkaline electrochemical cell at temperatures below 200oC and pressures below 10bar. Water vapor and N2 gas are fed into cathode side of the cell to form ammonia and hydroxide ions. As ammonia is produced from the cathode, the ...

Nutrient pollution caused by excess nitrogen and phosphorus in the water is a costly and challenging environmental problem with widespread negative health and ecological effects. During Phase I XploSafe successfully confirmed the technical feasibility of using its proprietary low-cost biodegradable sorbents to passively adsorb target nutrient ions (ammonium, nitrate, urea, and phosphate) from prim ...

This proposal aims to develop a new, compact reactor for production of ammonia from air and water with renewable electricity. The conversion is carried out in a solid-state alkaline electrochemical cell at temperatures below 200oC and pressures below 10bar. Water vapor and N2 gas are fed into cathode side of the cell to form ammonia and hydroxide ions. As ammonia is produced from the cathode, the ...

Development of a high throughput screen to detect the effects of both preand postbiotransformed compounds for enhanced content drug discovery workflows Project Summary This Small Business Innovation Research Phase II project will build upon our successful Phase I demonstration that substrate free autobioluminescent signal generation can detect both the preand post biotransformed metabolic impacts ...

The extended short wavelength infrared (e-SWIR) wavelength band is in a performance gap for infrared detectors. At both shorter and longer wavelengths high performance detector technologies exist: SWIR InGaAs detectors (1.7 m cutoff), and MWIR (3-5 m cutoff) detectors such as InAs-based and GaSb-based Unipolar Barriers, MCT, and InSb. This program proposes development of high performance e-SWIR de ...

This proposal presents a non-invasive device to reduce, and control, intracranial pressure in the event of a traumatic brain injury (TBI). The device is compact, rugged, light, and easily transported by medics or civilian first responders in the field.

Traditional manufacturing methods for producing warheads, propellants, and pyrotechnic systems are timely and costly. Additive manufacturing (AM) approaches offer one path of alternative manufacturing technologies. Among various technologies, powder bed fusion (PBF) is one promising approach. Hewlett Packards Multi-Jet Fusion printers utilize a unique PBF process that presents a desirable solution ...

Because of its high sensitivitypolymerase chain reactionPCRis the gold standard for the diagnosis of many infectious diseasesbut generally only implemented in well equipped laboratoriesOne of the major roadblocks for expanding PCR to point of care markets is the lack of simplerobustsingle tube PCR designs which preserve its laboratory based high sensitivity and specificityIn this Fast Track STTR a ...

Abstract Cancer patients treated with many widely used chemotherapeutic agents including paclitaxel PAC and oxaliplatin OXA frequently develop chemotherapy induced peripheral neuropathy CIPN that may lead to dose reduction dosing schedule changes and termination of treatment In some patients acute peripheral neuropathy PN can transition into chronic PN lasting well beyond termination ...

PROJECT SUMMARY As the cancer drug industry suffers from the lowest success rate in developing cancer cure drugs cell migration assessment assays that evaluate the transition of cells from a benign to a metastatic phenotype have gained more attention Given the fact that metastatic cancer cells are substantially harder to eradicate than those that are benign migratory propensity is now understoo ...