You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Compressive Spectral Video in the LWIR

    SBC: PHYSICAL SCIENCES INC.            Topic: A13AT015

    Physical Sciences Inc. and Colorado State University will develop an innovative sensor that enables low-cost infrared hyperspectral imaging though the use of novel sampling algorithms which provide real-world chemical plume detection capability with compressed data and a hardware configuration which enables high frame rate capture of full 2D spatial and 1D spectral data. Compressive sensing techn ...

    STTR Phase I 2014 Department of DefenseArmy
  2. Terrain Impact Decision Extensions (TIDE)

    SBC: CHARLES RIVER ANALYTICS, INC.            Topic: A13019

    The US Army faces a significant burden in planning sustainment operations. Currently, logistics planners must manually evaluate potential emplacement sites to determine their terrain suitability. Sites subject to rainfall-runoff responses such as ponding are ill-suited for emplacements, but evaluating the likelihood of such responses requires significant time and expertise. To reduce the time and ...

    SBIR Phase I 2014 Department of DefenseArmy
  3. Nano-Inspired Broadband Photovoltaics Sheets

    SBC: MAGNOLIA OPTICAL TECHNOLOGIES, INC.            Topic: A13020

    This proposed Phase I SBIR program with the US Army will focus on demonstrating ultra-low dark current in flexible, high-efficiency photovoltaic cells with nano-enhanced absorbers. By extending infrared absorption, power conversion efficiencies in single-junction, nano-enhanced solar cells can potentially meet or even exceed the Shockley-Queisser limit. Novel device designs utilizing advanced ba ...

    SBIR Phase I 2014 Department of DefenseArmy
  4. Printed, Flexible Ultracapacitors Based on Novel, High-Performance Carbon Nanomaterials (1000-262)

    SBC: SI2 TECHNOLOGIES, INC            Topic: A13AT003

    SI2 Technologies, Inc. (SI2) proposes to develop printed, high-performance ultracapacitors to meet the Army"s need for lightweight energy storage. SI2 will leverage its demonstrated expertise in ink jet printing and our partner"s expertise with carbon nanoparticle synthesis to develop low-cost, flexible, printed ultracapacitors. SI2 has considerable experience in the roll-to-roll deposition of ...

    STTR Phase I 2014 Department of DefenseArmy
  5. Nanofibers for Broadband Spectral Obscurant Applications

    SBC: PHYSICAL SCIENCES INC.            Topic: A12aT024

    Obscurant materials are used to defeat threats in all areas of the electromagnetic spectrum. New Army requirements have been established for novel, multi-spectral, high performance obscurants to defeat a range of threats with a single material system. On a Phase I program Physical Sciences, Inc. (PSI) coupled inherently conductive polymers (ICP) with graphene like structures to provide enhanced ...

    STTR Phase II 2014 Department of DefenseArmy
  6. Advanced Robot Training Interface

    SBC: Energid Technologies Corporation            Topic: OSD13HS1

    Energid Technologies proposes a software architecture and supporting implementation focused on training robots. Currently, robot training for complex tasks often involves writing software, which is impractical in the field. To address this, Energid will leverage its commercial Actin robot control and simulation software to create a new open interface that will allow researchers and developers to s ...

    SBIR Phase I 2014 Department of DefenseArmy
  7. Anthropometric Casualty Estimation Methodologies

    SBC: Technology Solutions Experts, Inc.            Topic: A12096

    The design of Personal Protective Equipment (PPE) for force protection is critical for Soldier survivability and effectiveness in a range of combat operations. The Army needs: (1) new anthropometric casualty estimation tools and (2) the integration of these tools with constructive simulation, enabling the study of relationships and tradeoffs between factors such as armor, coverage, weight, volume, ...

    SBIR Phase II 2014 Department of DefenseArmy
  8. Synthesis and Characterization of Halogenated Cyclic Nitramines

    SBC: PHYSICAL SCIENCES INC.            Topic: A12011

    The Army recognizes a continuing need for more powerful high explosives that have improved energy density. To increase the energy of nitramine materials further, a highly promising strategy is to modify the inherent crystalline density of RDX/HMX materials by structural substitution of hydrogen atoms with halogen atoms. In the Phase I program, Physical Sciences Inc. (PSI) demonstrated that direct ...

    SBIR Phase II 2014 Department of DefenseArmy
  9. Advanced Electromagnetic Induction (EMI) Techniques for Buried Explosive Hazard Detection and Characterization

    SBC: White River Technologies Inc            Topic: A12040

    Abstract: Due to the highly variable, often clutter-ridden, and sometimes hostile environments in which Buried Explosive Hazards (BEHs) reside, the challenge of clearing areas through mounted or dismounted operations is a formidable one. The improvised nature of re-used munitions and detonating devices, as well as the variability of homemade explosives constituents requires a technology capable of ...

    SBIR Phase II 2014 Department of DefenseArmy
  10. Dual-Mode Continuous-Wave Ladar and Optical Communications System

    SBC: Bridger Photonics, Inc.            Topic: A12089

    Because the data products generated by modern imaging ladar systems are inherently large in information content, there is currently a severe bottleneck in the communications of these products to end users, particularly when full-waveform recovery is desired. During the Phase I effort, Bridger demonstrated that their 3D imaging system architecture was ideally suited for seamless integration of high ...

    SBIR Phase II 2014 Department of DefenseArmy
US Flag An Official Website of the United States Government