You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fine Tracking and Aimpoint Maintenance for Phased Array High Energy Lasers

    SBC: Guidestar Optical Systems, Inc.            Topic: A18130

    High Energy Laser (HEL) systems provide many benefits on the battlefield, such as speed of light engagement, precision engagement with limited collateral damage, graduated response (lethal and non-lethal effects), and low cost per shot. Recent developments in phased array HEL technology is enabling the integration of HEL systems on small ground-based platforms. To support these HEL systems, a high ...

    SBIR Phase I 2019 Department of DefenseArmy
  2. A Semi-Empirical Tool for Parameter-Based Helicopter Noise Modeling

    SBC: DELTA GROUP INTERNATIONAL LLC            Topic: A18132

    A semi-empirical software tool for parameter-based helicopter noise modeling is proposed. The software tool incorporates first-principles models for various helicopter noise sources and calibrates the parameters to match scaled acoustic measurements taken from wind tunnel experiments and/or flight tests for a variety of flight conditions. The tuned models are used to predict the acoustic state of ...

    SBIR Phase I 2019 Department of DefenseArmy
  3. Rapid Prototyped 3D Printed Filters for CW Agent Protection

    SBC: TDA RESEARCH, INC.            Topic: A18BT018

    Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...

    STTR Phase I 2019 Department of DefenseArmy
  4. Canine Non-Line of Sight Directional Control System

    SBC: MANTEL TECHNOLOGIES, INC.            Topic: A19007

    Multi-purpose canines (MPCs) attached to Army Special Operational Forces (ARSOF) units play pivotal roles in small unit tactics as a force multiplier. The ARSOF canine handler’s inability to effectively communicate with the MPC in non-line of sight (non-LOS) scenarios limit ARSOF Soldier maneuverability, survivability, lethality and unit tactical advantage. Current techniques for off-leash direc ...

    SBIR Phase I 2019 Department of DefenseArmy
  5. A Design Tool for Minimizing the Acoustic Signature of Small Rotors

    SBC: DELTA GROUP INTERNATIONAL LLC            Topic: A19019

    An innovative modeling utility is proposed for designing rotor blades for Unmanned Aerial Systems (UAS) with reduced acoustic signatures. Emphasis will be placed on modeling the performance and noise characteristics of small propellers and rotors operating at low tip speeds and low Reynolds numbers; typical of the platforms that fall under the Group 1 UAS category defined by the US Department of D ...

    SBIR Phase I 2019 Department of DefenseArmy
  6. Chemical Hydrogen Gas Generator Based on Aluminum Alloy/Water Reaction

    SBC: TDA RESEARCH, INC.            Topic: A19022

    Hydrogen gas (H2) has many benefits as an alternative energy source for fossil fuels, including environmental and energy supply benefits. Hydrogen can be used to produce electricity in fuel cells and hydrogen internal combustion engines (hydrogen energy density: ~140 MJ/kg). Producing H2 at the point-of-need is especially attractive to mobile Military operations. The cost of JP-8 when fully burden ...

    SBIR Phase I 2019 Department of DefenseArmy
  7. Chroma-Therm: Advanced LWIR Multi-Band Imaging System

    SBC: RPX TECHNOLOGIES INC            Topic: A19042

    This proposal seeks to enhance warfighter situational awareness and improve threat detection by developing an advanced thermal imager that processes and presents full-motion multi-band LWIR chroma video in accord with human color-vision processing. This will be useful in a variety of applications, including by dismounted soldiers (helmet-mounted or handheld), on small UAVs, as well as supporting a ...

    SBIR Phase I 2019 Department of DefenseArmy
  8. Adaptive Optics System for a High Energy Laser Weapon System

    SBC: Guidestar Optical Systems, Inc.            Topic: A19087

    As adversarial threats are developing longer range capability, HEL systems must counter these developments by achieving lethal effects at longer ranges. Adaptive Optics (AO) is a key technology that enables longer range engagements by compensating the effects of atmospheric turbulence. Guidestar Optical Systems, Inc. (Guidestar) has developed two innovative concepts for AO system architectures tha ...

    SBIR Phase I 2019 Department of DefenseArmy
  9. Innovative Primer Design for Large Caliber Ammunition

    SBC: Capco Inc.            Topic: A19070

    The current 120mm tank ammo primer design is outdated, difficult to manufacture, and in need of a technical refresh taking advantage of modern state-of-the-art design and manufacturing techniques. This proposal consists of redesigning the igniter to be less complex (reduce number of components and increase manufacturability) and HERO safe and evaluating a replacement for the main primer charge ben ...

    SBIR Phase I 2019 Department of DefenseArmy
  10. Novel Combustible Cartridge Cases for Next Generation Small Arms Ammunition

    SBC: Rocky Mountain Scientific Laboratory, LLC            Topic: A18013

    The loadout that a deployed soldier carries is between 97-135 lbs, approximately 5lbs of which are inert brass. This weight not only reduces the soldier’s responsiveness during battle but can increase fatigue. Much time and money has been spent on reducing ammunition weight by replacing heavy brass casings with steel or polymers. While these show promise, a combustible cartridge case will not on ...

    SBIR Phase I 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government