You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Commercializing the Effective K-3 Assessment to Instruction (A2i) Intervention to Reduce Cost and to Scale Access to the Benefit of More Students

    SBC: Learning Ovations, Inc.            Topic: N/A

    Purpose: Students who fail to achieve proficient levels of literacy are at increased risk for grade retention, referral to special education, and dropping out of high school. The kindergarten through 3rd grade years are particularly important for students to gain a strong foundation in reading as those who continue to struggle with reading are significantly less likely to achieve reading proficien ...

    SBIR Phase I 2014 Department of Education
  2. CFD-Based Over-Determined Trim Analysis for Optimum Aerodynamic Efficiency

    SBC: ZONA TECHNOLOGY INC            Topic: A304

    The overall objective of this Phase I project is to develop a nonlinear trim module in FUN3D for enabling the determined and over-determined trim analyses to be performed by FUN3D with static aeroelastic effects. Based on an optimization formulation, the over-determined trim analysis can determine the optimum control surface scheduling of multiple control surfaces to achieve the best aerodynamic e ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  3. Finite Internal Temperature Slide for Use with Colloid Experiments

    SBC: TECHSHOT, INC.            Topic: H1002

    The Light Microscopy Module (LMM), developed and managed by NASA Glenn Research Center (GRC), is producing fascinating results. LMM will yield even more astonishing results with the addition of enhancing subsystems. Techshot is developing one such subsystem, the LMM-Dynamic Stage (LMM-DS), which will satisfy a host of new experiments. However, GRC has many more researchers awaiting enhancing subsy ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  4. A Simple, Robust Lightweight Microscopy and Sample Processing System for Scientific and Commercial Research on ISS

    SBC: TECHSHOT, INC.            Topic: H1002

    A light-weight, user-friendly, algorithmically or remotely controlled microscope, not purchased from a microscope company, coupled to fluid sample processing and sample changing systems is proposed. It is an easy-access light microscope consisting of a novel illuminator-condenser with no moving parts, a sample-processing remotely controlled translating stage using hollow slides, a high-definition ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  5. Additive Manufacturing Synthesis of Novel Materials for 3000 Degree

    SBC: ATS-MER, LLC            Topic: H504

    Environmentally durable material systems capable of operating at temperatures from 1500 to 3000?C while maintaining structural integrity are enabling for future hot structure hypersonic vehicles. State-of-the-art ceramic matrix composite CMC's and other established refractories lack stability at these high temperatures. The plasma transferred arc (PTA) additive manufacturing (AM) process has dem ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  6. Heterogeneous Chip Integration for GHz Systems

    SBC: INDIANA INTEGRATED CIRCUITS LLC            Topic: S102

    Indiana Integrated Circuits, LLC (IIC) proposes to develop the customizable, high-performance microchip interconnect technology called Quilt Packaging (QP) to address NASA's requirement for high performance integration of heterogeneous microwave systems. QP is an affordable, scalable, patented edge-interconnect technology for joining microchips of disparate materials and/or process technologies i ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  7. Parallel Enhancements of the General Mission Analysis Tool

    SBC: Thinking Systems, Inc.            Topic: H904

    The General Mission Analysis Tool (GMAT) is a state of the art spacecraft mission design tool under active development at NASA's Goddard Space Flight Center (GSFC). GMAT is an open source project, periodically releasing code on publicly accessible repositories. The tool has recently been operationally certified for use planning maneuvers for the Advanced Composition Explorer (ACE). The current ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  8. Seed-Derived Second Harmonic Source for In-Situ Alignment and Calibration of Trace Gas Measurement Instruments

    SBC: ADVR, INC.            Topic: S108

    This SBIR Phase I effort will demonstrate the feasibility of developing a tunable, high-power, narrowband seed laser source integrated with a broadband, waveguide-based second harmonic generation (SHG) module to allow in situ alignment, component testing and calibration across the tuning range of fiber-based lidar systems for measuring atmospheric oxygen concentrations. The lidar is being develope ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  9. Integrated Electrolysis & Sabatier System for Internal Reforming Regenerative Fuel Cells

    SBC: PARAGON SPACE DEVELOPMENT CORPORATION            Topic: H801

    Paragon Space Development Corporation® (Paragon) will advance our Solid Oxide Electrolysis / embedded Sabatier reactors (SOE/ESR) system to generate power from its oxygen (O2) and methane (CH4) products. Leveraging our SOE/ESR technology, Paragon can offer a carbon deposition resistant system capable of internally steam reforming CH4 and generating power in fuel cell mode. Minimal water is requir ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  10. Linearized FUN3D for Rapid Aeroelastic and Aeroservoelastic Design and Analysis

    SBC: ZONA TECHNOLOGY INC            Topic: A301

    The overall objective of this Phase I project is to develop a hybrid approach in FUN3D, referred herein to as the Linearized FUN3D, for rapid aeroelastic and aeroservoelastic (ASE) design and analysis. The Linearized FUN3D solves a linearized Euler equation with a transpiration boundary condition using the FUN3D steady N-S solution as the steady background flow to efficiently generate a Reduced O ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government