You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Highly Efficient Engineered Obscurant Nanomaterials

    SBC: LYNNTECH INC.            Topic: A12aT024

    Obscurant materials are used by the Army to protect both the soldier as well as military physical assets. Several obscuration systems have been developed over the years to defeat threats in all areas of the electromagnetic spectrum. Current obscurant materials typically consist of off-the-shelf or processed metal particles or flakes in which key properties such as particle size and aspect ratio ...

    STTR Phase I 2013 Department of DefenseArmy
  2. Using Biomineralization Sealing for Leakage Mitigation in Shale during CO2 Sequestration

    SBC: Montana Emergent Technologies, Inc.            Topic: 17a

    Montana Emergent Technologies, Inc., (MET) in conjunction with the Center for Biofilm Engineering at Montana State University, proposes to investigate the feasibility of using biomineralization-based technology to seal unwanted leakage pathways relative to carbon dioxide stored in deep geologic formations. The title of this Small Business Technology Transfer Research Phase I project is Using Bio ...

    STTR Phase I 2013 Department of Energy
  3. Laser Cladding Applied to the Construction of PFCs with Integral Tritium Diffusion Barriers

    SBC: NANOHMICS INC            Topic: 27b

    Selection of the Plasma-Facing Component (PFC) material composition is a primary consideration in future fusion reactor design. The PFC materials must not only withstand the harsh operating conditions of the reactor, but the amount of tritium uptake experienced by the PFC during operation is a significant factor. Proper operation, safety and environmental impact mandate that t ...

    STTR Phase I 2013 Department of Energy
  4. Rotating Liner Engine: Improving Efficiency of Heavy Duty Diesels by Significant Friction Reduction, and Extending The Life of Heavy Duty Engines.

    SBC: ROTATING SLEEVE ENGINE TECHNOLOGIES INC            Topic: 06h

    The ultimate goal of the project is to demonstrate that the rotating liner engine (RLE) can increase fuel efficiency in heavy duty vehicles by about 3.5-4% at full load, about 25% at idle, and about 10% for an average duty cycle, can reduce CO2, NOx and PM and reduce engine wear. Design already completed. The face seal is the only technical challenge of the concept, and the main design features pe ...

    STTR Phase I 2013 Department of Energy
  5. Carbon Nanotube-based Solar Water Heater

    SBC: SOLARNO INC            Topic: 03e

    Solar water heaters are a well-established renewable energy technology that has been widely adopted outside of the United States. Here we propose to significantly improve the evacuated solar tube collectors (ETC) by utilizing the dry-drawable carbon nanotube (CNT) sheets for solar energy absorption and CNT multifunctional nanocomposites with functional layers of heat accumulators and heat transpo ...

    STTR Phase I 2013 Department of Energy
  6. High Efficiency Thin Film Thermoelectric Generators (HiE TFTEGs) for Vehicles

    SBC: Sheetak Inc.            Topic: 06f

    A significant portion of the waste heat from engine exhaust can be recovered using thermoelectric generators to achieve up to 10% gain in automotive mileage. There have been several efforts underway on this front but most have focused on demonstrating thermoelectric generators using bulk materials that consume significant amount of raw materials and are prone to failures due to thermal expansion, ...

    STTR Phase I 2013 Department of Energy
  7. Solar Blind MgZnO Photodetectors

    SBC: AGNITRON TECHNOLOGY, INC.            Topic: A13AT006

    This Phase I program is focused on enhancement of the performance of MgZnO based solar blind detectors. MgZnO alloys have superior optoelectronic properties with bandgaps suitable for solar blind detection. Issues related to doping and miscibility will be addressed. This will involve the use of advanced MOCVD and MBE growth techniques and consideration of both Schottky and p-n junction devices. No ...

    STTR Phase I 2013 Department of DefenseArmy
  8. Xenopus Melanophore-Based Toxicity Sensor for Water

    SBC: AGAVE BIOSYSTEMS INC.            Topic: A07T030

    Deployed armed forces often have to rely on water that is produced from decentralized sources, which presents significant difficulties for assuring the water is free of chemical toxicants. Analysis of these water supplies often requires complex instrumentation that is not practical for field use. An innovative alternative is the use of cell-based biosensors that can rapidly assess the general to ...

    STTR Phase I 2007 Department of DefenseArmy
  9. High Polarization and High Peak Current Compositionally Graded AlGaAs/GaAs Superlattice Photocathodes for RF Gun Applications

    SBC: SVT ASSOCIATES INC            Topic: 30d

    Negative-electron-affinity (NEA) photocathodes, which produce polarized electrons, are a vital component of current electron accelerators. However, future systems, such as the International Linear Collider (ILC), will require significant upgrades to these photocathodes. For example, the polarized electron beam intensity will need to be at least 20 times greater than that produced by strained GaA ...

    STTR Phase I 2007 Department of Energy
  10. High Polarization and High Robustness Antimonide Based Superlattice Photocathodes for RF Gun Applications

    SBC: SVT ASSOCIATES INC            Topic: 30d

    Negative-electron-affinity photocathodes, which produce polarized electrons, are a vital component of electron accelerators such as that at the Stanford Linear Accelerator Center. Future systems, such as the International Linear Collider, will require a polarized electron beam intensity at least 20 times greater than produced by strained GaAs, which is used in the current generation of photocatho ...

    STTR Phase I 2007 Department of Energy
US Flag An Official Website of the United States Government