You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Lightweight Thermoacoustic Device Using Novel Materials for Noise Cancellation of Military Vehicles

    SBC: Lynntech Inc.            Topic: A15AT006

    In military settings, vehicle engine noise can be a source of vulnerability, revealing the location of vital resources to hostile threats. Cancellation of the engine noise is necessary to safeguard many military missions and mitigate enemy threats. This proposal concerns an innovative lightweight thermoacoustic device using thin, flexible, novel materials for active noise cancellation of military ...

    STTR Phase I 2015 Department of DefenseArmy
  2. EMS Monitor & Broadcast Training Capacity Enhancement

    SBC: Kerberos International, Inc.            Topic: A15AT008

    Electromagnetic spectrum (EMS) supremacy is vital to the success of the war fighter; spectrum dominance, however, is becoming increasingly more difficult with advances in signal processing algorithms and device technologies. Realistic training environments are essential to properly prepare the war fighter for the non-permissive, congested, contested, and dynamic spectrum that will be encountered ...

    STTR Phase I 2015 Department of DefenseArmy
  3. Multiple Antenna Element Approach to a Combined Precision Attitude Determination and GPS Anti-Jamming/Spoofing Capability

    SBC: UHU TECHNOLOGIES LLC            Topic: A15AT013

    A GPS receiver based system with associated antenna array design is proposed to provide continuous information for attitude determination. This system will adapt to GPS jamming, and spoofing threats, to maintain navigation in contested environments. The approach utilizes two dimensional, beam steered arrays which point a minimum of four beams at a priori known satellite locations relative to the ...

    STTR Phase I 2015 Department of DefenseArmy
  4. Fuel Efficient Nanofluid Gear Oil

    SBC: Applied Colloids            Topic: A15AT018

    Applied Colloids proposes the use of its proprietary nanofluid technology as an add-in treatment process for gearboxes and transmissions of military ground vehicles that would reduce the internal friction generated in them. This would reduce the vehicle fuel consumption by 2 to 3%. It would also reduce the wear and maintainance costs for this equipment. Applied Colloids will form the nanofluids ...

    STTR Phase I 2015 Department of DefenseArmy
  5. Nondestructive Concrete Characterization System

    SBC: NLA DIAGNOSTICS LLC            Topic: A12aT013

    During covert operations, the U.S. Army may be required to breach a concrete structure using a controlled explosion. When choosing the most effective charge size and placement, it is vital to perform a rapid field assessment of the material and structural properties of the target structure. However, recent advances in manufacturing high strength concrete materials (such as Ductal) may increase the ...

    STTR Phase I 2013 Department of DefenseArmy
  6. Highly Efficient Engineered Obscurant Nanomaterials

    SBC: Lynntech Inc.            Topic: A12aT024

    Obscurant materials are used by the Army to protect both the soldier as well as military physical assets. Several obscuration systems have been developed over the years to defeat threats in all areas of the electromagnetic spectrum. Current obscurant materials typically consist of off-the-shelf or processed metal particles or flakes in which key properties such as particle size and aspect ratio ...

    STTR Phase I 2013 Department of DefenseArmy
  7. Nondestructive Concrete Characterization System

    SBC: FDH Engineering Inc.            Topic: A12aT013

    With the advent of very high strength concrete, such as that manufactured by LaFarge, calculations that have been used historically to determine the explosive content needed to breach concrete structures have been compromised. As a result of this and other mission critical issues, the Army has indentified a need to develop a man-portable device capable of estimating the thickness and strength of ...

    STTR Phase I 2013 Department of DefenseArmy
  8. Construction of 3-D Terrain Models from BIG Data Sets

    SBC: Scalable Algorithmics USA            Topic: A13AT005

    The objective of this proposal is to design, analyze, and implement scalable algorithms for analysis-driven construction of high-resolution 3D terrain models from BIG terrain data sets, and to build a software infrastructure for making analysis-prepared terrain models available to data consumers on multiple platforms. Analysis-driven modeling means that the construction of the model is influence ...

    STTR Phase I 2013 Department of DefenseArmy
  9. Solar Blind MgZnO Photodetectors

    SBC: Agnitron Technology            Topic: A13AT006

    This Phase I program is focused on enhancement of the performance of MgZnO based solar blind detectors. MgZnO alloys have superior optoelectronic properties with bandgaps suitable for solar blind detection. Issues related to doping and miscibility will be addressed. This will involve the use of advanced MOCVD and MBE growth techniques and consideration of both Schottky and p-n junction devices. No ...

    STTR Phase I 2013 Department of DefenseArmy
US Flag An Official Website of the United States Government