List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Development of In-Process Monitoring Closed-Loop Feedback for Use in Aluminum Alloy Additive Manufacturing (AM) Applications

    SBC: SENTIENT CORPORATION            Topic: A17003

    Sentient Corporation proposes to integrate its DigitalClone Component (DCC) physics-based modeling technology and Johns Hopkins University Applied Physics Laboratorys in-situ thermal sensors to develop a comprehensive sensor-based tool to monitor, identify and locate defects in metallic additive manufacturing, and create a DCC model-enabled feedback loop to correct the process-induced defects to i ...

    SBIR Phase I 2018 Department of DefenseArmy
  2. Ultra-Durable Polyolefin Based Waterproofing Coating

    SBC: RESODYN CORPORATION            Topic: A16114

    The U.S. Army is interested in the development of innovative materials, films, coatings and technologies or manufacturing techniques which allow current U.S. Army airdrop related hardware and equipment to survive fresh and salt water operations with increased reliability and without damage and significant maintenance impact. Resodyn Corporation proposes for development a durable, moisture-impermea ...

    SBIR Phase I 2017 Department of DefenseArmy
  3. Lithium Ion / Super Capacitor Hybrid System

    SBC: Electro Standards Laboratory, Inc.            Topic: A15AT010

    A hybrid lithium ion battery / super capacitor energy storage device is developed that uses the high power capability of the super capacitor to satisfy pulsed power load requirements such that stress on the lithium ion batteries is reduced. This results in extended discharge time and higher efficiency utilization of the battery stack.

    STTR Phase I 2015 Department of DefenseArmy
  4. Reduced Drag Connector for Hellfire Missile

    SBC: Stutz Applied Technology, Inc.            Topic: A14068

    This proposal is for research into various configurations to reduce or eliminate the drag and resulting lateral loading that result from the shotgun connector and evaluate the potential overall weapon system improvement by simulating the trajectory of the improved system. Three configurations will be studied by computational fluid dynamics to estimate aerodynamic properties and utilized to simulat ...

    SBIR Phase I 2015 Department of DefenseArmy
  5. Dual-Mode Continuous-Wave Ladar and Optical Communications System

    SBC: Bridger Photonics, Inc.            Topic: A12089

    Because the data products generated by modern imaging ladar systems are inherently large in information content, there is currently a severe bottleneck in the communications of these products to end users, particularly when full-waveform recovery is desired. Bridger Photonics Inc. proposes to develop a dual-mode laser system capable of performing laser radar imaging as well as high speed free-spa ...

    SBIR Phase I 2013 Department of DefenseArmy
  6. Instrument for Measuring Millimeter-Wave Polarimetric Bidirectional Reflectance Distribution Function

    SBC: APPLIED RADAR, INC.            Topic: A123105

    The proposal will perform study and design of a gonioreflectometer or equivalent instrument that can measure Polarimetric Bidirectional Reflectance Distribution Function (PBRDF) in the millimeter wave (mmW) spectrum using heterodyne transmit/receive (Tx/Rx) radar technology. The instrument will be used to coherently measure amplitude and phase information and construct a BRDF with user-specified ...

    SBIR Phase I 2013 Department of DefenseArmy
  7. The Most Efficient (TME) Cold Chain Container for Blood

    SBC: RESODYN CORPORATION            Topic: A123113

    Resodyn Corporation proposes to develop a novel cold chain system with a Lifetime Warranty for the vacuum container. The container composes a passive energy efficient system for transporting blood and pharmaceuticals in hostile environments for up to three days. Capacity is four 500 ml liter blood transfusion bags. Energy efficiency is possible by the novel shape and super insulating qualities ...

    SBIR Phase I 2013 Department of DefenseArmy
  8. Environmentally Friendly Low Friction Coating for Concrete Barriers

    SBC: RESODYN CORPORATION            Topic: 121FH1

    Resodyn Corporation is proposing a material and application system that will create a low friction coating on concrete median barriers. The advanced material developed for the low friction coating is an affordable, tough, weather resistant, and environmentally friendly copolymer. The proposed application concept is for truck mounted equipment that enables a single pass application of the coating ...

    SBIR Phase I 2012 Department of Transportation
  9. Development of Low Temperature Ultracapacitor

    SBC: Yardney Technical Products, Inc.            Topic: A12aT010

    The objective of this Phase 1 effort is to develop an asymmetric supercapacitor (ASC) that provides>10 Wh/kg energy density and a high power density, and maintains this performance down to -55 degrees C. Yardney Technical Products (YTP), a recognized specialty high energy battery manufacturer in Pawcatuck, CT in collaboration with the Jet Propulsion Laboratory (JPL) proposes to design, develop and ...

    STTR Phase I 2012 Department of DefenseArmy
  10. Surface Engineering Technologies for Improved Gear Efficiency

    SBC: SENTIENT CORPORATION            Topic: A12022

    The overall goal of this project is to develop an optimized surface texture process in order to maximize the efficiency of rolling/sliding contacts such as gears. Development of this high efficiency, rolling/sliding surface will be guided by Sentient's unique combination of modeling capabilities in the area of mixed-EHL contacts, scuffing, and contact fatigue life prediction. Phase I wi ...

    SBIR Phase I 2012 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government