You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. FPGA Low Power Design Rules

    SBC: BINACHIP, INC.            Topic: A09127

    Commercial FPGA programming software tools use logic synthesis tools to route the connections between logic gates, look-up tables, and memory units. Current commercial tools, however, are optimized to maximize operation speed and minimize area and memory utilization. This proposal addresses the needs of the Department of Defense for a solution that provides a means of reducing FPGA power consumpti ...

    SBIR Phase I 2010 Department of DefenseArmy
  2. Optimum Control of Induction Generators for Water Current Energy Harnessing

    SBC: Electro Standards Laboratory, Inc.            Topic: 815

    Optimization of generator performance and maximization of output power are difficult to attain in the generation of hydro-power. This is due to the changing water conditions and corresponding changes in the form of available energy. ESL proposes to use self-tuning controls in combination with a suitably chosen and optimized generator driven by hydro-energy and condition it for distribution to then ...

    SBIR Phase I 2010 Department of Commerce
  3. Photovoltaic cells integrated with thermoelectric coolers for critical electronic equipment cooling and thermal management of base camps

    SBC: EPIR TECHNOLOGIES INC            Topic: A10AT024

    Present thermoelectric devices operate at about 10% of the Carnot efficiency, whereas the efficiency of compressor-based refrigerators is larger than 30%. An increase in the thermoelectric figure of merit ZT above 3 is needed before thermoelectric technology can replace current air conditioning technologies in many applications. Recent models have predicted that ZT can reach 6 in metal/HgCdTe supe ...

    STTR Phase I 2010 Department of DefenseArmy
  4. Passive Infrared Detection of Aerosolized Bacterial Spores

    SBC: EPIR TECHNOLOGIES INC            Topic: A10AT019

    The capability to reliably and remotely detect, identify and track biological aerosols is a critical need for the United States military. EPIR Technologies proposes to improve this capability by making use of the infrared signatures from biological aerosol broadband Mie scattering, comprising both mid and long wavelength infrared (MW/LWIR) components, as well as a potential polarization component. ...

    STTR Phase I 2010 Department of DefenseArmy
  5. Small Pitch Flip-Chip Interconnects for Focal Plan Arrays/Readout Integrated Circuit Hybridization

    SBC: EPIR TECHNOLOGIES INC            Topic: A09084

    Infrared night vision is a key technology employed by the U.S. military for multiple critical applications. The cameras utilize detector pixel arrays (often composed of HgCdTe) hybridized to silicon read out circuitry. For next generation applications, the goal is to reduce pixel pitch and increase the number of pixels in the chip to improve image resolution and increase the instantaneous area tha ...

    SBIR Phase I 2010 Department of DefenseArmy
  6. In-Vacuo Passivation of High Aspect Ratio HgCdTe Surfaces

    SBC: EPIR TECHNOLOGIES INC            Topic: A10018

    As HgCdTe technology has evolved, many of the devices used in infrared detector applications have required the creation of high-aspect-ratio morphologies. Therefore, equally important to the creation of these high-aspect-ratio geometries is the ability to subsequently deposit the necessary materials on these surfaces. To ensure ideal device performance, the material deposition must be uniform, c ...

    SBIR Phase I 2010 Department of DefenseArmy
  7. Behavior of Minimum Signature Propellants During Impact ITests on Insensitive Munitions

    SBC: ILLINOISROCSTAR LLC            Topic: A09128

    Predicting the violent behavior of energetic materials in accident scenarios is an important issue for the analysis of the performance of explosives and solid rocket propellants. We propose a computational program to predict the shock initiation behavior and subsequent energy release that leads to violent reaction of minimum signature propellants under several impact threat conditions. The modelin ...

    SBIR Phase I 2010 Department of DefenseArmy
  8. Compact Efficient Electrically Small Broadband Antennas

    SBC: MINERVA SYSTEMS & TECHNOLOGIES LLC            Topic: A10131

    The objective of this proposal is to design and develop compact, efficient, electrically small, broadband antennas that are capable of handling high voltages of greater than 100 kV, and fit into small geometrical spaces of less than 40 mm in diameter and 50 mm in length. Previously insurmountable challenges to achieving the stringent requirements of simultaneous compact size, wider bandwidths, an ...

    SBIR Phase I 2010 Department of DefenseArmy
  9. Flat Panel Shelter-Mountable Phased Array Antenna for DoD Systems of Record

    SBC: MINERVA SYSTEMS & TECHNOLOGIES LLC            Topic: A09176

    The objective of this proposal is to develop innovative concept designs for flat-panel, low-profile, smallest possible aperture, phased-array GBS receive antennas in the 10.5 – 13.5 GHz Ku-band and 20.2 – 21.2 GHz K/Ka-band. Furthermore, the objectives include that the antenna be realized within a 40” cross section. Conventional array antenna designs to meet the G/T requirement ...

    SBIR Phase I 2010 Department of DefenseArmy
  10. Modular Perfusion Bioreactor for Tissue Engineering

    SBC: RESODYN CORPORATION            Topic: OSD09H11

    This project will develop and demonstrate a prototype Modular Perfusion Bioreactor (MPB) for tissue engineering applications. While many unique styles of bioreactors have been proposed for various types of stem cell and tissue cultures, there is not a single, easy-to-use device that accommodates the multiple diverse needs of multiple tissue culture types.. In order to take advantage of recent ad ...

    SBIR Phase I 2010 Department of DefenseArmy
US Flag An Official Website of the United States Government