You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Resource Intelligent VPU Utilization Leading to an Effectively Threaded System (RIVULETS)

    SBC: ADVENTIUM ENTERPRISES, LLC            Topic: A15102

    To improve performance of Army CFD codes on new HPC architectures using MIC co-processors, we propose the RIVULETS tool which uses hybrid algorithms and automatic tuning to decrease CFD run-time and improve numerical performance. Existing CFD codes are parallelized using MPI, a highly effective approach for distributed architectures with large quantities of system memory and relatively simple seri ...

    SBIR Phase I 2016 Department of DefenseArmy
  2. Engaging Spanish-English Preschool Teachers to Make Data-Based Decisions in Authentic Settings

    SBC: EARLY LEARNING LABS, INC.            Topic: 1

    This project team will develop and test a prototype app of a screening assessment for children who are Spanish-English Dual Language Learners (SE-DLL) in early education. The prototype will provide formative assessment reports to teachers to guide their decision-making, and will include a series of videos to increase knowledge on core competencies of supporting SE-DLL children. At the end of Phase ...

    SBIR Phase I 2016 Department of Education
  3. Monolithic Spin-Torque Microwave Diode Spectrograph

    SBC: NVE CORP. (FORMERLY NONVOLATILE ELECTRONICS, INC.            Topic: A16AT016

    This Phase I Small Business Technology Transfer program will simulate and demonstrate the feasibility of a Spin-torque microwave diode spectrograph for real-time determination and monitoring of incident microwave signals. The microwave detection will be performed by a bandwidth encompassing parallel array of nano-patterned magnetic tunnel junctions (MTJs). When an ac current of microwave frequency ...

    STTR Phase I 2016 Department of DefenseArmy
  4. Patch-Man (Patch Creator, Distribution & Management System)

    SBC: ARCHITECTURE TECHNOLOGY INC            Topic: A15110

    System vulnerabilities are being actively exploited in DoD networks and pose a high risk to Army Information Systems (IS). The Army is seeking a patch management system capable of providing automated and continuous Information Assurance (IA) patches for fielded, tactical systems, while providing a remote capability for auditing and assessing system vulnerability. Architecture Technology Corp (ATCo ...

    SBIR Phase I 2016 Department of DefenseArmy
  5. Novel Compact FCG for DEW Applications

    SBC: ARC TECHNOLOGY LLC            Topic: A10029

    This proposal details the development of a new FCG design that reduces energy losses for small package sizes. It addresses the major performance limiting factors associated with small helical FCGs and facilitates driving high output voltage, moderate current loads directly, without the need for a transformer. Applications for this device include single shot, high peak power loads for directed en ...

    SBIR Phase I 2010 Department of DefenseArmy
  6. Indium Surface Preparation for Improved Flip-Chip Hybridization

    SBC: ADVANCED RESEARCH CORPORATION            Topic: A10017

    For IR sensors, the sensing detector and readout circuitry (ROIC) are commonly joined on a pixel by pixel level in a process referred to as Hybridization. Hybridization requires bonding an ROIC die and a detector die on a pixel level, where the total number of pixels required to bond and form interconnects ranges from 1,000,000 to 16,000,000 individual pixels. The material of choice for Hybridi ...

    SBIR Phase I 2010 Department of DefenseArmy
  7. Lightweight EMI Resistant Wiring Solutions

    SBC: MINNESOTA WIRE & CABLE CO            Topic: A10122

    Wiring and connectors are particularly vulnerable to electromagnetic interference. This is in part due to the harnesses that place both power and signal wiring in close proximity. For many applications, the solution to such a problem might be increasing the amount of shielding on the wires. However, for aviation platforms solutions that add weight are typically not viable. Because they form conduc ...

    SBIR Phase I 2010 Department of DefenseArmy
  8. Modular Perfusion Bioreactor for Tissue Engineering

    SBC: RESODYN CORPORATION            Topic: OSD09H11

    This project will develop and demonstrate a prototype Modular Perfusion Bioreactor (MPB) for tissue engineering applications. While many unique styles of bioreactors have been proposed for various types of stem cell and tissue cultures, there is not a single, easy-to-use device that accommodates the multiple diverse needs of multiple tissue culture types.. In order to take advantage of recent ad ...

    SBIR Phase I 2010 Department of DefenseArmy
  9. Bimetallic Nanoparticle Catalysts for Reforming of Logistics Fuels

    SBC: NanoScale Materials, Inc.            Topic: A09AT018

    High efficiency, low pollution, and long lifetime make hydrogen-powered fuel cells desirable for portable power generation by the Army. However, it is impractical to transport hydrogen to where it is needed. Instead, reforming a transportable liquid fuel such as JP-8 or diesel fuel can produce the hydrogen for the fuel cell. Noble metal catalysts can speed this reforming, but they are expensive a ...

    STTR Phase I 2010 Department of DefenseArmy
  10. Chemical-Biological Forensic Evidence Container with Agent and Tamper Resistant Tools

    SBC: NanoScale Materials, Inc.            Topic: A10AT003

    The proposed research incorporates several inventions to produce structural components that can be assembled into a highly enhanced chemical-biological (CB) forensic evidence container for transport and storage of contaminated articles. Bio-hazardous materials are frequently encountered in standard investigations, and currently used evidence bags are designed to handle the containment and preserv ...

    STTR Phase I 2010 Department of DefenseArmy
US Flag An Official Website of the United States Government