List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Blast Overpressure Omnidirectional Measurement Device

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A18078

    Mainstream proposes developing a blast overpressure omnidirectional measurement (BOOM) device that detects, records, and transmits captured data for blast events experienced by individual personnel. The BOOM device is composed of a microcontroller that collects, stores, and transmits data collected from several miniature pressure transducers placed on personnel. The sensors enable capture of the p ...

    SBIR Phase I 2019 Department of DefenseArmy
  2. Waterproofing Cargo Airdrop Equipment

    SBC: RESODYN CORPORATION            Topic: A16114

    The U.S. Army is interested in the development of innovative coating technologies to allow current U.S. Army airdrop related hardware and equipment to survive fresh and salt water operations with increased reliability and without damage and significant maintenance impact. Resodyn Corporation proposes for development a durable, moisture-impermeable, thermoplastic coating material to address the U.S ...

    SBIR Phase II 2019 Department of DefenseArmy
  3. Protective CMAS Coatings for SiC CMCs

    SBC: TECHNOLOGY ASSESSMENT AND TRANSFER, INC.            Topic: A17030

    Graded rare earth hafnia multilayer coatings with three different top layer compositions will be deposited on SiC CMC and alumina substrates, characterized by XRD, SEM and EDS, and subjectedtoflowing air-steam at 50% relative humidity without and with CMAS in both isothermal and thermal cycling conditions.Post test analyses include weight change, SEM microstructure characterization changes, XRD/ED ...

    SBIR Phase II 2019 Department of DefenseArmy
  4. Lightweight, Durable, Low-Cost Recuperators Designed for Integration with Small Turbo-generators for Future Army Unmanned Aerial Systems

    SBC: Florida Turbine Technologies Inc.            Topic: A17001

    FTT proposes to design, build, and test an advanced light-weight, low-cost, and durable additively manufactured recuperator.Testing will be first performed in a component rig with similar engine conditions to increase TRL to 5.Following successful completion of the component rig, FTT will mate the recuperator up with a 5KW turbogenerator and run the assembly at FTT Small Engine Test Facility in or ...

    SBIR Phase II 2019 Department of DefenseArmy
  5. Adaptive Armor Actuator Mechanisms

    SBC: INNOVITAL SYSTEMS, INC.            Topic: A17115

    Conventional vehicle armor has evolved considerably over the years, including homogeneous plates, composite materials, and reactive substrates.Variable orientations have also been implemented, including curved, sloped, angled, and spaced plates.A common characteristic among these conventional armor solutions is that they are static and incapable of changing in response to local threats.Adding a me ...

    SBIR Phase II 2019 Department of DefenseArmy
  6. Bio-inspired Soft-Hard Material Integration for High Damage-tolerant Munitions (BioHDM)

    SBC: Intelligent Automation, Inc.            Topic: A18012

    Natural biological materials possessing hierarchical structures often exhibit extraordinary material properties, which have become important inspirations for high-performance material design. In this study, Intelligent Automation Inc. (IAI) along with University of Virginia (UVA) propose to develop a bioinspired adaptive material with high damage tolerance for the next generation smart lightweight ...

    SBIR Phase I 2019 Department of DefenseArmy
  7. Intelligent Trauma Intervention Algorithms for a Ruggedized Autonomous Combat Casualty Care Capability

    SBC: Reliance Robotics Incorporated            Topic: A18064

    The objective of this project is to design, develop, and demonstrate intelligent algorithms for combat casualty care embedded in a small, low cost, high-performance, open architecture computer system.In this project we focus on critical interventions in treatment of combat casualties, specifically hemorrhage control and airway management. In related work MDC is developing tools for combat casualty ...

    SBIR Phase I 2019 Department of DefenseArmy
  8. Affordable Surveillance Autonomous Platform

    SBC: Land Sea Air Autonomy            Topic: A18085

    LSA Autonomy proposes the Affordable Security Autonomous Platform (ASAP).The autonomy software will be leveraged from LSA Autonomys Mobile Detection Assessment and Response System (MDARS) vehicle, a proven fully autonomous security platform with over 9000 miles logged in the field.Further, lessons learned from the MDARS military-grade sensor payload will be integrated into the low cost COTS sensor ...

    SBIR Phase I 2019 Department of DefenseArmy
  9. Scenario-based Training Content Discovery, and Adaptive Recommendation

    SBC: Design Interactive, Inc            Topic: A18092

    A need exists for tools that assist Soldiers in identifying appropriate training scenarios based on a units learning objectives and developing training roadmaps to guide the progression from scenario to scenario and learning objective to learning objective to accelerate readiness. This efforts objective is to develop a web-based software tool that aids in the identification of suitable training sc ...

    SBIR Phase I 2019 Department of DefenseArmy
  10. Scalable, Non-Traditional Additive Manufacturing printing of inexpensive metallic structures

    SBC: 3DFlexible Inc            Topic: A18104

    Metal Additive Manufacturing (AM) is the ultimate prize in 3D printing technology because this technology could spread beyond the prototyping and customized production phases and revolutionize manufacturing, supply chains and logistics. However, the ARMY states that no current AM processes meet its needs to print large metallic structures. To meet the Armys urgent need, we propose to develop and v ...

    SBIR Phase I 2019 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government