You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Rapid Scene Creation for Multispectral Terrain Signature Models and Simulations

    SBC: Torch Technologies, Inc.            Topic: A12085

    Torch proposes a holistic, efficient, high fidelity approach for development of terrain models suitable for use in high fidelity EO/IR rendering applications and simulations. Torch will decrease development complexity and timelines through the generation of efficient characterization algorithms, artifact rectification algorithms, rapid clutter classification, and discrete element creation algorith ...

    SBIR Phase II 2014 Department of DefenseArmy
  2. Oriented Enzymatic Electrodes with Enhanced Charge Transfer

    SBC: CFD Research Corporation            Topic: A12aT011

    Our objective is to significantly increase the electron transfer efficiency of the enzyme-catalyzed reactions at electrodes and thereby establish a new state-of-the-art power source for military and commercial systems. The approach is to develop a novel method for orienting enzymes immobilized onto the electrode surface that results in facilitated charge transfer. The proposed bio-electrode techn ...

    STTR Phase II 2014 Department of DefenseArmy
  3. Dual-Mode Continuous-Wave Ladar and Optical Communications System

    SBC: Bridger Photonics, Inc.            Topic: A12089

    Because the data products generated by modern imaging ladar systems are inherently large in information content, there is currently a severe bottleneck in the communications of these products to end users, particularly when full-waveform recovery is desired. During the Phase I effort, Bridger demonstrated that their 3D imaging system architecture was ideally suited for seamless integration of high ...

    SBIR Phase II 2014 Department of DefenseArmy
  4. An Integrated Field-deployable Nanofluidic Sequencing Platform for Polypeptides

    SBC: CFD Research Corporation            Topic: A13097

    Automated, fieldable polypeptide sequencing is a critical need for enhanced biodetection and disease protection. Existing polypeptide sequencing methods are time-consuming, bulky, labor-intensive, costly, and consequently ill-suited for field deployment.

    SBIR Phase I 2014 Department of DefenseArmy
  5. LONGLIFE Battery for Electronic Health Monitoring

    SBC: CFD Research Corporation            Topic: A14005

    The U.S. Army is seeking a long life energy solution that delivers high energy density, good reliability, long shelf-life, and improved safety for monitoring the health of electronic components in remote and sometime harsh locations. Current batteries can only deliver limited lifetime (perhaps 5 years) upon discharge, while our proposed technology has the ability to deliver more energy for extende ...

    SBIR Phase I 2014 Department of DefenseArmy
  6. High Porosity Ceramic Matrix Composite for Cooling and Drag Reduction

    SBC: THE SENTIENT CORP            Topic: A14007

    Historically, the porosity associated with ceramic matrix composite structures has been viewed as a detriment for many missile applications. The standard practice is to perform several treatment/retreatment processes to reduce the porosity to an acceptable level while increasing the strength of the structure. The processing methods inherent to the production of many composite materials may provid ...

    SBIR Phase I 2014 Department of DefenseArmy
  7. Wide Field of View Primary Optic for Semi-Active Laser Sensor

    SBC: Polaris Sensor Technologies, Inc.            Topic: A14008

    The US Army employs Semi-Active Laser seeker (SAL-seeker) sensors on several missile platforms to provide precision guidance to targets. The sensor for a SAL-seeker is typically a narrow FOV quad-cell based sensor integrated onto a gimbal, providing a wide Field of Regard to acquire and lock onto a laser designator beam for guidance to the target. The objective of this work is to develop a ...

    SBIR Phase I 2014 Department of DefenseArmy
  8. Novel Cathodes for High Capacity Thermal Battery

    SBC: CFD Research Corporation            Topic: A14009

    The current state of the art thermal battery technologies will not be able to meet future requirements that call for higher power and capacity with a smaller footprint. The principal avenue for increasing the capacity of thermal battery is to identify and develop new electrode materials that provide higher specific capacity and power performance. The overall objective of the proposed effort is to ...

    SBIR Phase I 2014 Department of DefenseArmy
  9. Fragmentation Data Collection and Analysis for JMEMs Arena Tests

    SBC: FREENT TECHNOLOGIES, INC.            Topic: A14010

    FreEnt Technologies, Inc. proposes to combine Synthetic Aperture Array (SAR) and Electromagnetic Induction (EMI) technologies to develop a witness panel scanning system, which we call the Automated Fragmentation Data Collection System (AFDCS) to meet the needs of AMRDEC testing debris and fragment characterization requirements. The baseline concept consists of a table of frame for placement of Ce ...

    SBIR Phase I 2014 Department of DefenseArmy
  10. Whole-body Anthropometric Design Models for Protective Equipment Design

    SBC: CFD Research Corporation            Topic: A12096

    The goal of this proposal is to develop whole-body anthropometric

    SBIR Phase II 2014 Department of DefenseArmy
US Flag An Official Website of the United States Government