You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Assembly Advisor

    SBC: Creatibility Concepts            Topic: N/A

    This project researches and develops natural support mechanisms for people with intellectual disabilities that facilitate greater opportunities and independence in employment settings. This project demonstrates the technical merit, feasibility, and cost effectiveness of combining state-of-the-art portable wireless technology and sensor technology with an innovative approach to develop the first se ...

    SBIR Phase I 2010 Department of Education
  2. myPad

    SBC: Creatibility Concepts            Topic: N/A

    This project demonstrates the technical merit, feasibility, and cost effectiveness of combining portable console technology with an innovative approach and state-of-the-art software to deliver a universal console system capable of removing barriers in independent living settings. Phase I specifically focuses on helping aging adults safely and independently accomplish typical instrumental activitie ...

    SBIR Phase I 2010 Department of Education
  3. Sensor System for Super-Pressure Balloon Performance Modeling

    SBC: Anasphere, Inc            Topic: S310

    Long-duration balloon flights are an exciting new area of scientific ballooning, enabled by the development of large super-pressure balloons. As these balloons represent a new form of balloon technology, it follows that there is much to be learned about how these balloons behave in flight. There is a need to collect data on the balloon platform itself in order to better characterize its in-fligh ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  4. Dropsonde System for Unmanned Aerial Vehicles

    SBC: Anasphere, Inc            Topic: S309

    Unmanned Aerial Vehicles (UAVs) are assuming more numerous and increasingly important roles in global environmental and atmospheric research. There is a corresponding growth in equipment needs for UAVs so that they may meet their mission goals. Some critical measurement needs can only be satisfied by in-situ measurements. Key examples of such measurements include detailed atmospheric profiles, ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  5. Uncertainty Quantification in Aerodynamics Simulations

    SBC: Jabiru Software and Services            Topic: A205

    The objective of the proposed work (Phases I and II) is to develop uncertainty quantification methodologies and software suitable for use in CFD simulations of aerodynamic flows, ranging from sub-sonic to hypersonic. We will address both pressure and density-based methods, as well as the class of algorithms addressing all-Mach number flows. The software developed here will be based on an existing ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  6. Analysis and Design Tools for Fluid-Structure Interaction with Multi-Body Flexible Structures

    SBC: Jabiru Software and Services            Topic: A205

    The overall objective of this proposal (Phases I and II) is to develop a robust and accurate solver for fluid-structure interaction computations capable of addressing multi-body flexible structures as well as rigid body motion. The fluid flow solution will be performed using our unstructured solution-adaptive flow solver TETHYS. We propose to develop a structural solver based on the Galerkin finit ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  7. Observation Platform for Dynamic Biomedical and Biotechnology Experiments using the ISS Light Microscopy Module

    SBC: TECHSHOT, INC.            Topic: O303

    The proposed "Observation platform for dynamic biomedical and biotechnology experiments using the ISS Light Microscopy Module" consists of a platen sized to fit the stage of NASA's Light Microscopy Module (LMM) on the International Space Station (ISS). At the heart of the innovation is a small hollow microscope slide into which specimens and reagent solutions can be injected by a combination of s ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  8. In Situ Metrology for the Corrective Polishing of Replicating Mandrels

    SBC: Zeeko Technologies, LLC            Topic: S205

    The International X-Ray observatory (IXO) is due to be launched in 2021. The core of the instrument is a very large (3.2 meter diameter) Wolter I optic, to be assembled from approximately 13,000 individual elements. Each element will, in turn, be created by 'slumping' glass over a precision mandrel, of which there must be in excess of 700. In addition to the very large size of the mandrels (up t ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  9. Discrete Geometry Toolkit for Shape Optimization

    SBC: Optimal, LLC            Topic: A208

    Simulation-based design optimization has been steadily maturing over the past two decades, but not without its own unique and persistent challenges. The proposed project will develop a novel solution to one of the long-standing bottlenecks in simulation-based design optimization. Particularly, we will develop a flexible geometry toolkit for shape parameterization and modification as required for d ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  10. A Compact, Waveguide Based Programmable Optical Comb Generator

    SBC: ADVR, Inc            Topic: T401

    This NASA Phase I STTR effort will establish the feasibility of developing a compact broadband near to mid-IR programmable optical comb for use in laser based remote sensing and communications. The comb generator will use a waveguide-based optical parametric gain block technology that can have ultra wideband (>250nm) operation with very high gain (>25dB) in a very compact footprint. This approach ...

    STTR Phase I 2010 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government